Instruhub

• 3½ Digit Multimeter with Backlight
• 1,999 Count
• Non Contact Voltage (NCV)
• Auto Power Off (APO) under natural operation
• True RMS

• Diode Test NCV
• Transistor Testing Input impedance 10MΩ
• Continuity Buzzer Approx. <30+10 Sampling Rate 3 times per second
• Low Battery Display Approx. <7.5V AC Frequency Response 40-400Hz
• Auto Power OFF Approx. 30 min Power 9V (6F22) x 1

Standard Accessories: Test Lead, Manual

Dimension : 225(H) x 38(H) x 26(D)mm

• 3¾ Digit Multimeter with Backlight
• 3,999 Count
• COMS, TTL Logic Test
• Auto Power Off (APO) under natural operation
• True RMS

• Function Protection
• Diode and HFE test Input impedance 10MΩ
• Transistor testing Sampling Rate 3 times per second
• Continuity Buzzer Approx. <30+10 AC Frequency Response 40-400Hz
• Low Battery Display Lower 2.4V Power AAA 1.5V X 2
• Auto Power OFF Approx. 30 min

Standard Accessories: Test Lead, Manual, TP 04 Temperature Probe

Dimension : 170(H) x 86(W) x 35(D)mm

• 3½ DIGIT MANUAL MULTIMETER
• 1,999 COUNT
• AUTO POWER OFF UNDER NATURAL OPERATION
• TERMINAL SHUTTER INTERLOCK MECHANISM
• TRANSISTOR TESTING

POWER : 9V (6F22) X 1
Dimension : H191 x W82 x D36 mm
Weight : Approx. 310 Gms.
Accessories : Test leads, Fuse, Manual TP04 Thermocouple & Battery.

• 3¾ DIGIT MULTIMETER
• 3,999 COUNT
• AUTO POWER OFF
• DATA HOLD, MAX/MIN
• NCV
• TRUE RMS
• hFE TEST
• DUTY CYCLE
• AUTO RANGE

POWER : H185 x W93 x D35 mm
Dimension : H185 x W93 x D35 mm
Weight : Approx. 290 Gms.
Accessories : Test Leads, Sheath, TP01 Thermocouple, Manual

• 4½ DIGIT MULTIMETER
• 19,999 COUNT
• AUTO POWER OFF
• CONDUCTANCE
• hFE TEST
• DATA HOLD

POWER : 9V (6F22) x 1
Dimension : H185 x W93 x D35 mm
Weight : Approx. 290 Gms.
Accessories : Test Leads, Manual & Battery

• 3 6/7 DIGIT MULTIMETER
• 5,999 COUNT
• VSD & TRUE RMS
• DATA HOLD
• AUTO POWER OFF
• hFE TEST
• DUTY CYCLE
• ANALOG BAR
• MAX/MIN VALUE

POWER : 9V (6F22) x 1s
Dimension : H185 x W93 x D35 mm
Weight : Approx. 290 Gms.
Accessories : Test Lead, Manual,TP01 Temperature Probe & Battery.

• 4½ Digit True RMS with Backlight
• 19,999 Count
• Auto Power Off (APO)
• Data Hold

Diode Test : Overload Protection

hFE test : Function Protection

True RMS : Anti Shock Protect

Continuity Buzzer Approx : <30Ω+10Ω Input impedance 10MΩ

Low Battery Display Approx : <7.5V Sampling Rate 3 times per second

Auto Power OFF Approx. 30 min : AC Frequency Response 40-400Hz

Standard Accessories :Test Lead, Power Cord, Manual

Dimension :245(H) x 220(W) x 82(D)mm

• 3½ Digit Clamp Meter with Backlight Manual Range
• 1999 Count
• Fully Protected in all RANGE
• Jaw Open: 52mm
• Clamp Torch
• True RMS
• NCV

Diode Test

Continuity Test

Function Protection

Sampling Rate 2 or 3 times/sec

Input impedance 10MΩ

Standard Accessories : Soft Carrying Case, Manual, Test Lead

Dimension : 123(H) x 270(W) x 35(D)mm

POWER: AAA 1.5V X 2

• 3 ½ Digits (1999 Digits)
• Select either Watts per Square Meter (W/m2) or BTU
• Max/Min. Peak Hold functions
• Data Hold
• Compass Functions, Easy to know the direction.

Standard Accessories: Soft Carrying Case, Manual

Dimension: 130(H) x 95(W) x 30(D)mm

• 3½ Digit Manual Multimeter
• Count 2000
• Battery Test
• Max / Min Hold
• Data Hold
• Auto Power Off (APO)
• True RMS

• Diode Test
• Continuity
• Power AAA 1.5V x 2

Standard Accessories: Test Lead, Manual

Dimension: 151(H) x 75(W) x 45(D)mm

• 3½ Digit Manual Multimeter with Backlight
• 1,999 Count
• Data Hold
• True RMS
• NCV

• hFE Test
• Overload Protection
• Low Battery Indication
• CAT III 600V
• Power AAA 1.5V x 2

Standard Accessories: Manual, Test Lead

Dimension : 140(H) x 72(W) x 37(D)mm

• 4½ Digit Multimeter with Backlight
• 19,999 Count
• Meter is designed according to IEC 1010 standard
• Auto Power Off (APO) under natural operation

• Diode Test Anti Shock Protect
• hFE test Input impedance 10MΩ
• Continuity Buzzer Approx. <30Ω+10Ω Sampling Rate 3 times per second
• Low Battery Display Approx. <7.5V AC Frequency Response 40-400Hz
• Auto Power OFF Approx. 30 min. Power 9V (6F22) X 1
• Function Protection

Standard Accessories : Test Lead, Manual

Dimension : 175(H) x 83(W) x 31(D)mm

• Identify complex signal problems fast
• Supports accurate measurements on VFDs using a low-pass filter
• Captures intermittents as fast as 250 µS with Peak Capture

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.

• Easy-access door for fast battery changes without breaking the calibration seal
• Analog bar graph for fast changing or unstable signals
• Large digit display with bright, two-level backlight for easier reading in low light
• Touch Hold keeps readings on display even after removing probes 

Specifications: 

Voltage DC          Maximum voltage            1000 V

Accuracy              ±(0.05% + 1)

Maximum resolution       10 µV

Voltage AC          Maximum voltage            1000 V

Accuracy              ±(0.7% + 2) True RMS

AC bandwidth     20 kHz with low pass filter; 3 dB @ 1 kHz

Maximum resolution       0.1 mV

Current DC          Maximum amps 10 A (20 A for 30 seconds maximum)

Amps accuracy  ±(0.2% + 2)

Maximum resolution       0.01 µA

Current AC          Maximum amps 10 A (20 A for 30 seconds maximum)

Amps accuracy  ±(1.0% + 2) True RMS

Maximum resolution       0.1 µA

Resistance           Maximum resistance       50 MΩ

Accuracy              ±(0.2% + 1)

Maximum resolution       0.1 Ω

Capacitance        Maximum capacitance   9,999 µF

accuracy              ±(1% + 2)

Maximum resolution       0.01 nF

Frequency           Maximum frequency       200 kHz

Accuracy              ±(0.005% + 1)

Maximum resolution       0.01 Hz

Duty cycle           Maximum duty cycle      99.9%

Accuracy              ±(0.2% per kHz + 0.1%)

Maximum resolution       0.1%

Temperature measurement          –200.0 °C – 1090 °C

–328.0 °F – 1994.0 °F

excluding probe

80 BK temperature probe             –40.0 °C – 260 °C

–40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater

• 1000V AC/DC; 10A AC/DC (with test leads and current jacks); resistance to 50 MΩ; capacitance to 10,000 μF, frequency to 100 kHz; temperature from -40 ℃ to 400 ℃
• Robust, fast and accurate with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
• Backlit digital display, analog bar graph, and built-in temperature measurements with included thermocouple.

The Fluke 179 True-rms Digital Multimeter is the industry-standard troubleshooting tool for electrical and electronic systems. This incredibly versatile multimeter makes a perfect front-line troubleshooting tool with an input protection rating of CAT III 1000 V, CAT IV 600 V. The built-in temperature measurement with the included thermocouple, analog bar graph and backlit digital display make it easier to take the measurements you need.

Specifications:

Voltage DC          Accuracy1           ±(0.09% + 2)

Max. resolution  0.1 mV

Maximum            1000 V

Voltage AC          Accuracy1           ±(1.0% + 3)

Max. resolution  0.1 mV

Maximum            1000 V

Current DC          Accuracy1           ±(1.0% + 3)

Max. resolution  0.01 mA

Maximum            10 A

Current AC          Accuracy1           ±(1.5% + 3)

Max. resolution  0.01 mA

Maximum            10 A

Resistance           Accuracy1           ±(0.9% + 1)

Max. resolution  0.1 Ω

Maximum            50 MΩ

Capacitance        Accuracy1           ±(1.2% + 2)

Max. resolution  1 nF

Maximum            10,000 µF

Frequency           Accuracy1           ±(0.1% + 1)

Max. resolution  0.01 Hz

Maximum            100 kHz

Temperature       Accuracy1           ±(1.0% + 10)

Max. resolution  0.1°C

Range    -40°C / 400°C

1. Accuracies are best accuracies for each function

Environmental Specifications

Operating temperature   -10°C to +50°C

Storage temperature       -30°C to +60°C

Humidity (without condensation)               0% – 90% (0°C – 35°C)

0% – 70% (35°C – 50°C)

Safety Specifications

Size        43 x 90 x 185 mm

Weight  420 g

Battery life          Alkaline ~200 hours typical, without backlight

• Compact, true-rms digital multimeter for electricians
• Includes multimeter, 4mm silicone test leads, holster and manual
• Integrated non-contact voltage detection keeps you safe
• Prevent false readings from ghost voltage with selectable low-impedance mode

 It saves you time and enables you to move from job to job more quickly. With a quick turn of the dial you can get measurements for:

• Resistance
• Continuity
• Frequency
• Capacitance
• Min/Max/Average

• Compact True-rms digital multimeter for field service
• Includes: meter, holster, 4 mm PVC-Insulated test lead
• Easy one-handed operation of the meter
• Min/Max/Average to record signal fluctuations

The 115 digital multimeter offers the users one-handed operation and a backlit display. The large, easy-to-read digits offer a 6000-count resolution. The 115 provides Min/Max/Average with elapsed time to record signal fluctuations. It also measures:

• AC and DC voltage to 600V,
• AC and DC current to 10 A (20 A overload for 30-seconds max).

• IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
• Designed to withstand 3 meter drop (with holster)
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• MSHA approval

The standard for rugged

The Fluke 28 II digital multimeter defines the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The meter offers an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and has been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 28 II Rigged Digital Multimeter is built to work in the toughest environments.

Brand: FORENSICS DETECTORS
Model: FD-MULTIMETER

Features:

·         ⚛️ FUNCTIONS: True RMS, 6000 counts, AC/DC voltage, AC/DC current, resistance, capacitance, frequency/duty, diode test, continuity test, temperature, and battery tester.

·         📶 RANGE: Manual range is more accurate and stable than automatic range measurements. Intelligent socket LED indicators to ensure correct lead plug-in. Double insulation protection ensures the safety of testing. Safety compliance: CAT.III 1000V CAT.IV 600V, CE, RoHS certified.

·         ❇️ FEATURES: JUMBO digits, work LED, non-contact voltage measurement, live wire testing, durable case, stand, thermocouple, and batteries.

·         💪 STRONG: Shockproof, dust-proof, and explosion-proof. 

·         🕵️ TRUSTWORTHY: ** 1-year limited warranty ** 100% quality guaranteed **

Details: This multimeter is for the serious user. For those looking for a cheap weekend multimeter, don't bother. This is a professional multimeter with advanced top-shelf functions, such as true TRMS, 6000 counts, large digits, non-contact voltage measurements, large ranges of DC, AC voltages, and currents. Also at Forensics Detectors, Dr. Koz dislikes auto-ranging meters and believes they are annoying to use. Therefore, we have kept the tried and tested manual dial function. 

Included: Multimeter, 2 x AA batteries, test leads, thermocouple for temperature measurements, and an English Manual.

Specifications:
DC voltage: 600 mV / 6 V / 60 V / 600 V / 1000 V ± (0.5% + 3)
AC voltage: 6 V / 60 V / 600 V / 750 V ± (1% + 5)
DC current: 60 uA / 60 mA / 600 mA / 6A ± (0.8% + 3) 10A ± (1.2% + 3)
AC current: 60 mA / 600 mA ± (1% + 3) 10 A ± (1.5% + 3)
Resistance: 600 Ω / 6 kΩ / 60 kΩ / 600 kΩ / 6 MΩ / 60 MΩ ± (0.8% + 3) ± (5% + 5)
Capacitance: 10 nF / 100 nF / 1 μF / 10 μF / 100 μF / 1 mF / 10 mF / 100 mF ± (5% + 5)
Frequency: 10 Hz / 100 Hz / 1 kHz / 10 kHz / 100 kHz / 1 MHz / 10 MHz ± (1% + 3)
Temperature: -40 ~ 1000 ℃ / -40 ~ 1832 ℉ ± (1% + 3)
Power supply: 2 x AA batteries (included)
Safety level: EN61010-1, -2-030 EN61010-2-033, EN61326-1 CAT III 1000V, CATIV 600V
Display: Jumbo LED digits

Suppliers and importers of forensics detectors are Kanchipuram,Dharmapuri,Salem,Cuddalore,Ariyalur,Nagapattinam,Tirunelveli,Vellore,Sivagangai

MarSurf CM expert MAHR

Art. no. 6350002

High-performance laboratory and QA system

The MarSurf CM expert is a powerful confocal microscope for the three-dimensional measurement and analysis of surfaces – contactless, independent of material, and fast. 

Suppliers, dealers and importers of MarForm MMQ 400 In Ananthapur Chithoor, Cuddapah, Guntur, Srikakulam, East Godavari, .

PRODUCT INFORMATION

High-performance laboratory and QA system

The MarSurf CM expert is suitable for use in test laboratories and equipped for quality assurance in production environments due to its robust construction and insensitivity to environmental influences. 
With additional manual Z positioning, a large x and y travel range and the possibility of automation, it offers excellent ease of use. 

Typical measuring tasks

·         Roughness measurements as per
ISO 4287 & ISO 13565 / ISO 25178

·         Topography measurements (including volume, wear, tribology)

·         contour and form (2D, 3D)

·         pore, particle analysis

·         defect detection

·         ...

APPLICATIONS

Mechanical Engineering
To qualify and quantify roughness, geometry and wear volume

Electronics and semiconductors
Component inspection down to the sub-micrometer range for defect-free products

Medical Technology
Quality assurance of medical surfaces in production and laboratory

Material Science
Optimization of functional properties of new surfaces and products

Microsystems Technology
Measure complex surface geometries of smallest components with nanometer precision

SmarTest is an intelligent wireless sensor for non-destructive coating thickness measurement and relays sensor data via Bluetooth to your tablet, smart phone or to the coating thickness gauge MiniTest 745.

The radio sensor SmarTest is 16 mm / 0.63″ in diameter and 125 mm / 4.92″ in length somewhat like a thick ballpoint pen and weighs just 48 g / 1.7 oz.

This means that you can carry the SmarTest with you anywhere.

You can connect any SIDSP sensor to SmarTest and cover a wide range of coating thickness measurement tasks.

It is very simple to operate the SmarTest:

·         Start the SmarTest app on the mobile device

·         Switch on the wireless sensor and the Bluetooth connection is established automatically

·         Take measurements

The SmarTest app helps you through all steps with context-sensitive help texts in 4 languages currently.

There are two measuring modes available:

·         Single value mode
The measurement values are taken individually and displayed. This enables you to take coating thickness values of the object to be measured at multiple points and then to evaluate them statistically.

·         Continuous mode
After placing the sensor the measuring values are taken continuously and displayed. This mode is suited for calculation of layer thickness distribution on a restricted surface and to locate the thin and thick sections. The measuring values calculated on continuous mode can be saved in the statistics by briefly pressing the power button.

Sensor control and data transfer of the measuring values is done via Bluetooth 4.0 / Bluetooth Smart (low energy). The sensor and mobile device can be placed about 10 m away from each other, even farther under good transmission conditions.

The SmarTest app shows the current measuring values, the statistical evaluation and helps store control and calibration of the sensor.

There is an option of the metric (μm, mm) and imperial (mils) formats for display and processing of measuring values.

Storage and transfer / download of measuring values is done in the CSV format.

• 4 measurements in one instrument: Film thickness Fe/NFe, Air temperature, Relative humidity, Dew point
• SSPC specific mode for standardized measurement protocols and calibration routines

Features:

The byko-test film thickness gage includes dew point measurement, whereas the byko-test Lite is for dry-film thickness measurement only.

• Compact design for one hand operation
• Color display with 90° and 180° flip screen
• Automatic substrate recognition
• Strong wear resistant ruby probe tip
• Zero, single and two point calibrations
• Key lock for only taking readings
• Hi/Low tolerance settings for pass/fail warning
• Statistics mode with 1000 measurement memory
• Continous measurement mode
• Stability mode warns user when instrument is tilted preventing wrong readings

• Measuring Range Mils / µm

0 - 79 mil 0 - 2000 µm

• Measurement Method

Film Thickness Fe/NFe - Dew Point

• Full Scale Calibration Range Mils/ µm

-

• Certificate

yes

Thickness Measurement

• Substrate Fe

Steel or Iron

• Substrate NFe

Non-magnetic metals: aluminum, copper, brass, zinc, stainless steel

• Measuring Range

0 - 2000 µm

• Measuring Range

0 - 79 mil

• Accuracy

±2 µm + 3% of measured value

±0,08 mil + 3% of measured value

• Minimum Curvature

Convex 5 mm; Concave 30 mm

• Minimum Curvature

Convex 0.20 in; Concave 1.2 in

• Minimum substrate thickness

Fe: 0,5 mm; NFe: 0,05 mm

• Minimum substrate thickness

Fe: 0,019 in; NFe: 0,002 in

• Temperature Measuring Range

0 - 50 °C

• Temperature Measuring Range

32 - 122 °F

• Temperature Accuracy

±1.5 °C; ±2.7 °F

• Humidity Measuring Range

0 - 100 % RH

• Humidity Accuracy

20 - 70 %RH: ±4%

0-19 & 71-100 %RH: ±6%

General

• Memory

1000 readings

• Weight

0.16 kg

• Weight

0.35 lb

• Dimensions: L x W x H

11.5 x 6.7 x 4.4 cm

• Dimensions: L x W x H

4.53 x 2.65 x 1.75 in

Standards:

BS

3900-C5 5411-3 5411-11

ISO

2178 2360 2808 19840

ASTM

B499 D1186 D1400 D7091

DIN

50981 50984

• ANALOG MULTIMETER WITH MIRROR SCALE
• INBUILT BUZZER AND LED
• OΩ ADJUSTABLE WITH x 100 DIODE
• TRANSISTOR TEST
• hFE TEST
• DIODE

Dimension : H148 x W100 x D35 mm
Weight : Approx. 280 Gms.
Accessories : Test leads, User Manual & Battery.

• 3½ Digit Manual Multimeter with Backlight
• 1,999 Count
• Data Hold
• Transistor ＆ Diode Test
• Overload Protection
• Low Battery Indication
• CAT II 600V

Standard Accessories : Manual, Test Lead

Dimension : 69(H) x 138(W) x 31(D)mm

• °C/°F Function
• Super Large LCD display with baclight
• Reading the Air Velocity & Temperature same time
• Thermistor sensor for Temperature measurement, Fast Response time.

Power : 9V (6F22) x1

Standard Accessories : Anemo Probe, Carrying Case, Manual, Power Adaptor

Dimension : 210(H) X 75(W) X 50(D)mm

• 3½ Digits LCD
• 1,999 Counts
• Over Load : LCD display “OL”
• Battery Life : Approximate 100 hours

POWER : 9V (6F22) X 1

Standard Accessories : Soft Carrying Case, Manual

Dimension : 130(H) x 56(W) x 38(D)mm

• Altitude history & Graphical Display of the last 12 hour altitude readings.
• Total Altitude Gain & Loss
• Max./Min. Memory for Altimeter and Barometer Pressure
• Barometer Pressure History & Graphical Display
• Electronic barometer Weather Forecast (Sunny, Slightly Cloudy, Cloudy, Small Rain, Large Rain)
• Pressure Trend Indicators
• Perpetual Calendar with day of week
• 12/24 hour selectable
• Low Battery Indication

Standard Accessories: Handy Belt, Manual, Charging Cord

Dimension : 177(H) x 98(W) x 39(D)mm

• VOLT/mA Calibrator
• Accuracy ±0.05%

Standard Accessories : Soft Carrying Case, Battery Charger, Test Lead, Manual

Dimension : 195(L) x 95(W) x 45(H)mm

• Data Hold Auto
• Manual Range
• Max / Min / Avg Data Hold
• Relative Value Measurement
• 180 Degree Rotable Probe
• LED Type : Red / Blue / Green / Yellow / Purple
• Self Defined Light Source
• Self Defined Light Source Coefficient
• LCD Display With Bar-Graph
• Auto Power Off
• Low Battery Indication

• Data Hold
• Max/Min
• Back Light
• Fast / Slow weighting
• Auto Power Off (APO 10 Min)

Power : AAA 1.5 V X 3

Standard Accesories : Manual, Soft Carry Case

Dimension : 142 (H)X 58(W) X 28(D) mm

• DC Output: 0~1.3V 10mV/dB
• ‘A’,’C’ or ‘Flat’ weighing with Slow / Fast response
• 94dB in Full calibration at (1KHz)
• Optional RS-232 Communication (Advanced Software Program for all windows)
• Alarm Volume o/p: 30~130dB
• Alarm Volume o/p: LED Optional Relay output

• LP: Current sound pressure level
• Leq : Equivalent Continuous Asound pressure level (i.e. Arithmetically mean value in a period of time set)
• LN : Statistic analysis i.e. % of all measured values which is greater than or equal to the alarm value (Alarm set by user)

Standard Accessories: Hard Carrying Case, Wind Screen Ball, Manual

Optional Accessories: HTC Software with RS-232 USB Cable

Dimension: 236(H) x 63(W) x 26(D)mm

Memory : Max. Value (30 groups)

Power : AAA 1.5V x 4

Alarm : Electron

Product Overview:

DWL-680Pro digital level is embedded with the latest advanced organic LED - OLED technology allowing for the brightest display. It is also designed to the stringent specification of IP65 - water, shock, dust & freeze proof, and wide operating temperature range allowing for high performance and reliability in the toughest working environment.DWL-680Pro has all the features necessary to make it an indispensable levelling tool for the professional and industry specialist.

SPECIFICATION

BENEFIT

 FEATURES         

The INSIZE 2260-4 Digital Groove Width Measuring Instrument has the following specifications:

• Range: 0.55-1.4″/14-35.5mm
• Movable Point Stroke: 0.16″/4mm
• Resolution: 0.00005″/0.001mm
• Repeatability: 0.002mm

Features:

• Measure the groove width of flange ring groove
• Point height is adjustable

• Measuring range: 30~130dB

• Accuracy: ±2dB
• Resolution: 0.1 dB
• Sampling time: 0.5s for digital; 0.005s for analogue
• Response time: fast: 125ms; slow: 1s
• Frequency: 30Hz~8KHz
• Frequency weighting: A/C
• Microphone: electret condenser type
• Output: RS232, AC/DC
• Power supply: 6xAAA batteries
• Dimension: 265x80x69mm
• Weight: 317g

• Automatically select best range: 30-80dB, 40-90dB, 50- 100dB,60-110dB, 70-120dB,80-130dB
• Over range indicator
• Real time, average, maximum modes
• Memory 16000 measurement values
• AC signal output: 0.707 Vrms at FS, impedance approx. 600Ω
• DC signal output: 10mV/dB, impedance approx. 100Ω
• Automatic power off

HTC-YX-360 TRE-B

Features:

· ANALOG MULTIMETER WITH MIRROR SCALE

· INBUILT BUZZER AND LED

· OΩ ADJUSTABLE WITH x 100 DIODE

· TRANSISTOR TEST

· hFE TEST

· DIODE

Dimension : H148 x W100 x D35 mm
Weight : Approx. 280 Gms.
Accessories : Test leads, User Manual & Battery.

Specifications:

DC VOLTAGE

DC CURRENT

AC VOLTAGE

RESISTANCE

Features:

Specifications:

DC VOLTAGE

DC CURRENT

AC VOLTAGE

 
RESISTANCE

 
TRANSISTOR hFE TEST (0-1000)

 POWER

9V (6F22) x 1

Features
· 3½ Digit Multimeter with Backlight
· 1,999 Count
· Non Contact Voltage (NCV)
· Auto Power Off (APO) under natural operation  
· True RMS

Special Function

Standard Accessories: Test Lead, Manual

Dimension : 225(H) x 38(H) x 26(D)mm

Specifications:

DC VOLTAGE

 DC CURRENT

 AC VOLTAGE

 AC CURRENT

Features:

· 3⅚ DIGIT

· 5,999 COUNT

· TRUE RMS

· DATA HOLD

· DUTY CYCLE TEST

· AUTO RANGE MODE

· AUTO POWER OFF

Power : AAA1.5 V x 2
Dimension : H140 x W72 x D37 mm
Weight: Approx 195 g.
Accessories: Test leads, User Manual, TP04 Thermocouple & Battery.

 
Specifications:

DC VOLTAGE

DC CURRENT

AC VOLTAGE

AC CURRENT