Instruhub

Product Highlights

Patented jack termination tool allows you to terminate jacks 8 times faster.

• Cuts installation time - easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
• High quality, consistent terminations - no more compromised connections and wasted jacks
• Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
• Unique design easily accommodates close-to-wall installation
• Replaceable blade head for use with multiple jack types

Overview

JackRapid™ is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. JackRapid allows you to terminate jacks eight times faster than traditional impact tools - with accuracy that's unmatched. 

The patented jack termination tool seats and terminates all wires simultaneously. The built-in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.

Features

Replaceable blade heads

JackRapid blade heads are specific to certain jack types--check the list below to see if JackRapid supports the jacks you use, and if not, look for a new JackRapid version in the future!

The INSIZE 2237-5 Internal Thread Crest Diameter Measuring Instrument has the following specifications:

• Range: 2 3/8-5 1/2″/60.325-139.7mm
• Dial Indiactor Stroke: 5mm
• Dial Indicator Graduation: 0.001mm
• Accuracy: 0.02mm
• L: 260mm
• A1: 112mm
• A2: 91mm

Features:

• Measure the crest diameter of internal thread with nominal diameter larger than 2 3/8″ (60.325mm) and less than 20″ (508mm)
• Optional accessory: height standard and zero standard block

The INSIZE 2236-5 External Thread Crest Daimeter Measuring Instrument has the following specifications:

• Range: 2 3/8-5 1/2″/60.325-139.7mm
• Dial Indiactor Stroke: 5mm
• Dial Indicator Graduation: 0.001mm
• Accuracy: 0.02mm
• L: 260mm
• A1: 112mm
• A2: 91mm

Features:

• Measure the crest diameter of internal thread with nominal diameter larger than 2 3/8″ (60.325mm) and less than 20″ (508mm)
• Optional accessory: height standard and zero standard block

Gedore-Electronic Tester Capture Lite 0.25-10 Nm

Product description

• Electronic test device for intermediate testing & adjustment of right-hand torque wrenches/screwdrivers
• Ideal for checking fixed torque wrenches
• Plug & Work - Simple and quick checking of torque wrenches/screwdrivers within the production line
• Testing of right-hand torque wrenches in the range of 0.2 - 10 N·m
• Extreme precision - measurement accuracy +/- 1% for all readings (+/-1 digit) - meets even the highest industrial requirements.
• Changing the measurement modes and switching the unit with a simple one-button operation
• Has three measurement modes: Track (glide value display), First-Peak (break point detection) and Peak (peak value measurement)
• Switchable between N·m, lbf·ft and lbf·in
• The display value is automatically reset (Auto reset)
• Data transfer and power supply via USB interface
• Delivery with factory certificate
• 2xM12 screwing torque 47 N·m (size 8mm hexagon key)
• Free evaluation PC software for plausibility check optional

 

Dimensions and weights

• Total width [mm]: 120 mm
• Total height [mm]: 70 mm
• Total length [mm]: 135 mm
• Nominal width [mm]: 120 mm
• Nominal height [mm]: 70 mm
• Nominal length [mm]: 135 mm
• Net weight [kg]: 1.2 kg

 

scope of delivery

• Parts list (text): Plastic case, USB connection cable, adapter (external square to external hexagon), mounting screws, operating instructions, test certificate
• Content (number of pieces): 1

 

Technical characteristics

• Adapter: external square to external hexagon
• Drive socket, square [metric]: 6.3 mm
• Drive socket, square [inch]: 1/4"
• Resolution: 0.001
• Actuation direction: right
• Torque (max.) [lbf·ft]: 7.4 lbf·ft
• Torque (min.) [lbf·ft]: 0.19 lbf·ft
• Torque (max.) [lbf·in]: 88 lbf·in
• Torque (min.) [lbf·in]: 2.2 lbf·in
• Torque (max.) [Nm]: 10 Nm
• Torque (min.) [Nm]: 0.25 Nm
• Graphic display: No
• Scope of delivery: plastic case, USB connection cable, adapter (depending on model), mounting screws, operating instructions, test certificate
• Material: aluminum housing
• Torque measurement accuracy: ± 1 % tolerance for all readings
• Surface: blue anodized
• Compliance: compliant
• Interface: USB
• Overload protection: No

Product Highlights:

All the network tools you need (in one pouch) to cut, strip, clean and make connections.

• All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt
• D914™ and D814™ industry standard punchdown tools make for solid terminations
• Easy to use cable stripper quickly rings and slits many types of cable
• Use the Probe Pic to check for loose or damaged connections
• Cut and strip wire cleaner and faster with the Electricians’ D-Snips™ 
• Three networking tool kits combinations available for a multitude of applications

Overview

The most essential installation and termination tools for electrical and telecom technicians in our sleek form-fitting PVC Dur-A-Grip™ Tool Pouch – holds your tools securely inside, even upside down. Three network tool kits combinations to choose from to meet a multitude of network applications.

Features All the tools you need (in one pouch) to cut, strip, clean and make connections

IS60 Pro-Tool™ Kit
The professional tools you need to cut, strip, clean and connect wire and cable in datacom and telecom applications. All-in-one ergonomically designed pouch for convenient tool storage on belt to make your job easier. Includes: D914S™ Impact Tool, Electrician's D-Snips, Cable Stripper, Mini Maglite®, Sharpie® pen and an EverSharp™ 66/110 Cut Blade

IS50 Pro-Tool™ Kit
The IS50 Pro-Tool kit is comprised of the most essential tools for electrical and telecom technicians in a durable compact PVC pouch. The following items are included in this convenient kit: D914S™ Impact Tool, Electrician's D-Snips™, Cable Stripper, and an EverSharp™ 66/110 Cut Blade

IS40 Pro-Tool™ Kit
The IS40 Pro-Tool kit is comprised of the most essential tools for electrical and telecom technicians in a durable compact PVC pouch. The following items are included in this convenient kit: D814™ Impact Tool, Electrician's D-Snips™, Cable Stripper, EverSharp™ 66/110 Cut Blade, and the Probe Pic.

Models & Accessories

Kits

11292000 11291000 11293000

Accessories

11291400 11292400 11293400

Product Highlights

Cable strippers and Cutters include double slotted, plenum, round, coax and combo.

• Full line of cable and wire strippers
• Double-slotted stripper for 22/24 gauge wire insulation
• Round cable stripper for a variety of flexible round cable
• Coax cable strippers with two or three levels
• Combo stripper for multiple wire types and applications

 

Overview

Fluke Networks offers a variety of cable stripper and cutters for coaxial cables, UTP/STP telephone and data cables and other flexible cables.  Telephone installers use the double-slotted cable stripper for 22/24 AWG wire installation. Use our coax cable stripper to perform 2-level and 3-level stripping of RG58/59 coaxial cables.

Our cable stripper's adjustable blade depth to "score" without damaging shielding and conductors.  And, our combo stripper is a highly versatile tool that quickly cuts and rings Teflon, smoothly slits fiber, copper, electric and coaxial cables, and rings 25-100 pair cable without nicking the conductor.

 

Features Cable Stripper Choices

Double slotted
Designed for use with inside/outside JKT station wire, this 22/24 AWG wire insulation stripper with cutter is a standard hand tool carried by all telephone installers. Two slots side by side strip both IW jacket and individual conductors.

Cable Stripper
Adjustable cable cutter and cat 6 wire stripper for round cables, UTP/STP telephone and data cables, and other flexible cables. Fluke Networks’ electric wire stripper provides effortless, finger-loop cutting and stripping of flexible cables. It features easily adjustable blade depth to "score" without damaging shielding and conductors. Use it to easily cut and strip round cables, UTP/STP telephone and data cables plus other flexible cables.

Coax Stripper
Perform 2-level and 3-level stripping on RG58/RG59, 162/6, and Belden 1694A coaxial cables. This spring-loaded stripper also features a built-in Allen wrench for adjusting the blade to prevent damage to the cable.

Combo Stripper
This highly versatile tool quickly cuts and rings Teflon, smoothly slits fiber, copper and coaxial cables, and rings 25-100 pair cable without nicking the conductor. To further enhance its performance, the copper wire stripper can handle different diameter cables, even smaller than 3/16 inch without any complicated blade adjustments.

Models & Accessories

Models

11230002

Cable stripper (round cable)

11231255

Coax stripper, 2 & 3-level

44210013

Double slotted stripper with cutter, 22/24 gauge

44210015

Double slotted stripper with cutter, 24/26 gauge

11231257

Coax stripper, 2-level

44200013

Double slotted stripper 22/24 gauge

Hydraulic Nut Splitters GRIPHOLD Industrial Tools & Equipment

 

Importers Distributors,Dealers of Griphold Adustable Torque Wrenches suppliers are Ariyalur,NagapattinamTirunelveli,Vellore,Sivagangai,Ramanathapuram,Karur,Thiruvarur,Krishnagiri,Theni,Perambalur,Dindigul,Pudukkottai,Tiruvallur

Product Details:

Hydraulic Nut Splitters/ Breakers are Used for breaking the nuts which are worn-out or not able to loosen with any other tools.

Following are the Specifications of Hydraulic Nut Splitters/ Breakers (700 bar): 

§  Capacity 5 Tons to 90 Tons

§  Nut A/F sizes from 13 mm to 75 mm

§  Compact and ergonomic design, easy to use.

§  Unique angled head design.

§  Single-acting, spring return cylinder.

§  Heavy duty chisels can be reground.

§  Maximum allowable Hardness of Split 44 HRC.

§  Tool suitable for SAE grade 2 Nuts.

Following are the Specifications of Hydraulic Nut Splitters/ Breakers (1500 bar): 

§  Capacity 29 Tons to 199 Tons

§  Nut A/F sizes from 13 mm to 136 mm

§  Compact and ergonomic design, easy to use.

§  Unique angled head design.

§  No thread damage to bolts or studs.

§  Single-acting, spring return cylinder.

§  Chisels have been designed with three cutting edges for maximum life.

§  Maximum allowable hardness of split 44 HRC.

§  Tool suitable for SAE grade 2 Nuts.

§  Maximum tool operating pressure 1500 Bar.

Gedore-High torque electric screwdriver type LDE-28 with display

Product description

• 2-speed manual transmission
• Continuously adjustable torque
• incl. function LE.Nm
• Complete coverage of the torque range between 1st and 2nd gear
• Safety system
• Microprocessor Electronics
• LED indicates changeover for right-left rotation
• Braked 360° rotating drive unit

 

Dimensions and weights

• Total height [mm]: 495 mm
• Net weight [kg]: 7.3 kg

 

scope of delivery

• Parts list (text): Device including reaction arm (St) in cranked design with hold function, tool case and individual factory test certificate.
• Content (number of pieces): 1

 

Technical characteristics

• Square drive: 1"
• Square drive [inch]: 1"
• Torque (max.) [lbf·ft]: 2050 lbf·ft
• Torque (min.) [lbf·ft]: 260 lbf·ft
• Torque (max.) [Nm]: 2800 Nm
• Torque (min.) [Nm]: 350 Nm
• Compliance: Reg. No. 124c8ef4-419a-4bef-85ec-21ff8f8854b9
• Revolutions per minute: 6 ~rpm

Gedore-Base housing 4-100 Nm 1/2"

Product description

• Basic housing (without display and data transmission cable) of the electronic test device for certification/testing/adjustment of right- and left-handed torque wrenches
• Suitable for vertical & horizontal testing (according to DIN EN ISO 6789) of torque wrenches - traceable to national standards, with quality test certificate
• Certification/testing/adjustment of right- and left-handed torque wrenches in the range of 4 - 100 N·m
• Extreme precision - measurement accuracy +/- 1% for all readings (+/-1 digit) - meets even the highest industrial requirements.
• The power supply is provided via a power plug
• Factory certificate based on VDI 2646
• Optional: Calibration according to DKD-R 10-8 including calibration certificate with accreditation symbol (required for calibration of torque wrenches according to DIN EN ISO 6789-1/-2:2017)
• For fastening to a suitable base, we recommend hexagon or cylinder head screws for ETPG 15: 2x M6, ETPG 100 - 1000: 4x M8 and ETPG 3150: 4x M10, each with a strength class of at least 8.8 with suitable washers and nuts (ETPG 15 has an internal thread - no nuts required).

 

Dimensions and weights

• Total width [mm]: 159 mm
• Total height [mm]: 148 mm
• Total length [mm]: 245 mm
• Net weight [kg]: 9.2 kg

 

scope of delivery

• Content (number of pieces): 1

 

Technical characteristics

• Adapters: 1/4", 3/8"
• Drive socket, square [metric]: 12.5 mm
• Resolution: 0.01
• Torque (max.) [lbf·ft]: 74 lbf·ft
• Torque (min.) [lbf·ft]: 3 lbf·ft
• Torque (max.) [Nm]: 100 Nm
• Torque (min.) [Nm]: 4 Nm
• Graphic display: No
• Torque measurement accuracy: ± 1% tolerance of reading, ± 1 digit
• Compliance: compliant
• Interface: RS-232
• Overload protection: No

Gedore- Captive Pin 1" socket wrench

Product description

• For hard-to-reach screw locations
• Chrome-vanadium steel
• Compatible with torque wrenches type TBN 2 and TBN 10

 

Dimensions and weights

• Total length [mm]: 120 mm
• Net weight [kg]: 0.1 kg

 

scope of delivery

• Content (number of pieces): 1

 

Technical characteristics

• Head width 2 [mm]: 56.5 mm
• Head height 2 [mm]: 8.2 mm
• Material: Chrome-vanadium steel
• Surface: dip-coated
• Compliance: compliant
• Wrench size 1 [AF]: 1"
• Pitch [metric]: 51.0 mm

Ratcheting Spanners GRIPHOLD Heavy Duty Industrial Tool

 

 

Importers Distributors,Dealers of Griphold Adustable Torque Wrenches suppliers are Ariyalur,NagapattinamTirunelveli,Vellore,Sivagangai,Ramanathapuram,Karur,Thiruvarur,Krishnagiri,Theni,Perambalur,Dindigul,Pudukkottai,Tiruvallur

Product Details:

We offer the complete range of precision engineered Special Ratcheting Spanners, which are at par with international quality and safety norms. While, we offer especially designed Ratcheting Spanners for the gear case bolt of Electric Loco Engines, suitable for Bolt A/F Sizes 55 mm & 60 mm.

Heavy Duty Tool Kit GRIPHOLD

 

Product Details:

We offer Tool Kit for diverse industrial applications in sectors like heavy engineering, chemicals & fertilizers, oil & gas, mining, automobile, petrochemicals etc.

 

Salient Features of Tool Kit are:

 

§  Assured quality

§  Easy to maintain

§  Energy efficient

§  Higher operational efficiency

§  At par with global norms of operational safety

§  Reliable and durable

§  Specific storage for different tools

§   GRIPHOLD tool kits are designed for maintenance and servicing of heavy earth moving machinery, fertilizer plants, thermal/gas/hydel power plants, cement plants, chemical/petrochemical plants, gas & oil exploration and mining equipment and various other high torque applications.

§  GRIPHOLD tool sets also consist of sockets in 1/2" and 3/4" square drive in SAE as well as metric sizes, driving accessories in 1/2" and 3/4" square and click type adjustable torque wrenches up to a capacity of 250 ft.lbs.