Instruhub

Chennai, Tamil Nadu

GST No.-33AGUPL8664P2Z9

Process Calibrator

Providing you the best range of cc-05 multi functional calibrator, fluke 718 pressure calibrator, fluke 754 documenting process calibrator-hart, fluke 725 multifunction process calibrator and fluke 725ex series process calibrator with effective & timely delivery.

CC-05 Multi Functional Calibrator

Get Best Quote

Request Callback

₹ 22000 / Piece Get Latest Price

Product Brochure

Accuracy	0.02%
Model Name/Number	CC-05
Display Type	Digital
Usage/Application	Industrial
Type	Rechargeable Battery
Power Source	3.7V

Minimum order quantity: 1 Piece

Accuracy ± 0.02%
Power : 3.7V Rechargeable Battery

Signal	Range	Precision	Resolution	Impedance
Current (mA)	0~24mA	± (0.02%+0.003)	0.001mA	100Ω
Voltage (V)	0~24V	± (0.02%+0.003)	0.001V	500K
Passive (XMT)	0~24mA	± (0.02%+0.003)	0.001mA	100Ω
24V loop	0~24mA	± (0.1%+0.005)	0.00mA	100Ω
FRQ (Hz)	0~9999Hz	± 2%	5digit	1MK
mV	-10~100mV	± (0.03%+0.003)	0.01mV	2K
TC (TC-S	0~1760ºC	± (0.2%+1)	1ºC	2K
TC (TC-B)	0~1810ºC	± (0.5%+1)	1ºC	2K
TC (TC-E)	0~990ºC	± (0.2%+1)	1ºC	2K
TC (TC-K)	0~1320ºC	± (0.2%+1)	1ºC	2K
TC (TC-R)	0~1760ºC	± (0.3%+1)	1ºC	2K
TC (TC-J)	0~1190ºC	± (0.3%+1)	1ºC	2K
TC (TC-T)	0~390ºC	± (0.2%+1)	1ºC	2K
TC (TC-N)	0~1290ºC	± (0.2%+1)	1ºC	2K
TC (WRe3/25)	0~2320ºC	± (0.2%+1)	1ºC	2K
TC (WRe3/26)	0~2320ºC	± (0.2%+1)	1ºC	2K
RES (ohm)	0~390Ω	± (0.2%+1)	0.1Ω	/
Pt100	-200~650ºC	± (0.5%+1)	0.1ºC	/
Cu50	-20~150ºC	± (0.5%+1)	0.1ºC	/

Yes! I am interested

Fluke 718 Pressure Calibrator

Get Best Quote

Request Callback

₹ 30000 / Piece Get Latest Price

Product Brochure

Model Name/Number	Fluke 718 Pressure Calibrator
Display Type	lcd
Usage/Application	Industrial
Type	process tools
Maximum voltage	30 volts
Operating temperature	-10 DegreeC to 55 DegreeC
Size	216 x 94 x 66 mm
Weight	992 g
Power, battery life	9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718

Minimum order quantity: 1 Piece

Key features:

Pressure Source and mA Measurement to calibrate pressure devices
Built-in pump for sourcing pressure to 300 PSI
Easy-to-clean, field-serviceable, integrated pressure pump
Built-in switch test for calibrating pressure switches
Extend pressure capabilities by using Fluke 750P pressure modules

Specifications:

Technical Specifications
Fluke 718 Series
Measure pressure	(Internal sensor)
Accuracy	0.025% full scale
Functions	Zero, min/max, hold, damp
Dry air, non-corrosives only
Fluke 718 1G
Range	-1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
Resolution	0.0001 psi, 0.001 mbar, 0.0001 kPa
Over pressure	5x Full Scale
Functions	Zero, Min, Max, Hold, Damp



General Specifications
Maximum voltage	30 volts (non-operating)
Temperature	-40°C to 60°C
Operating temperature	-10°C to 55°C
Relative humidity	95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C)
Operating altitude	3,000 M max
Shock	1 M drop test
Vibration	Random, 2 g, 5 Hz – 500 Hz
Safety	CSA C22.2 No. 1010.1: 1992
EMC	EN50082-1: 1992 and EN55022: 1994 Class B
Size	216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in)
Weight	992 g (35 oz)
Power, battery life	9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery life	4 to 20 hours typical, depending on functions used
Warranty	Three years (one year on pressure pump in Fluke 718)
Display	LCD, 5 digit pressure and current simultaneous

Yes! I am interested

Fluke 754 Documenting Process Calibrator-HART

Get Best Quote

Request Callback

₹ 38000 / Piece Get Latest Price

Product Brochure

Model Name/Number	Fluke 754 Documenting Process Calibrator-HART
Brand	Fluke
Type	process tools
Usage/Application	process calibrator
Weight	1.2 kg
Size	136 x 245 x 63 mm
Operating temperature	-10 DegreeC to +50 DegreeC
Operating altitude	3000 m above mean sea level (9842 ft)
Batteries	Internal Battery Pack Li-ion: 7.2V,4400mAh, 30 Wh

Minimum order quantity: 1 Piece

Key features:

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Technical Data
Data log functions	Measure functions	Voltage, current, resistance, frequency, temperature, pressure
	Reading rate	1, 2, 5, 10, 20, 30, or 60 readings/minute
	Maximum record length	8000 readings (7980 for 30 or 60 readings/minute)
	Ramp functions	Source functions	Voltage, current, resistance, frequency, temperature
		Rate	4 steps/second
		Trip detect	Continuity or voltage (continuity detection not available when sourcing current)
Loop power function	Voltage	Selectable, 26 V
	Accuracy	10%, 18 V minimum at 22 mA
	Maximum current	25 mA, short circuit protected
	Maximum input voltage	50 V DC
Step functions	Source functions	Voltage, current, resistance, frequency, temperature
	Manual step	Selectable step, change with arrow buttons
	Autostep	Fully programmable for function, start delay, stepvalue, time per step, repeat
Environmental Specifications
Operating temperature	-10°C to +50°C
Storage temperature	-20°C to +60°C
Dust/water resistance	Meets IP52, IEC 529
Operating altitude	3000 m above mean sea level (9842 ft)
Safety Specifications
Agency approvals	CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993
Mechanical and General Specifications
Size	136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in)
Weight	1.2 kg (2.7 lb)

Yes! I am interested

Fluke 725 Multifunction Process Calibrator

Get Best Quote

Request Callback

₹ 30000 / Piece Get Latest Price

Product Brochure

Model Name/Number	Fluke 725 Multifunction Process Calibrator
Display Type	Digital
Type	process tools
Operating temperature	-10 DegreeC to +55 DegreeC
Operating altitude	3000 m
Size	130 x 236 x 61 mm
Weight	0.65 kg
Batteries	4 AA alkaline batteries

Minimum order quantity: 1 Piece

Fluke 725 Multifunction Process Calibrator Key features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Specifications:

Measurement Accuracy
Voltage DC	30.000 V		0.02% + 2 counts (upper display)
	30.000 V		0.02% + 2 counts (lower display)
	100.00 mV		0.02% + 2 counts
	-10.00 mV to 75.00 mV		0.025% + 1 count (via TC connector)
Current DC	24.000 mA		0.02% + 2 counts
Resistance	0.0 to 400.0 Ω		0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire)
	401 to 1500 Ω		0.5 Ω (4-wire), 1 Ω (2- and 3-wire)
	1500 to 3200 Ω		1 Ω (4-wire), 1.5 Ω (2- and 3-wire)
Frequency	2.0 to 1000.0 CPM		0.05% + 1 count
	1.0 to 1100.0 Hz		0.05% + 1 count
	1.00 to 10.00 kHz		0.05% + 1 count
	Sensitivity		1 V peak-to-peak-minimum
Environmental Specifications
Operating temperature		-10°C to +55°C
Storage temperature		-20°C to 71°C
Operating altitude		3000 m
Safety Specifications
Agency approvals		EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992
Mechanical and General Specifications
Size		130 x 236 x 61 mm
Weight		0.65 kg
Batteries		4 AA alkaline batteries
Battery replacement		Separate battery compartment, accessable without breaking calibration seal
Side port connections		Pressure module connector, also used for remote real-time programming

Yes! I am interested

Fluke 725Ex Series Process Calibrator

Get Best Quote

Request Callback

₹ 30000 / Piece Get Latest Price

Product Brochure

Model Name/Number	Fluke 725Ex Series Process Calibrator
Type	process tools
Brand	Fluke
Weight	0.85 kg
Size	130 x 236 x 61 mm
I Deal In	New Only
Batteries	4 AA alkaline batteries

Minimum order quantity: 1 Piece

Key features:

Intrinsically safe multifunction process calibrator
Meets I.S. Class I, Division 1 Groups B-D, 171°C compliance standards
Measures volts DC, mA, RTDs, thermocouples, frequency, and ohms
Sources or simulates volts DC, mA, RTDs, thermocouples, frequency and ohms

Specifications:

Measurement Accuracy
Voltage DC	30.000 V	0.02% + 2 counts (upper display)
	10.000 V	0.02% + 2 counts (lower display)
	90.00 mV	0.02% + 2 counts
	-10.00 mV to 75.00 mV	0.025% + 1 count (via TC connector)
Current DC	24.000 mA	0.02% + 2 counts
Resistance	0.0 to 400.0 Ω	0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire)
	401 to 1500 Ω	0.5 Ω (4-wire), 1 Ω (2- and 3-wire)
	1500 to 3200 Ω	1 Ω (4-wire), 1.5 Ω (2- and 3-wire)
Frequency	2.0 to 1000.0 CPM	0.05% + 1 count
	1.0 to 1100.0 Hz	0.05% + 1 count
	1.00 to 10.00 kHz	0.05% + 1 count
	Sensitivity	1 V peak-to-peak-minimum
Pressure	Accuracy from 0.025% of range using any of 8 intrinsic safe pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure.
Source Accuracy
Voltage DC	100.00 mV	0.02% + 2 counts
	10.000 V	0.02% + 2 counts
	-10.00 mV to 75.00 mV	0.025% + 1 count (via TC connector)
Current DC	24.000 mA (source)	0.02% + 2 counts
	24.000 mA (simulate)	0.02% + 2 counts
Resistance	15.0 to 400.0 Ω	0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1 Ω (exc. current 0.5 to 2 mA)