Instruhub

Virosart HF Lab Module 1.7 cm² - Integrity Tested.

OVERVIEW:

Application:

• Virus clearance: Virosart HF targets the removal of both small non-enveloped viruses (20 nm) e.g. PPV, MVM and larger enveloped viruses (> 50 nm) e.g. MuLV from biopharmaceutical feed streams.
• Target molecule: The main application for Virosart® HF filters is the virus filtration of monoclonal antibodies (mAbs), antibody fragments (Fab) or small recombinant proteins (< 150 kD).
• Positioning: Virosart HF is used towards the end of the purification process of biopharmaceutical products for the virus filtration. At this stage, the purity of the biopharmaceutical product is at its highest and so fouling of the filter by contaminants (DNA, CHOP, aggregates & lipoproteins) will be low.

Product Benefits:

• Robust virus clearance: Virosart® HF retains ≥ 4 LRV of small non-enveloped viruses (e.g. PPV, MVM) and ≥ 6 LRV of large enveloped viruses (e.g. MuLV). This filter offers highest virus safety over the entire flow decay profile independently of operating pressure.
• Short processing times: Based on a unique modified PES membrane, Virosart® HF provides highest flow rates and excellent capacity.
• Smart process transfer: The hollow fiber format supplies highest consistency and scalability from lab to process scale.
• Cost efficiency: The high packing density of the elements combines extremely low hold up and flushing volumes with low footprint requirements.
• Ready to use: The sterile delivery secures ease of use as well as fast installation of the filter elements.
• Ease of use: Virosart HF are tested for integrity using a water-based diffusion test, e.g. based on the Sartocheck® technology of Sartorius Stedim Biotech

Specification:

·        Application

·        mAB Production

·        Recombinant Protein Production

Connections (Physical)

·        Connector Inlet

Luer Lock

·        Connector Outlet

Luer Lock

Dimensions

·        Filtration Area

1.7 cm²

General Specifications

·        Capsule/Cartridge Format

Down scale unit

·        Filter Format

Down Scale Units

Materials of Construction

·        Filter Material

Polyethersulfone (PES)

Physicochemical Information

·        Pore Size

20 nm (nominal)

Product Information

·        Brand

Virosart® HF

·        Pack Size

2

Sterility

·        Delivery Condition

Sterile - Gamma irradiated

Glass Solvent Filtration

No.: SLGSF03001, SLGSF05002
Branch: Single
Funnel Size: 300mL, 500mL
Funnel Valve: Glass
Support Screen: Pyrex glass
Screen Pore Size: 10μm
Connection: Ground Joint
Collection Bottle: 1000mL, 2000mL

Suppliers, dealers and importers of MarForm MMQ 400 In Ananthapur Chithoor, Cuddapah, Guntur, Srikakulam, East Godavari, .

300mL Glass Solvent Filtration

Hawach 300ml glass solvent filtration is used primarily in microbiological and analytical procedures that involve collecting a particulate (bacteria, precipitate, etc.) from a liquid suspension.

This sand core 300ml glass solvent filter vacuum filtration device is a highly versatile filtration product that can be used with filtration membranes and filter papers of different materials and pore sizes to meet various laboratory filtration needs.

Advantages of 300ml Glass Solvent Filtration

• 300 mL funnel
• Membrane diameter: 47, 50mm
• High-quality glass material, glass is smooth and transparent, no bubbles, wall thickness uniformity
• Good pressure can be used for high-temperature and high-pressure sterilization
• Small order acceptable

Features

• High quality extra hard glass
• Sparking and crystal-clear, even thickness
• International standard size, 300mL/1000mL
• Excellent fitting with the vacuum pump
• The whole set can be used for Sterilization at high temperatures and high pressure
• Suitable for any of our vacuum pump

Application

• Mainly used in filtration of HPLC mobile phase.
• To guarantee the cleaning of the mobile phase and avoid blockage of the HPLC liquid flow path and etc.

Operating process

Liquids poured into a funnel pass through a filter, which retains the particulate, and filtrate can be collected into a filter flask, directly or via a vacuum manifold.

Hawach 300ml glass solvent filter is made of high-quality extra hard glass, which is sparkling and crystal-clear and whose thickness is even, with the performance of withstanding voltage and very excellent leak-proof ability. The size follows international standard size, and especially it can be used for sterilization at high temperatures and high pressure.

 

Diafiltration for Rapid Buffer Exchange

Buffer exchange is a simple yet important technique in most macromolecule purification workflows. It can be used to remove unwanted substances, adjust sample conditions, or introduce components to a sample.

For example, efficient capture of a macromolecule in ion exchange or affinity chromatography is achieved under specific buffer conditions. Therefore, exchanging your sample into the optimal loading buffer prior to chromatography is usually recommended.

Common Applications for Buffer Exchange

• §Removal of salt and detergent 
• Adjustment of ionic strength and pH
• Removal of low-molecular weight contaminants
• Introduction of cofactors or inhibitors
• Addition of preservatives

There are three popular methods used for buffer exchange: dialysis, gel filtration and ultrafiltration (Table 1). Buffer exchange solutions from Sartorius use ultrafiltration as the method of choice, thanks to its flexibility, speed, and lower buffer consumption, when compared to other methods.

Sartolab® Multistation Filtration Units Stand

Importers Distributors,Dealers ofSARTORIUS suppliers are tirupur,thiruvannamalai,Nilgiris,Villupuram,Virudunagar,Erode,Madurai,Thanjavur,Tiruchirappalli,Kanchipuram,Dharmapuri,Salem,Cuddalore 

The Sartolab^® Multistation is specially designed for simultaneous, hands-free filtration of up to six samples.

Top Features of the Sartolab^® Multistation

• Simultaneous filtration of one to six samples with one vacuum source
• Hands-free filtration
• Time-saving, with no installation time for each filter unit before use

Popular Applications for the Sartolab^® Multistation

• Hands-free, parallel filtration of up to six samples

·         Save time and complete filtration with ease using the Sartolab^® Multistation, specially designed to hold one to six vacuum filtration units. Utilizing a single vacuum source allows for simultaneous filtration of up to six samples.

·         Streamlined, Hands-Free Filtration

·         Using the Multistation is easy and will allow you to complete filtration more quickly than standard, standalone filtration. The purchase of one system will allow the filtration of six samples in parallel and record time. Using Sartolab^® RF|BT units will allow for hands-free parallel clarification and sterile filtration of cell cultures in just a few seconds.

·         Easy Manipulation

·         The Sartolab^® Multistation was designed for efficient, easy filtration. Should the need arise to manipulate your samples, you can use the 360° Rotating Head, located on top of the system.

·         Numbered Brackets

·         The Sartolab^® Multistation is clearly marked and numbered. The numbered brackets allow you to easily keep track of your samples during filtration, ensuring accurate results and easy filtration of multiple samples at once.

·         Single Vacuum Source Connection

·         The Sartolab^® Multistation was designed to be used with a single vacuum connection. The Multistation is permanently connected to your vacuum source. The vacuum filtration units can be easily installed in the Multistation for quick, easy filtration of samples. You’ll save precious time by avoiding the need to devote extra effort to the installation of extra connectors and time-consuming stabilization.

·         Two Simple Clicks for Parallel Filtration

·         The Sartolab^® RF|BT vacuum filtration units were designed to fit perfectly in the brackets of the Multistation. Connect the unit to the device with one simple click, assuring perfect filter stability. With a second click, engage the vacuum automatically and begin filtering.

Sensor Transfer Sets

Sensor Assemblies consist of BioPAT^® Pressure or BioPAT^® Flow sensors. They are pre-assembled with tubing and connectors for immediate connection to single-use or hybrid stainless-steel systems. 

Sensor Transfer Set offer:  

• BioPAT^® Pressure sensors 
• BioPAT^® Flow sensors 
• Broad choice of tubes and connectors