Instruhub

Product Highlights

The technician’s tool for installing and troubleshooting Ethernet devices.

MicroScanner PoE Capabilities:

• Quickly determine if a problem is caused by a bad or unconnected cable, insufficient power, or a Powered Device (PD).
• Ethernet Alliance Certified to IEEE-802.3™ PoE standards for reliable multivendor interoperability
• Information for the Network Engineer to investigate potential switch configuration or malfunctions.
• PoE  Switch Verification – Determine if a switch port can provide enough power by reporting PoE class (0-8).
• Powered Pairs – Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++)
• Active Switch Detection - Determine if a cable is connected to a switch port and port speed up to 10G
• Cable Testing – Identify any shorted, open or crossed wires at both ends, length of each pair, and send tones to find cables.
• Validate and troubleshoot your Industrial Ethernet copper cabling
• PoE Injector verification - Display injector voltage level

Specifications MicroScanner² and MicroScanner PoE Specifications

MicroScanner² and MicroScanner PoE Specifications

Specifications apply at 23 °C (73 °F), unless otherwise noted.

Environmental Specifications

Environmental Specifications

Operating temperature

32 °F to 113 °F (0 °C to 45 °C)

Storage temperature

-4 °F to +140 °F (-20 °C to +60 °C)

Operating relative humidity (% RH without condensation)

90 % (50 °F to 95 °F 10 °C to 35 °C)
75 % (95 °F to 113 °F 35 °C to 45 °C)

Shock and Vibration

Random, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached

Safety

IEC 61010-1 3rd Edition

Altitude

4,000 m; Storage: 12,000 m

EMC

IEC 61326-1

General Specifications

General Specifications

Test connectors

Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner²: F-connector for coaxial cable.

Power

Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD

Dimensions and weight (with batteries installed and wiremap adapter attached)

3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner²: 10.6 oz (300 g) MicroScanner PoE: 10.6 oz (300 g)

Display

Monochrome LCD with backlight

Test Modes

Test Modes

Cable test

Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.

Tone

Generates Intellitone™ and normal analog toning signals

PoE

MicroScanner²: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices MicroScanner PoE: Solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices