Instruhub

Product Description:

The testo 606-2 moister meter equips you for moisture measurement in different types of wood and building materials. Apart from measuring moisture in the same way as the testo 606-1 moisture meter, the testo 606-2 also measures the relative humidity and air temperature and calculate the dew point and wet bulb temperature.
This means that you can now also measure the relative humidity in the surrounding storage area in addition to the moisture content of the wood you have stored. Armed with such valuable information, you can now easily determine whether the storage conditions are ideal or need to be adjusted.

Characteristic curves for precise moisture measurements in wood and building materials:
The moisture meter testo 606-2 measures the moisture content of wood and building materials via the two sensing electrodes which are pushed firmly into the material. The characteristic curves of the different materials allow the moisture content to be displayed directly as a weight percentage based on the dry mass (dry weight). The following characteristic curves are stored in the testo 606-2 moisture meter:
- For precise moisture measurements in beech, spruce, larch, oak, pine, maple
- For detecting moisture and wet places in building materials like cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar and bricks

- compact, practical, professional, easy to use

Technical Data:

 

Please see the additional accuracy information for humidity in the instruction manual.

• Data Hold
• Max/Min
• Red, Orange, Green Tricolor Back Light
• Auto Power Off (APO 5 Min)

Power : AAA 1.5 V X 3

Standard Acessories : Manual, Soft Carry Case

Dimension : 138 (H) X 56(W) X 25(D) mm

SPECIFICATION:

• Measuring Range: 0~100%
• Resolution: 1%
• Accuracy: ±4%
• Detection Depth: 20~40mm
• Battery: 9V
• Dimension: 185x55x35mm
• Weight: 193g

FEATURES: 

• Suitable for Wood, Gypsum and Cement.
• Maximum and Minimum Hold Mode.
• Alarm Function
• Low battery indication
• Automatic Power Off.

Moisture Oven:

The Preiser Model 100 Moisture Oven is designed to determine the moisture content of coal as per ASTM Standard D3173. It consists of a specially designed low-temperature oven coupled with a microprocessor-based temperature control system for drying samples up to 115ºC.

Application:

Sample Drying and Moisture Determination

Rapid inspection of thread
Speed and torque are adjustable
Thread gages with DLC coating ,excellent wear resistance

TM-X5000 Series telecentric measurement systems provide fast and accurate measurement by capturing the silhouette of a target. The dual telecentric optical systems provide reliable results inline by delivering focused images over a large depth of field. This design, in combination with the low-distortion lenses and proprietary algorithms, enable accurate measurements anywhere in the field of view, eliminating the need for precise target placement, external lighting, or even on-site calibration. The user-friendly system can be configured in 3 simple steps and includes over 100 tools for measurement and inspection, including: GD&T, master comparison, and defect distance detection.

Features:-

• SUITABLE FOR WOOD, CEMENT, SMOOTH, HARD GYPSUM, MIXED MORTAR BRICK, ETC  
• MEASURE MOISTURE, TEMPERATURE  & RELATIVE HUMIDITY 
• TEMPERATURE TYPE , AMBIENT  DEW POINT, WET BULB.
• MAXIMUM & MINIMUM MODES 
• AUTOMATIC POWER OFF

Elcometer 7000 Digital Moisture Meters:

The Elcometer 7000 range offers accurate and easy to use moisture measurement.

 

Types of Moisture Meters

1. Pin-type moisture meters
2. Pinless, contact-type moisture meters

For Concrete, plaster, brick, wood, the moisture content of the substrate should be measured, as the presence of moisture within a material will result in poor adhesion, premature coating failure and poor appearance. It is not sufficient to simply ensure that the surface is dry as often the surface of the substrate is the driest point – due to evaporation. It is important to establish the moisture content within the substrate itself.

Application: 

Concrete inspection

Technical specifications

The Cross Cut Adhesion Test Kit CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The round cutting knife of the Cross Cut Adhesion Test Kit CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the Cross Cut Adhesion Test Kit (CC1000) ensures equal pressure on the cutting knife.