Instruhub

BZ-5828

VOIP PHONE TEST SOFTWARE INTERFACE B&K Importers Distributors,Dealers of BRUEL&KJAER suppliers are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi,Thirupattur

Software for simulating a VoIP network phone and handling analogue input and output via a high-quality sound card, for speech performance evaluation.

This interface software establishes an audio connection to a VoIP (voice over Internet protocol) phone. By simulating the phone’s VoIP network, it allows you to test the phone’s acoustical performance during a call using PULSE test software. The interface works by establishing a call between itself and the phone. Then it reassembles the packetized data in the network into a continuous signal stream. This is presented to the test system in a usable and calibrated analogue format, using a high-quality sound card.

USE SCENARIOS

• Verification of acoustic design of IP phone systems that use a LAN (local area network) or the Internet during R&D in the research lab
• Evaluation and refinement of speech processing for VoIP phones, such as echo cancellers, voice activity detection and multiband compression
• Objective and subjective evaluation of phone components such as noise suppressors, microphone input filters and receiver output filters
• Calibrating the audio interface used with the VoIP terminal
• Quality assurance and sample testing of VoIP terminals from the production line

IN USE

The interface – or network simulator – allows you to set up relevant VoIP terminal parameters, before a dedicated calibration procedure allows accurate compensation for the gain (or attenuation) presented by the sound card. Calibration uses a built-in generator to output a sinusoidal signal. During testing, the two level meters provide analogue displays of the input and output, with small digital readouts in dBm. 

We recommend using Brüel & Kjær’s USB Audio Interface ZE-0948 as the sound card.

CAPABILITIES

• Implements SIP (session initiation protocol) and RTP (real-time transport protocol) for transfer of audio 
• Stable delay that is known, and free from jitter or dropouts
• Codec encodes and decodes the audio
• Acts as a telephone exchange for VoIP terminals
• Monitors digital input and digital output level

What You Get:

Match Textile offers a modular approach with the implementation of feature packages that suites customer’s specific needs. A point system rates the value of each individual feature. The program can be configured for 5,10,15,20,25 and 30 points. Only package of 5 points increment can be purchased.
Datacolor Match Textile in defined product level includes Datacolor Tools, a color quality control software License.

 

Technical Specifications:
Datacolor Match Textile is offered at different functionality levels to satisfy individual customer requirements. The basic level serves all general color matching needs and comes bundled with Datacolor Tools, a leading color QC software.


Requirements:

 

TYPE 8405-C | BK CONNECT

CPB ANALYSIS: CONSTANT PERCENTAGE BANDWIDTH B&K Importers Distributors,Dealers ofBRUEL&KJAER suppliers are tirupur,thiruvannamalai,Nilgiris,Villupuram,Virudunagar,Erode,Madurai,Thanjavur,Tiruchirappalli,Kanchipuram,Dharmapuri,Salem,Cuddalore

CPB analysis by BK Connect® for processing recorded data, including 1/n-octave and an overall level analyzers that meet IEC, DIN and ANSI standards.

With CPB Analysis by BK Connect data can be acquired from just one and up to hundreds of channels connected via data acquisition hardware to a PC, which records the signals. 

The software analyses the time data as it is replayed. It can perform multiple types of parallel analysis on the same data, such as vibration data at a different bandwidth to acoustic data. 1/n-octave analysis using 1/1, 1/3, 1/6, 1/12 and 1/24 octaves is often preferable to fast Fourier transform (FFT) analysis when analyzing noise.

USE SCENARIOS

• Analysis of recorded sound and vibration time data
• Vehicle noise, vibration and harshness (NVH) investigations, such as benchmarking
• Acoustic measurements for calculating equivalent sound level (L_eq) spectra on household consumer items such as washing machines 

The CPB Analysis software displays time data in an intuitive interface where users can efficiently get an overview of the data. To find relevant recordings, you can search for signals in the file name, such as ‘Drivers ear’.

By playing back audio and viewing the complete time history, you can make an intelligent selection of signal groups and time ranges for analysis. Features like synchronized cursors help make selections.

CAPABILITIES 

• Simultaneous calculation of overall level, both weighted and unweighted
• Exponential or linear averaging
• Spectrum and level vs time
• Exponential averaging includes slow and fast modes, covers tau range from 1/2048 s to 512 s
• Overall weighted or unweighted level (A, B, C, D or G) weighting
• Level vs time via frequency band extraction
• Fulfills the requirements of the standards DIN 45651 and ANSI S1.11–2004

The CPB Analysis software has an overall level analyzer that performs a broadband analysis equivalent to sound level meters, fulfilling relevant requirements of IEC 651, IEC 61672 and IEC 60804 for a class 1 instrument.

CHARACTERISTICS

• Graphical, drag-and-drop analysis process chain
  All BK Connect analyses use a graphical process-chain concept for setting up the post-recording analysis process.
  
  This includes individual elements for filtering, analysis, display and storage of results. each is individually configurable. Process chains can be exported to a file and emailed to allow others to repeat a defined, standardized process.
• Automated processing
  To maximize productivity, BK Connect enables batch processing of sequenced or parallel analysis of multiple sets of imported data.
  
  Time data can also be automatically imported from a network drive, and you can even setup  automatic reporting.

ENHANCED ANALYSIS CAPABILITIES WITH BK CONNECT 

• Order Analysis Type 8405-E
  1/n-octave spectrum vs RPM

BK CONNECT REQUIREMENTS

• Time Data Recorder Type 8400

Data Processing Type 8403

Benefits of Retail Paint Software:

• Lab quality matching engine provides superior color matching results. 30% higher first shot matching than competitive POS products.
• Easy-to-learn, easy-to-use interface enables search by color or product and all-in-one mode, saving steps to dispense.
• Customizable user interface allows you to add or remove features to suit your workflow, intuitive navigation and custom addition of manufacturer or hardware store logo.
• Flexible formula management uses any unit of measurement – shots, ounces, quarts, gallons, or liters – including automatic conversion from volume to weight.
• Re-dispense formulas instantly by searching customer files for any color, between any time period to quickly re-dispense and satisfy repeat customers.
• Manage your dispenser(s) efficiently all with one single computer

What You Get:

To adapt to different paint store settings and regional needs, Datacolor Paint is offered in three levels:

• Datacolor Paint EFB (Electronic Formula Book)
  Our entry-level solution for reliable electronic formula book management offers fast colorimetric search and formula retrieval, customer formula storage and retrieval, manual formula storage, color coordination and communication with the most common automatic dispensers and label printers.
• Datacolor Paint CCM (Color Card Matching)
  Includes all the features of the Electronic Formula Book level PLUS color matching for competitors’ collections and crossover colors. Color Card Matching requires both formulation and color card databases.
• Datacolor Paint Pro
  Our full package that includes all the features on Electronic Formula Book and Color Card Matching PLUS custom match and color correction capabilities.

Requirements:

Printer Port Parallel or USB Parallel or USB

Facility Net Monitoring Software Non-Pharmaceuticals Applications:

Facility Net Software provides a comprehensive environmental monitoring solution with real-time and historical data display for all Particle Measuring Systems particle counters, molecular contamination monitors and various third-party products.

Flexible data display, retrieval and export options coupled with system integration methods enable FacilityNet Software to be used as a standalone monitoring solution or as a sub-component in a larger system of environmental monitoring and building automation products. FacilityNet Software scales easily to support installations, including anywhere from a single device up to 250+ sample points on a single real-time station computer. Multiple real-time stations can be networked together into a larger system and viewed from multiple network stations, giving users a simple path for system expansion or to fit complex needs.

FacilityNet Software allows you to make configurations from your desk, so you can keep track of data, predict failure, and be notified of an alarm.

Application:

• Facility monitoring system for clean areas

FacilityPro Cleanroom Software for Pharmaceuticals:

FacilityPro® Cleanroom Software by Particle Measuring Systems provides the interface, data management, and reporting for an environmental monitoring system. FacilityPro’s ability to manage viable, nonviable, and environmental data through a common system improves the efficiency of production operations and quality investigations.

With the FacilityPro industrial automation architecture, the data processing is performed by the Processor while the data management, display, and storage are performed by the software. This design approach increases system reliability and data integrity.

The software platform offers a number of intelligent features including data mapping, alarming, reporting, and recipe-driven sampling. Both also offer client software for remote access and viewing of data.

SCADA NG is built on the GE® Proficy® iFIX® SCADA NG platform and Historian database and provides several additional advanced features.

Application:

• Facility monitoring system for clean areas

Empower Lab Management System (LMS) Integrated solution to elevate your workflows

Automating your laboratory workflow from initial sample creation to final archival is vital to achieving data integrity and to supporting day-to-day laboratory productivity. Empower LMS delivers a uniquely integrated experience, combining the industry-leading benefits of Empower Chromatography Data System (CDS) with the added workflow management capabilities of NuGenesis Lab Management System (LMS), including the Scientific Data Management System (SDMS).

From sample submission to data archival, manage your data all from a single, simple dashboard for an integrated approach to your product lifecycle management so you can reduce transcription errors, increase efficiency, and maximize data durability.

Overview

§  Increase efficiency and maximize data by managing all your data in a single, simple dashboard that offers an integrated approach to your product lifecycle management

§  Automate your laboratory workflow from initial sample creation through to the final archival

§  Achieve elevated control and productivity in your laboratory operations with simple electronic workflows

§  Manage Empower instruments and see if the instruments are fit for use before beginning your Sample Set

§  Automatically secure, archive, and easily access your data whenever you need it throughout the full retention period 

MassMetaSite Software A powerful tool for drug metabolite identification from LC-MS data

Many DMPK laboratories use LC-HRMS platforms to generate metabolic clearance data, since quantitative and qualitative outcomes can be determined from the same datasets. How quickly metabolic fate can be characterized depends on whether software can find drug-related material in complex matrix backgrounds, in a high-throughput mode, on compounds that may have different chemotypes.

MassMetaSite is an established approach for the automatic identification of metabolites for small molecules and peptides using LC-MS, UV, fluorescence, and radio-chromatogram data, reducing analysis time from several hours to only a few minutes per compound. The software can assign chemical structures to putative metabolites based on the MS and MS/MS fragmentation pattern of the parent drug and the metabolite. MassMetaSite has been developed to analyze the native data formats from MassLynx and waters_connect, as well as data from multiple other vendors to enhance your research impact.

Overview

§  Improve your metabolite analysis efficiency through automated peak detection using state-of-the-art algorithms

§  Advance your investigations with automated structure elucidation using product ion data

§  Rationalize metabolites across a range of chemical modalities including small molecules, proteolysis targeting chimeras (or PROTACs), peptides, and oligonucleotides

§  Start processing your data after just a few hours of training using a comprehensive and easy-to-learn toolset

§  Process both small and large sample batches of drug metabolism data for added versatility

Recommended Use: For bringing forward compounds into development using an established approach for the automatic identification of metabolites for small molecules and peptides.

Streamline data processing with complete compatibility Add even greater value to the native capabilities of waters_connect software solutions to process drug metabolism data through a streamlined end-to-end workflow that is fully compatible with Waters data, including MS^E, SONAR, HDMS^E, and calculation of CCS values. As a vendor-neutral solution, your lab can utilize software processing capabilities across multiple MS instruments

Anton Paar- Software for particle analysis:Kalliope

·        Particle analysis software for the Litesizer DLS Series, PSA Series, and Litesizer DIA 500

·        Start your particle measurements in just three clicks

·        One-page workflow user interface

·        Live monitoring of measurement results, analysis function, customizable reporting, and multiple exporting capabilities

The ingeniously simple particle analysis software Kalliope is one of the highlights of the Anton Paar particle analyzers. It drives the Litesizer DLS Series, PSA Series, and Litesizer DIA 500. The user interface is based on a one-page workflow, where input parameters, live signal, live image, and results are all displayed on a single page. You can set up measurement series in a few seconds and create the analyses and reports you need at the touch of a button.

Key features:

1.      Particle analysis at the touch of a button

Kalliope can optimize your DLS and ELS experiment: It automatically adjusts the attenuation, finds the most suitable focus position, and selects the best detection angle for DLS. All you need to do is choose your solvent, click “Start,” and watch the results appear. 
For laser diffraction the measurements are just as easy: Choose between dry or liquid mode with only one click. A simple workflow takes you through the rest of the measurement. 
Kalliope for DIA offers 17 size, shape, and image quality parameters with the most powerful particle selection and filtering features on the market. Find even a single particle among millions.

2.      One-page workflow

Input parameters, a live view of the measurement, and the results – all on one page. With its one-page workflow, Kalliope keeps track of your input parameters, and detects a live signal and image, even if you’re looking at your results. The recalculation button permits use of different algorithms, changing sample parameters, and filtering after measurement. 

3.      Live particle monitoring

Series measurements show how particle size and zeta potential change with time, temperature, pH, or concentration. Results are clearly displayed in real time on a single graph in different colors so that trends can be identified, while all important values and parameters are logically tabulated under the graph.

4.      Analysis, reporting, and exporting

You can analyze your data and produce a report at the touch of a button. Measurements are graphed together in different colors and tabulated directly below for easy comparison. Use the automatic report template or customize it. You can also compare results from different experiments, or easily export the data for further analysis.

5.      Traceable and auditable records

Kalliope for the Litesizer DLS series and PSA provides customizable reports that can be generated in a few seconds and passed on for signing, either electronically or by hand. In addition, a pharma option with data security functions, user management, and audit trails is included, making Kalliope compliant with the US FDA’s 21 CFR Part 11. A comprehensive pharma qualification package (PQP) is also available.

Capable of high-definition imaging, the IM-8000 Series Image Dimension Measurement System has triple the detection performance of conventional systems without sacrificing its simple operation; just place the part on the stage and press one button. With a 20-megapixel CMOS sensor and a new algorithm for stable edge detection, high-accuracy measurement on up to 300 features within seconds is now possible. A newly developed, optional automated rotary fixture allows for 360' multi-surface measurement on diverse part sizes and shapes. Achieve accurate and repeatable measurements instantly with its 'place and press' operation; this ensures consistent results regardless of operator experience. The fast, accurate, and easy-to-use interface of this product solve various measurement-related problems.

During the metallographic examination of the portable on-site metallographic examination system, it is not necessary to move the workpiece, cut and sample, and directly grind, polish, etch and observe the workpiece to ensure the integrity of the workpiece. It is an effective tool for non-destructive testing of metallographic structure. Grinding, polishing and etching

The on-site metallographic inspection system is applicable to the metallographic inspection of large and unbreakable products, such as safety inspection, quality supervision, metallographic inspection and failure analysis in petrochemical industry, railway shipbuilding, power plant, power station, equipment installation, large abrasive tools and other industries. Especially important for quality control, detection and fault analysis of power plants, chemical plants, offshore platforms and other applications

Product features:

1. The system is complete and consists of one or more of the following five components:

1) M-20D portable metallographic microscope

2) MAP-1 speed regulating grinding and polishing machine for site use (optional)

3) EP-01 portable electrolytic polishing machine (optional)

4) MIAS3000 professional metallographic analysis software (optional)

5) AC paper - reproduction of microscopic images (optional)

2. The system completes the whole process of on-site sample grinding, polishing, etching (mechanical or electrolytic), microscopic observation, microscopic digital photography and replica

3. Each sub component of the system is packaged separately for easy carrying

4. Easy to use without special training;

5. It has high efficiency and can quickly obtain high-quality microstructural photos.

ITW PROBANDS

ATLANTIC MILLS

Premium Food Service Towel

FEATURES

• Color coded to prevent cross contamination
• Simple to implement
• Absorbent
• 1-10 day useful life
• Reusable/disposable
• Rinse out stains easily
• Dry quickly
• Contribute to only .1% to nation's landfills
• Economical

APPLICATIONS

Develop new products and match your opaque, translucent, and transparent colors accurately and efficiently using one of today’s most advanced color matching algorithms.

 Colibri^® ColorMatch features and benefits include:

• A user-friendly, intuitive, and seamless interface
• Highly efficient matching of opaque, translucent, and transparent colors
• Recipe calculation on different substrates including metals
• Variation of resin type as required, using only one colorant library
• Use of leftover materials, reducing waste and costs
• Customization of functionality and feature settings to match your application and workflow
• An integrated expert system, allowing pigment pre-selection according to application requirements
• Possibility to calculate thousands of recipes containing your specified colorants using pre-defined application or product templates
• Automatic update of the database with every change in color strength, allowing for color fluctuations in base materials
• View of your color recipes, catalogues and standard collections in the CIELAB L a b or L C h color space. You can even add multiple color sets and view overlapping color gamuts. The 3D color gamut viewer displays true color hulls and color points
• Compatibility with a very broad range of spectrophotometers

Colibri ColorMatch allows matching on a wide range of substrates and materials, including connection with Colibri ColorTint for dispensing perfect recipes.

Produce and monitor production of your brand and color standards within agreed tolerances. Assess color production and make any corrections required before releasing the product. Track job status online and communicate with your partners, wherever they are.

 Colibri ColorQuality features and benefits include:

• Improved communication between management, production and partners
• Increased cooperation between supply chain participants
• Speedy assessment of the conformity of production to a standard under different illuminant conditions
• Visual display of limits on screen, allowing you to check the suitability of your choices
• Availability of the most common pass / fail criteria, including delta E (CIE Lab), CIE 94, CMC, FMC-2 and Hunter Lab
• The chart mode, enabling you to see at a glance where and how deviations affect the color
• The template function, which allows you to optimize the workflow of final users by generating customized templates
• Selection of color strength methods, helping you to determine the quality and consistency of production batches
• Compatibility with multi-angle measurement devices, allowing you to control the quality of your effect shades
• The 3D chart, which allows you to monitor and view the quality of production
• The 3 D Gamut viewer to view your final production samples in their true color space before approving and releasing products.
• Assessment of jobs using different methods and a wide range of criteria

Colibri ColorQuality communicates seamlessly with ColorMatch and ColorTint enabling you to modify your recipe during the production process.