Instruhub

Digital network cable toner and probe traces and locates cables on active network.

IntelliTone digital toning technology:

• Ends network cable location confusion, decisively rejects noise and false signals
• Network cable tracer locates cables on active networks, even when terminated at a switch
• Isolates cable and wiring within a bundle, despite cable bleed
• Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in one step
• Signal strength indicator LEDs so you can help identify one cable that is bundled with other cables
• Probe has built-in pair tester to identify open, shorted and crossed pairs

SmartTone® analog toning technology:

• Isolates individual wire pairs precisely by changing tone when shorted
• Effectively traces and locates voice, audio, and video cabling

Get advanced vision for tracing and locating network cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Our new IntelliTone Pro 200 LAN Toner and Probe Kits finds the cables others can't.

The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner tracer and probeto offer digital and analog signaling all in one network toner and probe. That means it’s equipped with the most powerful cable tracing and location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

GENERAL SPECS

Operating temperature

32 °F to 104 °F (0 °C to 40 °C)

Storage temperature

-4 °F to +140°F (-20 °C to °C)

Operating relative humidity (% RH without condensation)

95 % (50 °F to 95 °F; 10 oC to 35 °C)
75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)

Vibration

Random, 2 g, 5 Hz-500 Hz

Shock

1 m drop test

Safety

EN 61010-1, Category: None

Altitude

3000 m

EMC

EN 61326-1, FCC Part 15 B

Battery type and life

9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical

Applications

Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.

PROBE SPECS

Dimensions

8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)

Display

(8) LED indicators, Sync LED indicator

Audio

IntelliTone: Microprocessor controlled audio files
Analog: Detected toner signal

Control

Thumbwheel switch, volume control wheel

Tone detection

Detects IntelliTone™ digital signal for Locate, Isolate, and CableMap
Detects analog SmartTone signal (500-1200Hz) and other analog toners.

Toner interface

Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling.

Auto power down

Turns off automatically after 1 hour of inactivity