Instruhub

General Specification

Instrument setup recall

Last used on power-up

Environmental

Operating temperature -10°C to +45°C
Storage temperature (without batteries) -20°C to +60°C

Altitude

2,000 m

Ingress protection

IP-40

Power requirements

6.0 V DC

Battery life

>35 hours, typical usage

Batteries required

(4) Standard AA cells

Dimensions (H x W x D)

7.9 x 4.3 x 2.3 in (20 x 11 x 5.8 cm)

Weight

03539 kg (1 lb 3 oz)

Connectors/ports pressure

Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe

Electrical and Temperature Measurement 1-Year

Function

Range

Resolution

Accuracy

mA measure

0 to 24 mA

0.001 mA

±0.015% of rdg
±0.002mA

Temperature Effect

No effect on accuracy on all functions from 15°C to 35°C

Add ±0.002% F.S./°C for temps outside of 15°C to 35°C

Available Pressure Engineering Units

psi, bar, mbar, kPa, kgcm2, cmH₂O @ 4°C, cmH₂O @ 20°C, mH₂O @ 4°C, mH₂O @ 20°C, inH₂O @ 4°C, inH₂O @ 20°C, inH₂O @ 60°F, mmHg @ 0°C, inHg @ 0°C, ftH₂O @ 4°C, ftH₂O @ 20°C, ftH₂O @ 60°F

Available Pressure Engineering Units

ATEX

Ex ia IIB T3 Gb (Ta= -10… +45 °C)

KEMA 10 ATEX 0168X

IECEx

Ex ia IIB T3 Gb (Ta= -10…+45 °C)

II 2 G IECEx CSA 10.0013X

Pressure Measurement Accuracy

Fluke 718Ex 30G

Range

-830 mbar to 2 bar (internal sensor)
Over pressure: 3x FS

Resolution

0.0001 bar

Accuracy

0.05% FS

Functions

Zero, Min, Max, Hold, Damp

Fluke 718Ex 100G

Range

-830 mbar to 2 bar (internal sensor)
Over pressure: 2x FS

Resolution

0.001 bar

Accuracy

0.05% FS

Functions

Zero, Min, Max, Hold, Damp

Fluke 718Ex 300G

Range

-830 mbar to 20 bar (internal sensor)
Over pressure: 375 psi, 25 bar

Resolution

0.0001 bar

Accuracy

0.05% FS

Functions

Zero, Min, Max, Hold, Damp

Fluke 718Ex series

Range

Via pressure module connector
29 pressure modules, 2.5 mbar to 700 bar
Over pressure per pressure module specs

Resolution

Per pressure module specs

Accuracy

To 0.025% of full span, per pressure module specs

Functions

Zero, Min, Max, Hold, Damp

Source pressure, built in pump range

-820 mbar to full scale

Technical Data

Measure accuracy

Range

0-24 mA

Resolution

0.001 mA

Accuracy

0.02% rdg ±2 counts

Display

LCD, 5 digit pressure and current simultaneous

Environmental Specifications

Operating temperature

-10°C to 55°C

Storage temperature

-40°C to 60°C

Humidity (without condensation)

95% (10°C to 30°C)

Calibrator Model 

Range

1 Year Specification

P5510-2700G-1

-12 to 300 psi (-80 kPa to 2 MPa)

Pressure:
±0.06 psi (±0.4 kPa)
Vacuum:
±0.15 psi (±1 kPa)

P5510-2700G-3

-12 to 300 psi (-80 kPa to 2 MPa)

Pressure:
±0.06 psi (±0.4 kPa)
Vacuum:
±0.15 psi (±1 kPa)

-12 to 100 psi (-80 kPa to 700 kPa)

Pressure:
±0.02 psi (±0.14 kPa)
Vacuum:
±0.05 psi (±0.35 kPa)

-15 to 15 psi (-100 kPa to 100 kPa)

Pressure:
±0.003 psi (±0.02 kPa)
Vacuum:
±0.0075 psi (±0.05 kPa)

P5513-2700G-1

0 to 3 000 psi (0 to 20 MPa)

Pressure:
±0.6 psi (±0.004 MPa)

P5513-2700G-3

0 to 3 000 psi (0 to 20 MPa)

Pressure:
±0.6 psi (±0.004 MPa)

-12 to 1 000 psi (-80 Kpa to 7 MPa)

Pressure:
±0.2 psi (±0.0014 MPa)
Vacuum:
±0.5 psi (±3.5 kPa)

-12 to 1000 psi (-80 kPa to 7 MPa)

Pressure:
±0.02 psi (±0.14 kPa)
Vacuum:
±0.05 psi (±0.35 kPa)

Specifications for P5510-2700G

Pressure Range

0 to 300 psi (20 bar)

Test Port Adapters

(2 sets) 1/8, 1/4, 3/8 and 1/2 NPT or BSP

Instrument Size
(W x D x H)

9.5x 13 x 7 in
(240 x 330 x 180 mm)

Instrument Weight

7.5 lb (3.5 kg)

Vacuum Range

0 to 24 inHg (800 mbar)

Accuracy

Accuracy¹

±0.015% of reading (±0.008% optional)

1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.

Mass and PCU Materials of Construction

Standard weight material

Series 3 non-magnetic austenitic stainless steel

Weight density

7.8 g/cm³

Optional fractional weights

Solution heat treated aluminum

Weight density

2.7 g/cm³

Models P3011, P3012, P3013, P3022, P3023, P3025 (V)

Piston material

Ceramic

Cylinder material

Martensitic steel

Coefficient of expansion

11 ppm/°C

Models P3014, P3015, P3025 (P) P3031, P3032 (P & V)

Piston material

Tungsten carbide

Cylinder material

Martensitic steel

Coefficient of expansion

16.5 ppm/°C

Model P3016

Piston material

Tungsten carbide

Cylinder Material

Tungsten carbide

Coefficient of Expansion

11 ppm/°C

General

Test port adaptors

1/8, 1/4, 3/8 and ½ NPT or BSP

Instrument weight

24 lbs

Instrument size (W x D x H)

17.5 x 12 x 8.5

Mass set weight (typical)

65 lbs

Minimum Standard Weight Increments

P3012, P3022 Pressure

1 inH₂O, (5 mbar)

P3013, P3023 Pressure

2 inH₂O, (10 mbar)

Pressure Ranges

Oil operated

Ranges to 20,000 psi (1400 bar)

Accuracy

Accuracy¹

±0.015% of reading (±0.008% optional)

1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.

Materials of Construction

Standard weight material

Series 3 non-magnetic austenitic stainless steel

Weight density

7.8 g/cm³

Optional fractional weights

Solution heat treated aluminum

Weight density

2.7 g/cm³

Piston material

Tungsten carbide with nickel binder
Density- 15.0 g/cm³

Cylinder material

Hardened martensitic steel
Tungsten carbide (water above 500 psi, 35 bar)

Thermal coefficients of expansion

Oil piston/cylinder 16.5 ppm/°C
Water (above 500 psi, 35 bar) 11 ppm/°C

General

Test port adaptors

1/8, 1/4, 3/8 and ½ NPT or BSP

Instrument weight

36 lbs (16 kg)

Instrument size (W x D x H)

17.5 x 12 x 8.5

Mass set weight (typical)

80 lbs (36 kg)

Reservoir volume

150 cc

Screw press displacement

5.5 cc

Pump displacement

4.7 cc per stroke

O-ring seal materials

Buna N as standard, Viton and EPDM available

Weight Increments

Minimum standard weight increments

Up to 500 psi (35 bar): 1 psi (0.1 bar)
500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)
5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar)
Model P3112: 1 psi (0.1 bar)

Optional fractional weights

Up to 500 psi (35 bar): 0.1 psi (0.01 bar)
500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)
5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar)

Pressure Ranges

Distilled water operated

Ranges to 10,000 psi (700 bar)

Accuracy

Accuracy¹

±0.015% of reading (±0.008% optional)

Materials of Construction

Standard weight material

Series 3 non-magnetic austenitic stainless steel

Weight density

7.8 g/cm³

Optional fractional weights

Solution heat treated aluminum

Weight density

2.7 g/cm³

Piston material

Tungsten carbide with nickel binder
Density- 15.0 g/cm³

Cylinder material

Hardened martensitic steel
Tungsten carbide (water above 500 psi, 35 bar)

Thermal coefficients of expansion

Oil piston/cylinder 16.5 ppm/°C
Water (above 500 psi, 35 bar) 11 ppm/°C

General

Test port adaptors

1/8, 1/4, 3/8 and 1/2
NPT or BSP

Instrument weight

36 lbs (16 kg)

Instrument size (W x D x H)

17.5 x 12 x 8.5 in (440 x 300 x 215 mm)

Mass set weight (typical)

80 lbs (36 kg)

Reservoir volume

150 cc

Screw press displacement

5.5 cc

Pump displacement

4.7 cc per stroke

O-ring seal materials

Buna N as standard, Viton and EPDM available

Weight Increments

Minimum standard weight increments

Up to 500 psi (35 bar): 1 psi (0.1 bar)
500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)
5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar)
Model P3112: 1 psi (0.1 bar)

Optional fractional weights

Up to 500 psi (35 bar): 0.1 psi (0.01 bar)
500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)
5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar)

Operating Fluids

Operating fluids

Distilled or deionized water

Specifications

Pressure range

0 to 300 psi (20 bar)

Vacuum range

0 to 24 inHg (800 mbar)

Instrument size (W x D x H)

9.5 x 13 x 7 in (240 x 330 x 180 mm)

Instrument weight

7.5 lb (3.5kg)

Test port adapters

2 sets 1/8, 1/4, 3/8, and 1/2 NPT or BSP