Instruhub

TECLOCK- Auto-Clutch Test Indicator:

• As miniature bearing (pivot ball bearing) is used for stylus revolution bearing. It is not affected by shaft looseness and indication is stable.

• Measuring direction is automatically changed for proper and opposite by auto-clutch mechanism without changing lever. It is always read accurately in any case, as stylus rotates in clockwise direction.

• Stylus can be set at any desired position of angle of 220 circle.

• Stem with dovetail groove (Option) can be mounted to 2 points of front and back part.

• A carbide ball stylus is provided for less abrasion and stylus is made of stainless steel.

• Stylus and pointer are anti-magnetic and not affected by magnetism.

Model:

·Graduation 0.01mm

·Measuring Range 0.8mm

·Graduation 0.01mm

·Measuring Range 0.8mm

·Graduation 0.01mm

·Measuring Range 0.8mm

·Graduation 0.01mm

·Measuring Range 0.8mm

·Graduation 0.001mm

·Measuring Range 0.2mm

TECLOCK- Lever Test Indicator for Deflection:

Features:

•This is the special indicator to check deflection level not deflection volume.

• Deflection which cannot be measured with standard type can be checked by installing stylus depending on the shape of work piece.

• Unit is not available for gradation line. (Calibration certificate cannot be issued.)

• Standard price of LR-316 does not include stylus. Select the stylus from the list below and use indicator by combining it.

Specifications:

Model:LR-316 for Run-out (TIR) measurement

Weight (g):70

• One counter reads in the plus direction and another in the minus direction, so incremental measurement can be made in either direction.
• Carbide tipped scriber.
• With driving wheel
• Made of stainless steel (except the base)
• Supplied with dust cover

• Graduation 0.02mm/0.001"
• Adjustable main scale to set zero
• Carbide tipped scriber
• Made of stainless steel (except the base)
• Satin chrome plated scale 
• Supplied with magnifier
• With fine adjustment
• Supplied with dust cover

Baker- Digital Vernier Caliper – SDN Series:

SDN series Digital vernier caliper / Digital caliper available from 0-150 to 0-300mm range. Robust, hardened & ground SS jaws & beam. 9.6mm tall high contrast liquid crystal display. User friendly, 3V battery.

· Every gauge carries a calibration certificate giving actual values

· Robust, Hardened and Ground stainless steel jaws and beam

· Accuracy as per DIN 862

· Attractive shape and elegant design complimented by uncompromising performance

· 9.6 mm tall, high contrast Liquid Crystal Display significantly augments visibility and minimizes user fatigue

· All three ranges of calipers are fitted with thumb-roller to improve quality of measurement

· Easy and quick operation (user friendly)

· Battery changeover is fast, easy and reliable

· All three varieties of digital calipers are capable of External, Internal, Step and Depth measurement

· Display refresh rate greater than 7 / sec

· Power supply 1 Lithium battery, type CR2032, 3V, 220 mAh

· Working temperature 5 to 40 °C

· Max. slider speed 1.5 m/s

Specification

• Measure 30°/45°/60° chamfer dimension
• Resolution : 0.01 mm/ 0.0005"
• Buttons : on/off , zero, mm/inch
• Automatic power off, move the digital unit to turn on power 
• Battery CR2032, data  output
• Made of stainless steel 
• Optional accessory ; data output cable  (code 7315-21, 7302-21)

The INSIZE SPM-4000-U Roughness Measuring Machine has the following specifications:

• X axis measuring range: 100mm
• X axis resolution: 0.2um
• X axis Straightness: 0.5um/100mm
• X axis moving speed: 0.1-10mm/s
• Z axis measuring range 620um
• Z axis resolution 0.001um
• Z axis linear accuracy 7nm+3.5%
• Z axis moving speed 0.5-10mm/s
• Z axis repeatability 1<2nm
• Radius/angle of stylus 5um/90
• Cut off length 0.025/0.08/0.25/0.8/2.5/8mm
• Number of cut-offs 2-7
• Measuring unit um
• Drive mode motor
• Travel of Z axis 320mm
• Dimension (LxWxH) 47.2 x 27.6 x 70.1″

TECLOCK- Lever Type Test Indicator:

• Measuring direction can be changed with change lever.

• Main bearings are jeweled for all models.

• A carbide ball stylus is provided for less abrasion.

• Stylus is made of φ2mm stainless steel and it is unique threaded type which can be changed easily.

• Stylus and pointer are anti-magnetic and not affected by magnetism.

• Due to the low measuring force, this is suitable for measurement of thin work piece as well.

Model:

1.      LT-310- Small and standard type

Graduation 0.01mm

Measuring Range 0.8mm

2.      LT-311- Small and large face type

Graduation 0.01mm

Measuring Range 0.8mm

3.      LT-314- Graduation width large type

Graduation 0.01mm

Measuring Range 0.5mm

4.      LT-315- Standard type

Graduation 0.01mm

Measuring Range 0.8mm

5.      LT-316- Long stylus type

Graduation 0.01mm

Measuring Range 1.0mm

6.      LT-370- High precision type

Graduation 0.002mm

Measuring Range 0.28mm

TECLOCK- PS Type Test Indicator:

Shock from the angle excepting measuring direction can be avoided and body is protected by Teclock original shock preventing mechanism (PS mechanism) of center of stylus.

Major dimension is equal to LT-315 and LT-316.

Model:

·Graduation 0.01mm

·Measuring Range 0.8mm

·Graduation 0.01mm

·Measuring Range 1.0mm

FEATURES:

· Rigid STAINLESS STEEL Construction

· MM/INCH conversion

· L C : 0.01mm/0.0005 IN

· Ingress Protection : IP 54

· Large Liquid Crystal Display for good visibility.

· Accuracy As per DIN 862 STANDARD

· Powerful & Original lithium battery. type CR2032

· Working temp. 5 – 40 °C

Specification

MODEL 56 Plunger Dial Gauge Range 0.8mm to 30mm / 0.08" to 1", Range 0.8mm/0.08inch, One revolution dial gauge. Shock proof, Hardened stem for free clamping, Rigid brass case.

Categories: DIAL GAUGES, Mechanical Plunger

·                     General Details

·                     Techical Info

·                     Order Enquiry

·                     Documents

·         Specification: IS, DIN, ANSI & JIS

·         Every plunger dial gauge carries a calibration certification giving actual values

·         Hardened stem for trouble free clamping

·         Spindle made of stainless steel

·         Fitted with tungsten carbide ball anvil

·         Rigid brass case for increased rigidity

·         Strong and smooth metal bezel

·         Supplied with tolerance pointers

·         Aesthetically appealing protective top cap in black color

·         Special dial Gauges for OEMs also manufactured on request

·         Complete spares and after sales service available

·         0.001mm x 1mm dial gauge fitted with 8 jewels and conforms to JIS B-7503

TECHNICAL DETAILS

MODEL 40 Mechanical SMALL diameter Plunger type Dial gauge, Fitted with Jewels, ideal for small bore gauges like 10 to 18mm, Tungsten carbide ball anvil, rigid case for increased strength.

Categories: DIAL GAUGES, Mechanical Plunger

·                      General Details

·                     Technical Info

·                     Order Enquiry

·                     Documents

·         Specification: IS, DIN, ANSI & JIS

·         Small diameter dial – convenient for use where space is limited

·         Ideal for small Bore Gauges like 10 to 18 mm

·         Jeweled to give accuracy and longer operational performance

·         Each gauge carries a calibration certificate giving actual values

·         Spindle made of stainless steel

·         Fitted with tungsten carbide ball anvil

·         Rigid case for increased strength

·         Strong and smooth metal bezel

·         Supplied with tolerance pointers

·         Aesthetically appealing protective top cap in black colour

·         Metric Gauges conform to company standard

·         Inch Gauges conform to ASME B89.1.10M

·         Special dial Gauges for OEMs also manufactured on request

·         Complete spares and after sales service available

MODEL 105 – K101 Mechanical LARGE Diameter plunger type Dial gauge for easy reading, Hardened stem for free clamping, Tungsten carbide ball anvil, Rigid brass case, Strong & smooth metal bezel, Spindle made of stainless steel.

Categories: DIAL GAUGES, Mechanical Plunger

·                     General Details

·                     Techical Info

·                     Order Enquiry

·                     Documents

·         Larger diameter face for easy reading

·         Every gauge carries a calibration certificate giving actual values

·         Hardened stem for trouble free clamping

·         Spindle made of stainless steel

·         Fitted with tungsten carbide ball anvil

·         Rigid brass case for increased rigidity

·         Strong and smooth metal bezel

·         Supplied with tolerance pointers

·         Aesthetically appealing protective top cap in black colour

·         Metric Gauges conform to company standard

·         Special dial Gauges for OEMs also manufactured on request

·         Complete spares and after sales service available

·          

·         TECHNICAL DETAILS

·          

MODEL 88 Mechanical large Diameter plunger type dial gauge with range 50mm/2inch. Used formeasuring larger range up 50mm.

Categories: DIAL GAUGES, Mechanical Plunger

·                      General Details

·                     Techical Info

·                     Order Enquiry

·                     Documents

·         Specification: IS, DIN, ANSI & JIS

·         The one revolution dial gauge eliminates reading errors due to multiple revolutions

·         Shock proof mechanism to absorb shock due to sudden spindle impact

·         Every gauge carries a calibration certificate giving actual values

·         Hardened stem for trouble free clamping

·         Spindle made of stainless steel

·         Fitted with tungsten carbide ball anvil

·         Rigid brass case for increased rigidity

·         Strong and smooth metal bezel

·         Supplied with tolerance pointers

·         Aesthetically appealing protective top cap in black colour

·         Special dial Gauges for OEMs also manufactured on request

TECHNICAL DETAILS

Dial indicator MarCator P1/2I
ANSI
Measuring span in mm: 0.25mm
Graduation value mm: 0.001
Figur on dial face: 0-5-0

Suppliers, dealers and importers of MarForm MMQ 400 In Ananthapur Chithoor, Cuddapah, Guntur, Srikakulam, East Godavari, .

TECLOCK-Standard Digital Thickness Gauge:

Models:

By the lifting of the anvil, can be measured 0-15mm

Resolution 0.001mm

Measuring Range 15mm

Indication Range 12mm

 (Lifting of anvil)

Ceramic Contact Point and Anvil

Insertion Depth 30mm Model

Resolution 0.01mm

Measuring Range 12mm

Ceramic Contact Point and Anvil

Insertion Depth 120mm Model

Resolution 0.01mm

Measuring Range 12mm

Ceramic Contact Point and Anvil

Conversional type without Anvil Adjustment.

Resolution 0.001mm

Measuring Range 12mm

Ceramic Contact Point and Anvil

Long stroke 25mm

Resolution 0.01mm

Measuring Range 50mm (Lifting of anvil)

Ceramic Contact Point and Anvil

TECLOCK- Digital Pipe Gauge:

Models:

• TPD-617A

·Resolution 0.01mm

·Measuring Range 12mm

·Anvil replaceable type

Resolution (mm): 0.01

Measuring Range (mm):12

Indication Error(μm): ±20

Measuring Force(N):1.5

Contact Point Form (mm): φ1.6 Ball

Weight (g): 255

• TPD-618A

·Resolution 0.01mm

·Measuring Range 12mm

Anvil replaceable type (option)

Resolution (mm): 0.01

Measuring Range (mm):12

Indication Error(μm): ±20

Measuring Force(N):1.5

Contact Point Form (mm): φ1.6 Ball

Weight (g): 260

• Precision multifunction, temp, frequency, voltage, and mA calibrator
• Calibrates thermocouples and RTD temperature instruments
• Stores up to eight calibration results in memory for analysis
• Built-in 24 V Loop Power Supply

Pressure Calibrator:

Our pressure equipment includes some of the world’s most popular digital gauges and calibrators for a variety of applications and markets.  Included are intrinsically safe "percent of reading" gauges and calibrators, differential pressure gauges, reference data recorders, external pressure modules, and unique pneumatic and hydraulic deadweight testers.  In many cases, one handheld calibrator can replace multiple instruments, reducing ongoing recalibration and maintenance costs.  Our recorders can collect readings as quick as ten times per second, and store up to 1 million data points.

• Pressure Tester
• Pressure Calibrator
• Pressure Pumps

Application:

Direct Pressure Measurement, Barometric Pressure Measurement, Maintenance of Calibration Standards and Test Equipment, Pump Testing

• SMALL RANGE DIGITAL HEIGHT GAUGE
• MEASURING RANGE 150MM
• RESOLUTION 0.01MM/0.0005"
• WITH FINE ADJUSTMENT
• ACCURACY +0.03MM
• BUTTONS: ON/ OFF, ZERO, MM/INCH
• BATTERY: CR2032
• MADE OF STAINLESS STEEL
• AUTOMATIC POWER OFF, MOVE THE DIGITAL UNIT TO TURN ON POWER
• SUPPLIED WITH CARBIDE TIPPED SCRUBBER
• AVAILABLE WITH A DATA OUTPUT OPTION

• Measure height difference of two surfaces.
• Accuracy : +0.02mm
• Resolution : 0.01 mm/ 0.0005"
• Buttons : on/off , zero, mm/inch
• Automatic power off, move the digital unit to turn on power 
• Battery CR2032, data  output
• Made of stainless steel 

• Absolute encoder, the original data remains after power off.
• Adjustable Resolution : 0.0002MM/0.00001" , 0.001/0.00005" , 0.01/0.0005"
• One turn of sleeve makes 5mm spindle feed 
• Measurement Accuracy is not affected by the use of sleeve
• Press the fork, the spindle retracts 3mm
• Linear ball bearings for ten million times use
• Carbide spindle and anvil 
• Measuring force 7-10N
• Customizable measuring force range 2-12N. Attention: small measuring force will reduce the dustproof and waterproof level
• Button function: data output, tolerance, data preset, data hold, measuring direction, max./min./TIR, power-off time, on/off, zero,mm/inch, adjust  resolution 
• Supplied with gage blocks for zero setting 
• Power: rechargeable battery, for 24 hours continuous working
• Data output
• IP65 waterproof
• Non - rotating

• Micrometers up to 500mm meet DIN863-4
• Graduation 0.01mm
• Carbide measuring faces
• Optional accessory: gage block accessory (code 6881), cylinder gage block (code 4001), caliper/height gage checker (code 6884)

The Insize 3224-120 Tubular Inside Micrometer – 2″ Travel has the following specifications:

• Measuring Range: 40-120″
• Travel of micrometer head: 2″
• Extension rods: 2″, 4″ (2pcs), 8″, 20″, 40″

Features:

• Graduation .001″.
• Accuracy: [.00005(3+n+L/2)]” n=number of rods, L=maximum measuring length (inch).
• Supplied with setting standards.
• Carbide measuring faces.

Insize Tubular Inside Micrometers – 2″ Travel:

• 3224-80 Tubular Inside Micrometer: 40-80″
• 3224-120 Tubular Inside Micrometer: 40-120″
• 3224-160 Tubular Inside Micrometer: 40-160″
• 3224-200 Tubular Inside Micrometer 40-200″

Insize Tubular Inside Micrometers – 1″ Travel:

• 3225-20 Tubular Inside Micrometer: 4-20″
• 3225-36 Tubular Inside Micrometer: 4-36″
• 3225-52 Tubular Inside Micrometer: 4-52″
• 3225-84 Tubular Inside Micrometer: 4-84″

• Graduation : 0.01mm
• Micrometer Head 50-63MM
• Travel of Micrometer Head - 13mm
• Supplied with setting standards carbide measuring  faces carbide measuring faces 
• Accuracy  : (3+n+L/50)μm 
• Supplied with setting standards, carbide measuring faces

The Insize 3225-36 Tubular Inside Micrometer – 1″ Travel has the following specifications:

• Measuring Range: 4-36″
• Travel of micrometer head: 1″
• Extension rods: 1″, 2″, 4″, 8″, 16″

Features:

• Graduation .001″.
• Accuracy: [.00005(3+n+L/2)]” n=number of rods, L=maximum measuring length (inch).
• Supplied with setting standards.
• Carbide measuring faces.

Insize Tubular Inside Micrometers – 1″ Travel:

• 3225-20 Tubular Inside Micrometer: 4-20″
• 3225-36 Tubular Inside Micrometer: 4-36″
• 3225-52 Tubular Inside Micrometer: 4-52″
• 3225-84 Tubular Inside Micrometer: 4-84″

Insize Tubular Inside Micrometers – 2″ Travel:

• 3224-80 Tubular Inside Micrometer: 40-80″
• 3224-120 Tubular Inside Micrometer: 40-120″
• 3224-160 Tubular Inside Micrometer: 40-160″
• 3224-200 Tubular Inside Micrometer 40-200″

INSIZE Metric Digital Non-Rotating Spindle Tubular Inside Micrometer

• 3634-350 Metric Digital Non-Rotating Spindle Tubular Inside Micrometer 100-350mm
• 3634-500 Metric Digital Non-Rotating Spindle Tubular Inside Micrometer 100-500mm
• 3634-1300 Metric Digital Non-Rotating Spindle Tubular Inside Micrometer 100-1300mm
• 3634-1500 Metric Digital Non-Rotating Spindle Tubular Inside Micrometer 100-1500mm
• 3634-2100 Metric Digital Non-Rotating Spindle Tubular Inside Micrometer 100-2100mm
• 3634-3100 Metric Digital Non-Rotating Spindle Tubular Inside Micrometer 100-3100mm
• 3634-4100 Metric Digital Non-Rotating Spindle Tubular Inside Micrometer 100-4100mm
• 3634-5100 Metric Digital Non-Rotating Spindle Tubular Inside Micrometer 100-5100mm
• 3634-6100 Metric Digital Non-Rotating Spindle Tubular Inside Micrometer 100-6100mm

• High Precision Electrochemical CO Sensor
• Large LCD Display with Digit & Bargraph
• Compact, Light & Easy to Carry
• ‘HOLD’ Current Date
• Low Battery Indication
• Auto Power Off

Torque Wrenches

Importers Distributors,Dealers of Griphold Adustable Torque Wrenches suppliers are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi,Thirupattur

Product Details:

Whether it is required for Heavy Engineering Industries, Oil & Gas Exploration, Mining, Petrochemicals, Chemicals & Fertilizers or Railways, we offer the complete range of precision engineered Hydraulic Torque Wrenches, which are designed for accuracy and ease of operation. In addition, we can also offer customized tools and equipment as per the required specifications. The range of our standard hydraulic torque wrenches is available in the following variants:

Variant Torque Range Square Drive:

§  TSD Series: Square Drive 183 Nm-48,670 Nm, 3/4" to 2-1/2"

§  GSC Combi Series: 1,910 Nm-38,200 Nm, 3/4" to 2-1/2" (Exchangeable Hexagon Cassettes suitable for hex A/F size: 24 mm to 155 mm)

§  TCD Models: 230 Nm-44600 Nm (Exchangeable Hexagon Cassette type suitable for hex A/F size 27 mm to 155 mm)

We also offer Electric/Pneumatically operated Power Pack - 700 Bar, suitable for operating one, two and four tools simultaneously.

TYPE 4228

Pistonphone Type 4228 is designed to be used for sound level meter and microphone calibration, and is ideal for in-field calibration over a wide range of temperature, humidity and pressure while still maintaining high accuracy. 

Pistonphone Type 4228 provides quick and accurate calibration of sound measuring equipment, such as microphones and sound level meters.

With the included barometer, it satisfies IEC 942 (1988) Class 1L while, with an external barometer, it is capable of satisfying Class 0L of IEC 942 (1988). It also satisfies ANSI S1.40-1984. It can be used in the field over a wide range of temperature, humidity and pressure while still maintaining high accuracy. It is extremely useful for supplying a standard sound pressure level.

• Laboratory standard
• Calibration of sound level meters and other sound measurement equipment
• Field and laboratory use

The calibration frequency, nominally 250Hz, is 251.2Hz ±0.1% as defined by ISO 266. The sound level produced by the pistonphone is nominally 124 ± 0.2 dB re 20 uPa at the reference conditions. Each pistonphone, however, is individually calibrated with an uncertainty of less than 0.09 dB and delivered with a calibration chart. When loaded with a microphone of one of the specified types, the uncertainty is less than 0.12 dB. The high sound level from the pistonphone allows correct calibration to be made in the field, even in very noisy surroundings.

The piston arrangement, based on an original Brüel & Kjær design, consists of two pistons mounted on opposite sides of a cam disc. The rotation of the cam disc forces the pistons to move, in phase, in and out of the coupler cavity. The design reduces cam disc eccentricity and harmonic distortion, and ensures maximum level stability.

The pistonphone is very simple to operate with only one control switch. It can be held in one hand in any position, while, with the free hand, the sensitivity of the sound measuring equipment is adjusted until a reading corresponding to the sound pressure level produced is obtained.

Baker- Spline Plug Gauge, Spline Ring Gauge:

FEATURES:

· Vast unmatched experience backed by around 500 standards from across the world, ensures the gauges are designed to the correct standards and manufactured to the correct tolerances

· Gauges are evaluated on a Gear Analyzer, which gives inspection charts detailing the errors

· Profile errors and tooth alignment are maintained within the allowable tolerance, resulting in the accumulative gauge variation being well within the allowable percentage variation of component tolerance, which can be matched by very few gauge manufacturers

· Low accumulative gauge variation results in gauge longevity, more tolerance for manufacturing, very low probability of component rework/rejection, leading to lower gauging cost/component, thus paying back the seemingly higher initial price

· Gauges are certified by UKAS accredited laboratory

· Equipped with latest CNC machines

· Small rings are wire-cut for better quality and stability

Specification

Baker- Variable Spline Indicator Gauge:

• Variable Spline Indicator Plug Gauge with setting Master Ring

• Variable Spline Indicator Ring Gauge with setting Master Plug

Video measuring instrument for machine tools (5314-R34)

Used machine tools such as EDM and CNC. Working together with linear scale and readout box of machine tools to make 2D measurement, especially suitable for small or thin parts. Can rotate crosshair and change its color. With laser indicator to locate position

Specification

• Adapter: magnet
• Screen size/pixel: 7“/1080P
• Visual accuracy: ±0.003 mm
• Magnification: 50X
• Angle resolution: 15’
• Automatic edge-find: after finding edge, the crosshair changes to green color and prompts
• Color of crosshair: red, blue
• Rotation of crosshair: manual
• Focus distance: 50 mm
• Light source: LED (adjustable brightness)
• Lithium battery: 4800 mA (for 4 hours working)
• Power supply: power adapter
• Dimension (LxWxH): 178x90x215 mm
• Weight: 2 kg

• 31/4 DIGITS
• 6,000 COUNTS
• COLOUR DISPLAY
• DATA HOLD
• MIN / MAX
• TRUE RMS
• AUTO POWER OFF
• DUTY CYCLE
• LIVE WIRE DETECTION

TYPE 5008

Type 5008 is a differential DC buffer intended to act as a buffer for high-impedance microphone polarization voltage, allowing the microphone polarization voltage to be measured using a common DC voltmeter.

Type 5008 is a high-impedance differential DC buffer intended to act as a buffer for high-impedance microphone polarization voltage, allowing the microphone polarization voltage to be measured using a common DC voltmeter.

For measuring 0V or 200V Polarization Voltage:

• At the input of a measuring instrument
• At the input of a microphone amplifier

The polarization voltage can either be measured in a 7-pin preamplifier socket or direct at the input terminal of a preamplifier.

Baker-Universal Magnetic Stand:

FEATURES:

· Magnetic stand accepts all dial indicators and dial test indicators

· The On-Off switch offers instant mounting and dismounting without any adverse effect to the indicators or workpiece surface

· With mechanical locking system.