Instruhub

Key features:

• Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
• GPS time synchronization: Correlate data with events or datasets from other instruments with precision
• Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances.
• Uninterrupted power supply (40 minutes): Never miss important events - even record the beginning and end of interruptions and outages to help determine the cause
• 10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event
• 2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
• Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode
• Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries
• Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions

Features:

• Power quality statistics according to EN50160
• Voltage event list (dips, swells and interruptions)
• Continuous recording of:
  • Voltage
  • Current
  • Power P, Q, S
  • Power factor
  • kWh
  • Flicker
  • Unbalance
  • Frequency
  • Voltage and current harmonics to the 50th / Interharmonics
  • THD
  • Mains signaling
• Triggered recordings
• Online mode (Oscilloscope, transients and events)
• Fast transient analysis up to 10 MHz

 

Specifications:

Standard Accessories : Manual, CR2032 battery 3.0 V

Dimension : 97(H) x 44(W) x 13(D)mm

Option : Lock

SPECIFICATION:

• Measuring range: 40dB-130dB (ref.20µPa)
• Frequency: 20Hz-12.5kHz
• Resolution: 0.1dB
• Accuracy: IEC 61672-1:2013 Class 2
• Frequency weighting: A weighting
• Response time: Fast (125ms), Slow (1s)
• Microphone: Pre polarization condenser microphone
• Refercner Direction: Axial direction of condenser microphone
• Power supply: 4x1.5V AAA batteries
• Dimension: 210×68×27mm
• Weight: 240g

FEATURES: 

• Automatic range conversion
• Over range indicator
• Maximum mode
• Data hold
• AC signal output: 0.707Vrms, impedance approx. 1000 DC signal output: 20mV/dB, impedance approx. 1kΩ

Suitable for testing the temperature field, humidity field, uniformity and volatility of various temperature (humidity) environment experimental equipment, industrial furnaces and verification furnaces

High definition LED large screen display: temperature, humidity, time
Exceeding limit alarm: buzzer alarm, digit/light flash alarm

Chiller Monitoring Device MOTWANE

 

Importers Distributors,Dealers of MOTWANE suppliers are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi,Thirupattur

IOC is a chiller monitoring device that needs to be installed nearby a chiller to measure its vital parameters such as voltage, current, energy, power of the chiller, compressor, cooling tower motor, and mechanical parameters such as pressure, the temperature of the water, the gas line of the evaporator, condenser, expansion valve, compressor, cooling tower.

IOC is a chiller monitoring device that needs to be installed nearby a chiller to measure its vital parameters such as voltage, current, energy, power of the chiller, compressor, cooling tower motor, and mechanical parameters such as pressure, the temperature of the water, the gas line of the evaporator, condenser, expansion valve, compressor, cooling tower. The data can be streamed & transmitted over a GSM Network to the cloud-based Motware application using MQTT protocol at the user defined intervals. Through the Motware platform, one can easily monitor the streaming parameters of the chiller. 

You can also monitor the parameters of the chiller with acute insights, trends, and analyses. It provides a comprehensive solution to harness the flexibility and scalability of the cloud which in turn automates the customized report generation and sharing.

 

Application

Chiller asset monitoring is essential for the proper functioning of the chiller and its components. Monitoring different individual asset component parameters will help to identify the issues and maintenance needs. The solution enables customers to monitor chiller components related data from anywhere and anytime. Through streamed data, the Motware application provides predictive analysis and trends about the monitored parameters which helps you to make an informed and productive decision. The energy efficiency and asset efficiency can be achieved by continuously monitoring the parameters at particular time intervals. The Motware application provides alerts and notifications based on the user defined set limits. Motware helps you to manage your product actively by predicting failures and notifying you in advance through alerts. The device can be easily integrated into the existing chiller setup through additional or the existing sensors. 

Our solution can be used at:

• Industrial segment
• Commercial complex and Malls
• Hotels and Resorts
• Institutional facilities
• Laboratories

Features

• Online streaming of chiller’s parameters
• Predefined set limit with real-time alerts and notifications
• Centralized monitoring of the chiller’s data
• Trend monitoring and predictive analysis based on monitored parameters
• Seamless integration to existing equipment
• Energy consumption analysis

Lutron MG-3002 Ac/DC Magnetic Meter

Features
* Wide range, general purpose magnetic measurement. for industrial, mechanical, material, electrical, laboratory field usage.
* Unit : G ( Gauss ), mT ( milli Tesla ).
* DC and AC magnetic field measurement
* DC Range : 300.00 mT/3000.0 mT.
AC Range : 150.00 mT/1500.0 mT.
* Resolution : 0.01/0.1 mT, 0.1/1 G.
* N pole/S pole indicator.
* Use Hall sensor with automatic Temp. compensation.
* Zero button for DC magnetic function.
* Separate probe, easy operation and convenient for remote measurement.
* Data hold function for freezing the desired value on display.
* Records Maximum and Minimum readings with Recall.
* RS232/USB computer interface.
* Microprocessor circuit assures maximum possible accuracy, provides special functions and features.
* Heavy duty & compact housing with hard carrying case, designed for easy carry out & operation.
* Auto shut off is available to save battery life.
* Power supply from batteries or DC 9V adapter in.

Specification
Circuit :Custom one-chip of microprocessor LSI circuit.
Display :LCD size : 52 mm x 38 mm dual function LCD display.
Sensor :Hall sensor.
Accuracy : DC ± ( 5 % rdg. + 10 digit ), AC ± ( 5 % rdg. + 20 digit )
Frequency Response :AC measurement :50 Hz / 60 Hz
Temp. Compensation for hall sensor :Probe head build the Temp. sensor for useing the ATC (automatical Temp. compensatioon).
Field Direction :Uniaxial.
Data Hold :Freeze the display reading.
Memory Recall :Maximum & Minimum value.
Display Sampling Time :Approx. 1 second.
Power off :Manual off by push button or Auto shut off to save battery life.
Data Output :RS 232/USB PC serial interface.
* Connect the optional RS232 cable UPCB-02 will get the RS232 plug.
* Connect the optional USB cable USB-01 will get the USB plug.
Operating TEmp :0 to 50 .
Operating Humidity :Less than 85% R.H.
Power Supply :DC 1.5 V battery ( UM4, AAA ) x 6 PCs, Alkaline/heavy duty type or equivalent.
Power Current :Approx. DC 20.5 mA .
Weight Approx. :270 g/0.60 LB. (include battery & probe)
Dimension Main instrument :200 x 68 x 30 mm, Probe :198 x 25 x 19 mm
Accessories Included :Instruction manual, Magnetic Probe, Hard Carrying case, CA-06
Optional Accessories :RS232 cable, UPCB-02, USB cable, USB-01, Data Acquisition software, SW-U801-WIN

We do undertake Servicing and repairing of Lutron MG-3002 Ac/DC Magnetic Meter lutron Range of products throughout india

Apart from supplying lutron Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are lutron Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Lutron MG-3002 Ac/DC Magnetic Meter Products in Chennai, Bangalore, Hyderabad, Pune, Mumbai, Delhi, Calcutta, Ahmedabad, Sricity, Ambattur, Guindy, Sriperumputhur, Oragadam, Tiruvallur, Trivandrum , Coimbatore, Tiruchy and etc..

Product Description:

 

With the data loggers testo 184 G1 for shock, humidity, and temperature, you can now monitor the transport of sensitive products such as electronics, art, pharmaceuticals, or foods over an unlimited operating time. More info on applications (link to tab Applications)

At their destination, a glance at the display or the LEDs tells you whether the configured limit values have been adhered to. To obtain detailed information, it is sufficient to connect the logger to a PC – a PDF report is immediately generated with all relevant data. For you to be able to work even more efficiently and conveniently with the data loggers, all required files and information are stored directly and securely in the testo 184 G1: Configuration file, instruction manual and PDF report of your recorded data.

Technical Data:

 

 

 

Temperature data logger for QC and Analysis:

temp-gard pro 6p, no probes-
Oven recorder - 6 measure points for QC & Optimization

• temp-gard 6p without probes
• easy-to-read color display
• temp-chart-software included
• light weight thermal barrier included
• ideal solution for industrial coating applications

Features:

Small Logger, Big Display

·        Small, modern data logger

·        Large color screen for mea­su­rement setup direct on logger

·        6 or 12 high-quality type "K" probes can be connected

·        Detection of connected probes

·        Temperature profile on display

·        USB interface provides easy data transfer for on-site evaluation

·        Long battery life with 2 AA Alkaline batteries

·        Certified high accuracy for long-term reliable results

Technical Specifications:

• Probe Type

no probe

• Temperature Range

0 - 400 °C

• Temperature Range

32 - 752 °F

• Accuracy

± 0.5 °C

• Probes

6 probe connections at logger, No probes*

• Resolution

0.1 °C (0.18 °F) from 0 - 400°C (32 - 752 °F)

• No. of Channels

6

• Sampling Interval

0.1 sec up to 5 min

• Thermal Barrier Dimensions

25.5 x 21.5 x 13.5 cm (10.0 x 8.5 x 5.3 in)

• Maximum Duration

at 100 °C, 8.5 hrs; at 200 °C, 2.5 hrs; at 250 °C, 2.0 hrs

General

• Memory

240,000 readings

• Interface

USB 2.0

• Display

Color, 7.9 x 6 cm (3.1 x 2.4 in)

• Battery Capacity

0.5 sec interval = 25 hrs (AA Alkaline)

• Weight

3.6 kg

• Weight

7.8 lb

Key features:

• Three-phase power quality recorder fully compliant to IEC 61000-4-30 Class-A and consistent with compliance testing
• Uses GPS time synchronization to correlate data with events or datasets from other instruments with precision
• Offers flexible and fully configurable thresholds and scale factors to allow users to define detailed criteria for detecting and recording disturbances

Specification:

The Datapaq Furnace Tracker Temperature Uniformity Survey (TUS) System from Fluke Process Instruments features the TP6 data logger, choice of thermal barrier (TB45 or TB46), thermocouples and our intuitive Temperature Uniformity Survey (TUS) Insight™ Software package to perform accurate in-process product thermal profiling while verifying conformity to all required specifications, including the AMS2750 standard.

BZ-7226

SIGNAL RECORDING APPB&K Importers Distributors,Dealers of BRUEL&KJAER suppliers are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi,Thirupattur

A signal recording app for Types 2250, 2250-L and 2270 sound level meter, enabling applications to record the input signal as an attachment to the measurement project.

Signal recording can be configured to run for the duration of the measurement, or it can be manually controlled or triggered to begin when a pre-set level is exceeded.

Pre- and post-recording buffers can be utilised if the recording is manually controlled, meaning you can hit the manual event button after the event and still capture it. Four different recording qualities are provided select the most suitable quality for your application and measurement duration.

USE SCENARIOS

• Identification and documentation of sound sources
• Re-analysis of signals on PC

After the measurement is complete, recordings can be imported into Measurement Partner Suite for further analysis. 24-bit recording is recommended for re-analysis during post-processing.

During playback, a volume control makes it easy to hear the smallest sounds and comfortably listen to loud bangs. When used with logging software, sound recordings are attached to the profile, making it easy to identify the cause of high levels.

Recordings attached to reports facilitate complaint handling, allowing all interested parties to acoustically experience what the measurement figures express.

CAPABILITIES

• 24- or 16-bit recording during all or parts of a measurement
• Playback on sound level meters Type 2250-S, Type 2270-S and Type 2250 Light and on a PC
• Recorded signal A-, C- or Z-weighted
• 8, 16, 24 or 48 kHz sampling frequency
• Optional, automatic gain control (16 bit only)
• Useful for both sound and vibration measurements

BZ-5829

DIGITAL AUDIO INTERFACE SOFTWARE B&K Importers Distributors,Dealers ofBRUEL&KJAER suppliers are tirupur,thiruvannamalai,Nilgiris,Villupuram,Virudunagar,Erode,Madurai,Thanjavur,Tiruchirappalli,Kanchipuram,Dharmapuri,Salem,Cuddalore

Software for connecting audio devices such as headphones, speakers or microphones to a PC via a high-quality sound card that handles analogue input and output

This PULSE software interface enables you to set up and test audio devices on a PC via a high-quality sound card. It does this by working together with our USB Audio Interface hardware. You simply plug the device under test (DUT) into the hardware box, which connects to your PC via a USB connection. In this way, it allows analogue input into PULSE software, and transforms the digital output your PC into analogue signals.

USE SCENARIOS

• Audio engineers researching, measuring and documenting acoustical designs during development and pre-qualification
• Benchmarking the acoustical performance of electroacoustic devices such as loudspeakers and headphones 
• Evaluating acoustical accuracy of headsets, microphones, and loudspeakers
• Sample testing of electroacoustic transducers during production, such as tolerance checking of loudspeaker drivers, for quality assurance

IN USE

A dedicated calibration procedure allows accurate compensation for the gain (or attenuation) presented by the high-quality sound card. Calibration uses a built-in generator to output a sinusoidal signal. During testing, the two level meters provide ‘analogue’ displays of the input and output, with small digital readouts in dBm.

CAPABILITIES

•  Analogue input and output using a high-quality sound card USB Audio Interface ZE-0948
• Monitors digital input and output level
• Calibration of input and output paths

REQUIREMENTS

This software requires that you use Brüel & Kjær’s ZE-0948 USB Audio Interface.

 VibXpert 3 Balancer/Vibration Analyzer - 2, 4 & 6 Channel:

The mobile solution for machinery health monitoring The VibXpert 3 Balancer/Vibration Analyzer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalanced faults.

 

With the VibXpert 3 Balancer/Vibration Analyzer, users can:

• Increase the reliability of their machinery by reducing excessive machine vibration levels. 
• Improve safety by reducing potential equipment hazards. Improve uptime by promptly identifying and correcting unbalance.
• Help meet industry standards and regulatory compliance requirements
• Improve the energy efficiency of rotating machinery, providing cost savings
• Maximize the efficiency, quality, and accuracy of field-balancing jobs

 

The result is extended peak operating asset performance, more effective resource use, and increased business value from operations.

Application:

Vibration analysis and In Situ Dynamic Balancing

MINIATURE CCLD ACCELEROMETER, INCLUDING CABLE BKSV.COM Importers Distributors,Dealers ofBRUEL&KJAER suppliers are tirupur,thiruvannamalai,Nilgiris,Villupuram,Virudunagar,Erode,Madurai,Thanjavur,Tiruchirappalli,Kanchipuram,Dharmapuri,Salem,Cuddalore A miniature piezoelectric CCLD accelerometer with isulated base, designed for measurements on lightweight structures where relatively high-level, high-frequency vibrations are encountered. 

Type 4394 is a piezoelectric DeltaShear, Unigain accelerometer with side connectors. It features an M3 connection and can be mounted on the test object with an M3 threaded stud, and has a ceramic isolated base.

CHARACTERISTICS

This miniature accelerometer may be treated as a voltage source. The sensitivity is expressed in terms of voltage per unit acceleration (mV/ms-2)

The sensitivity given in the calibration chart is measured at 159.2 Hz. For a 95% confidence level, the accuracy of the factory calibrated unit is +/- 0.7%.

USE SCENARIOS

• Shock and vibration measurement and analysis
• Vibration monitoring
• Modal and structural analysis
• Vibration test control
• Production and quality control

The DeltaShear design involves three piezoelectric elements and three masses in a triangular configuration around a central triangular post.

A clamping ring pre-stresses these elements to give a higher degree of linearity. The signal is collected between the housing and the clamping ring and amplified in the built-in CCLD preamplifier.

*CCLD: Constant Current Line Drive - also known as DeltaTron (IEPE compatible)

TYPE 4394 ACCELEROMETER INCLUDES

• Carrying box
• Calibration chart
• Cable: M3 (M) to 10 - 32 UNF (M), 1,2 m, 250° C / 248° F
• Three steel stud with flange, M3/M3, 3.5 mm (YS-8321)

·         Freq. range

·         1 – 25000 Hz

·         Temperature

·         -50 – 125 ℃

·         Weight

·         2.9 gram

·         Sensitivity

·         1 mV/ms^-2

·         Residual Noise Level in Spec Freq Range (rms) ±

·         2500 µg

·         

CCLD LASER TACHO PROBE B&K Importers Distributors,Dealers ofBRUEL&KJAER suppliers are Ariyalur,NagapattinamTirunelveli,Vellore,Sivagangai,Ramanathapuram,Karur,Thiruvarur,Krishnagiri,Theni,Perambalur,Dindigul,Pudukkottai,Tiruvallur

CCLD Laser Tacho Probe designed for contact-free speed measurements on rotating or reciprocating machine parts.

Type 2981 produces a voltage pulse for each rotation of a shaft or cycle of a machine part, enabling this CCLD Laser Tacho Probe to accurately measure speed (RPM) in a range of applications.

USE SCENARIOS

• Non-contact measurement of rotational speed
• Synchronisation between rotating or reciprocating machine elements and measurement instruments
• Low-speed measurements to 0 RPM* for wind turbine and ship propulsion applications
• High-speed measurements up to 300000 RPM for supercharger measurements
• Small size for measurements in tight locations

The Laser Tacho Probe is used with retroreflective tape (like the included QS-0056). This has the advantage that it can be located any distance from 1.5 to at least 70 cm (0.6 to 27'') from the test object, providing increased measurement flexibility, while safely separating the probe from contact with moving parts or otherwise hazardous environment.

TRIAXIAL CCLD SEAT ACCELEROMETER, 100 MV/G B&K Importers Distributors,Dealers ofBRUEL&KJAER suppliers are tirupur,thiruvannamalai,Nilgiris,Villupuram,Virudunagar,Erode,Madurai,Thanjavur,Tiruchirappalli,Kanchipuram,Dharmapuri,Salem,Cuddalore

Triaxial CCLD Seat Accelerometer with TEDS, designed for field measurement of human whole-body vibration as well as test and measurement of passenger and work vehicles. Supplied with a 3 M integral cable.

Accelerometer Type 4515-B is specially designed for the measurement of whole-body vibration. It consists of a triaxial accelerometer housed in a semi-rigid nitrile rubber disc and complies with ISO 7096, ISO 2631 and ISO 10326–1.

The accelerometer can be placed under a seated person, on a vibrating surface with a suitable weight on top, or strapped onto the body. It detects vibration in directions along the body, back-to-front, and side-to-side.

USE SCENARIOS

• Field measurement of human whole-body vibration
• Test and measurement of passenger and work vehicles

HUMS PIEZOELECTRIC ACCELEROMETER B&K Importers Distributors,Dealers ofBRUEL&KJAER suppliers are tirupur,thiruvannamalai,Nilgiris,Villupuram,Virudunagar,Erode,Madurai,Thanjavur,Tiruchirappalli,Kanchipuram,Dharmapuri,Salem,Cuddalore

Piezoelectric Accelerometer Type 4523 is specifically designed for Health Usage Monitoring of gearboxes on helicopters. 

All processes and materials comply with MIL-P-11268. The transducer has been designed to be reliable despite mechancial and enviornmental influences.

USE SCENARIOS

• Flight-test applications
• Measurement in harsh environments
• Health Usage Monitoring Systems (HUMS)
• Gearboxes

Features

• 11-mm large, two-colour LED display
• Choose from four different pressure units
• Fast response time of 2.5 ms
• Repeatability of ± 0.2% of F.S.

The Datapaq® SolarPaq system has been designed specifically to monitor the temperature of the glass substrate as it passes through the vacuum coating process.

The low height logger and thermal barrier can be located directly in the glass carrier. The barrier is only 35 mm (1.37 in) high and 105 mm (4.15 in) wide so it can be located in a small pocket within the carrier. The system then passes through the entire process measuring the glass temperature profile as it develops. When the system exits the datalogger can be retrieved from the thermal barrier and the profile information downloaded and analyzed. The system has been specifically designed to withstand the harsh environments within the plasma chambers and can be used repeatedly for both process set-up and regular monitoring. The external surfaces of the thermal barrier are coated with a high temperature ceramic coating that ensures the surface will not darken with use and hence guarantees continued consistent thermal performance.

The Datapaq Rotational Furnace Tracker Systems from Fluke Process Instruments features the Datapaq TP6 data logger, a rotational evaporative barrier, thermocouples and our intuitive Insight™ Software to create a complete solution.

This system is designed to be fitted to the end of test logs or inside pipes to travel through your process measuring data from the product and can be used in applications up to 1000°C (1832°F).