Instruhub

Lutron EMF-822A EMF TESTER,Pocket

FEATURES
* The EMF tester is designed to provide user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances and industrial devices. The EMF tester is a cost effective, hand-held instrument designed and calibrated to measure electromagnetic field radiation at different bandwidths down to 50 Hz/60 Hz. Display micro Tesla & milli Gauss in the same tester.

APPLICATIONS
This EMF tester is specifically designed to determine the magnitude of electromagnetic field radiation generated by power lines, computer's monitor, TV sets, video machinery and many other similar devices.

CAUTION OF ELECTROMAGNETIC FIELD EXPOSURE
Claims by some scientists that long term exposure to electromagnetic field may be the cause of childhood leukemia & other forms of cancer. Complete answers to any of these and related questions are not currently available. At the present time the most common practice is to avoid excess exposure over long period of time. "Prudent Avoidance" as stated by the Environmental Protection Agency(EPA) USA is recommended.

GENERAL SPECIFICATIONS
Display :13mm (0.5") LCD, 3 1/2 digits. Max. indication 199.9.
Range/Resolution :Two function : micro Tesla & milli Gauss :
20 micro Tesla x 0.01 micro Tesla
200 milli Gauss x 0.1 milli Gauss
* 1 micro Tesla = 10 milli Gauss
Band width :30 Hz to 300 Hz.
Number of Axes :Single axis.
Accuracy :± ( 4 % + 3 d ) at 50 Hz or 60 Hz.
Over-input :Display shows " 1 " .
Sampling Time :Approx. 0.4 second.
Battery :DC 9 V battery (006P, 6F22).
Power Current :Approx. DC 3 mA.
Operating Temp. :0 to 50 ( 32 to 122 ). ℃ ℉
Operating Humidity :Less than 80% R.H.
Weight :165 g/0.36 LB (including battery).
Dimension :H.W.D. - 131x70x25 mm(5.2x2.8x1.0 inch).
Accessories Included :Operation Manual

MEASURING PROCEDURE
Place the " OFF/micro Tesla/milli Gauss Switch " to the " milli Gauss " or " micro Tesla " position according the measurement requirement. Tester is now ready to take the measurement.Due to the electromagnetic interference of the environment, the display reading may show small values before testing, for example less than 0.5 gauss. This is not malfunction of the tester. With the tester in hand, move slowly towards to the object under measurement until it is physically touched. Notice how the field intensity increases as you move closer to the object. Position the EMF tester at different angles to the object under measurement and observe how this may affect your reading. By trying different angles approaching the object under measurement, recorder the highest value shown on the display.

RECOMMENDATION
It is recommended to measure the presence of the electromagnetic field inside and outside of your home and business locations regularly. As "hot spots" are detected by the EMF tester, re-arrangement of the living and working areas is lightly recommended. Always try the best to avoid long term exposure to strong electromagnetic field.

We DFT TECH, are Lutron Authorized Distributors, Importers, Stockists, Dealers and Suppliers of EMF-822A EMF TESTER,Pocket Products in Chennai, Bangalore, Hyderabad, Pune, Mumbai, Delhi, Calcutta, Ahmedabad, Sricity, Ambattur, Guindy, Sriperumputhur, Oragadam, Tiruvallur, Trivandrum , Coimbatore, Tiruchy and etc..

• Polarization Index (PI)
• Dielectric Absorption (DAR)
• Auto Power Off (APO 15 Minutes)
• USB Interface
• High Voltage Indication

Meter 1PC
High voltage bar 1PC Red
High voltage test line 2PCS (Black, Green each 1)
Monitoring Software CD 1PC
USB communication line USB 1PC
Charger 1PC
Manual, certificate 1 Set
Instrument Box 1PC

• Double Insulation
• 100Cm length with Teflon Tape Insulation
• CAT III 1000V 10A

This mobile handheld device is the innovation in the area of ​​non-contact layer thickness measurement.

Would you like to measure the layer thickness early in the process to save material and avoid coating errors? Then the coatmaster Flex is your measuring device.

You too can optimize your production process and secure your coatmaster Flex.

Convince yourself of its performance and, with the coatmaster Flex, you can demonstrably save up to 6,000 euros a month on coating material per production line. Reduce waste and increase production quality.

Importers Distributors,Dealers of MOTWANE suppliers are tirupur,thiruvannamalai,Nilgiris,Villupuram,Virudunagar,Erode,Madurai,Thanjavur,Tiruchirappalli,Kanchipuram,Dharmapuri,Salem,Cuddalore

Motwane’s MOTR is a microprocessor based compact, designed for precise measurement of the dissipation factor and volume resistivity of insulating oils. MOTR is built in single unit and on boarded with International test standards for automatic measurement of all parameters. It is also available with customized test sequences to conduct test as per user’s requirement. 

Motwane’s MOTR is a microprocessor based compact, designed for precise measurement of the dissipation factor and volume resistivity of insulating oils. MOTR is built in single unit and on boarded with International test standards for automatic measurement of all parameters. It is also available with customized test sequences to conduct test as per user’s requirement. Test cell is designed as per IEC 60247 with precise control for measuring dissipation factor and resistivity at 27° C & 90° C. MOTR has auto oil drain facility. It is provided with internal memory & printer for on field report and also has USB interface available for data transfer. The calibrator with standard dissipation factor & Resistivity ranges available for validating performance of MOTR.

MOTR has Bluetooth connectivity module with Motware mobile app for remote access of testing data & storage at cloud for further analysis & record purpose.

Motware Cloud Application

Motwane has designed and developed MOT-WARE – a cloud based Test Data platform to aid in Accurate Asset Health Assessment. Through Motware the Test and Measurement industry has taken a huge leap forward. It is a revolution in the way tests are conducted and the way data is analysed.

MOT-WARE captures data from a full Range of BLE Enabled Motwane Testing Equipment. It is accessible from web based application, desktop application and mobile application. In addition, it offers an open architecture that can seamlessly integrate with any Non Motwane Test and Measurement Equipment for quick and authentic Digital Test data. Data can be captured periodically as well and streamed real-time via sensors from IoX’n Series of IoT devices. (link to Ioxn page)

Some of its featured include a pre-loaded repository of Test templates for various assets as well as Customizable Test Templates. A Customized Report Builder in MOT-WARE allows users to generate reports that can be designed and generated as per their desire. MOT-WARE also has the facility to upload test data history and Break-down history of Assets. Tests can also be viewed by various metrics, such as Pass/Fail.

Digital Test data enables Data Analytics and Data visualisation which have several advantages. It improves productivity & efficiency, it enables cost reduction and improves asset life. Data analysis  done through MOT-WARE includes Trend Analysis, MIS reports and Pivot Tables. As an Add on MOT-WARE also offers ‘Motwane AI Analytics’(Link to AI Analytics page)  which uses a proprietary AI algorithm and Machine Learning to make accurate predictions about your assets life based on its behavioural patterns and operating conditions.

MOT-WARE can be used for various applications across customers segments like Utilities, OEMs, Industries, Electrical contractors (Testing, O&M) or Field repairs & service providers, EPCs, commercial premises and many more.

Join the latest innovation in Electrical Testing by using Motware on your Test and Measurement Equipment.

Cable testing you trust.  Network testing you need.

• Measure network cabling performance up to 10 Gig via frequency based measurements
• Troubleshoot active networks by providing connected switch information (Switch Name, IP Address, MAC Address, Port Number, and VLAN info)
• Test connectivity to TCP/IP network through IP configuration and ping
• Verify Gateway and DNS server responsiveness and availability
• Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test.  Ethernet Alliance PoE Certified for reliable multivendor interoperability.
• Graphical wiremap and length test to identify common faults that occur with cabling installation
• Document work through LinkWare™ PC reporting
• Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
• Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)

General Specifications

Feature

Description

Languages supported in UI

English, German, French, Japanese, Spanish, Thai, Traditional Chinese, Simplified Chinese, Korean, Russian, Italian, Portuguese

Weight

1 lbs 6 oz (624g)

Battery

Type: Lithium-ion, 3.6 V, 6400 mAh
Life: 8 hours typical
Charge time: 4.5 hours
Charging temperature range: 0 °C to +40 °C

Power Adapter

Input: 100 to 240 VAC ±10%, 50/60Hz
Output: 15 VDC, 2 A maximum
Class II

Host Interface

USB type C

Display

800 x 480 color capacitive multi-touch

Dimensions

8.5 in x 4.5 in

Operating Temperature

0°C to 45°C

Storage Temperature

-10°C to +60°C

Operating Relative Humidity

0 % to 90 %, 0°C to 35°C
0 % to 70 %, 35°C to 45°C

Operating Altitude

4,000 m
3,200 m with ac adapter

Vibration

Random, 2 g, 5 Hz-500 Hz

Drop

1 m drop, 6 sides

Active Network Diagnostics

Feature

Description

Diagnostic Protocols

Link Layer Discovery Protocol (LLDP)
Cisco Discovery Protocol (CDP)
Fast Link Pulses (FLP)
Internet Control Messaging Protocol (ICMP)
Dynamic Host Configuration Protocol (DHCP)

IP Address Setup

LinkIQ address, DNS Server, Gateway for IPv4 or v6 either manually or via DHCP.

IP Ping Test Results

Four response time results for target, DNS Server(s), Gateway, plus average and number lost

Nearest Device Diagnostics (If available through diagnostic protocols)

Switch Name / IP + MAC Address
Port Number
VLAN Name
Advertised Data Rates
Advertised Duplex

Power Over Ethernet Compatibility

Ethernet Alliance Certified to IEEE 802.3af/at/bt
Hardware negotiation with signature resistance
Software negotiation with LLDP/CDP

Power Over Ethernet Diagnostics

Advertised Power Class (0-8)
Advertised Available Power
Powered Pairs
Diagnostics for both Single and Dual signatures

Power Over Ethernet Measurements

Loaded Voltage (V)
Loaded Power (W)

Port Blink

Blink the light of the connected port

• Diode Test
• Auto Power Off (APO)
• Low Battery indication

Diode Check: Open Voltage : 2.8V
Testing Current : 2mA

Continuity Check When the resistance is less than 30Ω, the buzzer is sounded

POWER: CR 2032 (3V X 1)

Importers Distributors,Dealers of MOTWANE suppliers are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi,Thirupattur

MOTWANE’s Digital Clamp Meter DCM 39A & DCM 9930A comprises high precision, industrial grade, RMS, auto-ranging clamp meters with 3¾ digits display. Both the clamp meters can be used as multimeters with test leads for AC/DC measurements of up to 400 mA, along with measuring AC/DC voltage, resistance, frequency, capacitance, duty cycle, diode, continuity, etc. 

MOTWANE’s Digital Clamp Meter DCM 39A & DCM 9930A comprises high precision, industrial grade, RMS, auto-ranging clamp meters with 3¾ digits display. Both the clamp meters can be used as multimeters with test leads for AC/DC measurements of up to 400 mA, along with measuring AC/DC voltage, resistance, frequency, capacitance, duty cycle, diode, continuity, etc. These clamp meters are provided with multiple safety features like a water-resistant front panel and fireproof heavy-duty ABS casing. It uses the Hall Effect sensor for measuring the current. The model DCM 39A measures AC/DC currents up to 1000A. The model DCM 9930A measures AC/DC currents up to 2000A.

Application

• Generation, Transmission & Distribution 
• Substation Process industries
• OEMs 
• Railways 
• Telecom Industries 
• Service Industries

Features

• Auto-ranging 3¾ digits (3999) LCD-display
• True RMS reading for ACV & ACA 
• 2 in 1 clamp meter + Digital Multimeter
• Overload protection for all ranges
• Data hold feature with relative key facility 
• Water resistance front panel, fireproof heavy-duty ABS casing 
• Current sensor- Hall Effect Sensor
• Over range indication: ‘OL’ is displayed
• Max conductor size is 60mm approx
• Power – one 9V battery type (6F22) 

General 

Display : 3 ¾ Digits LCD display. 

Dimension  (H X W X L)  : 255 X 73 X 38 mm (approx.)

Net weight : 515 gm with battery (approx.)

Power 

Power Supply : 9V Battery Type 6F22

Standard Accessories
Pair of Test Leads, User Manual, One 9V Battery installed

AC/DC Current (True RMS for AC)- DCM39A

Overload protection : AC/DC 500mA(Fuse) 

                                AC/DC 1000A/1000V 

Frequency Response : 45Hz – 1KHz

Importers Distributors,Dealers of MOTWANE suppliers are tirupur,thiruvannamalai,Nilgiris,Villupuram,Virudunagar,Erode,Madurai,Thanjavur,Tiruchirappalli,Kanchipuram,Dharmapuri,Salem,Cuddalore

DCM49A is a general purpose 3¾ digits AC/DC clamp meter with a backlight and an LCD display. The jaw opening is 60mm approx and can measure AC/DC up to 1000A. It also measures DC voltage-1000V, AC voltage-700V, resistance up to 40MΩ, frequency-10 MHz with duty cycle, continuity & diode measurements.

DCM49A is a general purpose 3¾ digits AC/DC clamp meter with a backlight and an LCD display. The jaw opening is 60mm approx and can measure AC/DC up to 1000A. It also measures DC voltage-1000V, AC voltage-700V, resistance up to 40MΩ, frequency-10 MHz with duty cycle, continuity & diode measurements. This meter also has a capacitance range of up to 100µF & is powered by a 9V battery.

Application

• Power Utility
• Industries 
• Electrical Contractor
• Telecommunication
• Railway

FEATURES

• 3 ¾  digits LCD display, 4000 counts, multi-function 1000A AC/DC
• Large jaw size: 60mm
• Function rich, AC/DC Current, AC/DC voltage, resistance, diode, continuity, capacitance, frequency, and duty cycle
• Large display with a backlight for rich annunciations
• Auto power off for battery life-saving
• Relative reading and data hold functions 
• Ergonomic design for improved holding
• Suitable for use in appliance testing, portable tools, and building wiring
• Testing of electronic/electrical products.

Accuracy

• All accuracy is claimed from 10% to 95% of the range. 
• All claims of accuracy are at decade value i.e 10, 100 tec.
• Accuracy is specified as ±(% of reading + offset in least count digits)
• Accuracy is claimed at  23̊C ± 3̊ C, 55% ±10% RH humidity.

 Insulation Tester/Mega Ohm Meter:

All electrical installations and equipment comply with insulation resistance specifications so they can operate safely. Whether it involves the connection cables, the sectioning and protection equipment, or the motors and generators, the electrical conductors are insulated using materials with high electrical resistance in order to limit, as much as possible, the flow of current outside the conductors. Insulation resistance measurement is nondestructive under normal test conditions.

 Carried out by applying a DC voltage with smaller amplitude than for dielectric testing, it yields a result expressed in kW, MW, GW or TW. This resistance indicates the quality of the insulation between two conductors. Because it is non-destructive, it is particularly useful for monitoring insulation aging during the operating life of electrical equipment or installations. This measurement is performed using an insulation tester, also called a megohmmeter.

Application:

• Electrical insulation testing
• High insulation testing
• Used for overvoltage and under voltages
• Short-time or spot-reading measurement

Importers Distributors,Dealers of 3nh Benchtop Spectrophotometer are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi

·         3nh launched new model YD5010 Grating Spectrophotometer Densitometer with 45/0(45 ring-shaped illumination 0 degree viewing angle) comply to standard ISO 5-4CIE No.15. It is suitable for using in ink printing in Film Processing Textile

• Details

3nh launched new model YD5010 Grating Spectrophotometer Densitometer with 45/0(45 ring-shaped illumination, 0 degree viewing angle), comply to standard  ISO 5-4,CIE No.15. It is suitable for using in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing; and it is able to customize single aperture Φ2mm，Φ4mm，Φ8mm.

Under the 45/0 geometric optical illumination and the testing conditions of M O, M 1，M 2 , M 3 stipulated by ISO 13655 standard, the instrument can accurately measure the reflectance data of samples. Under multiple color spaces, it can accurately measure various printing density indexes, color difference formulas and color indexes, and can meet the user's regular testing of various parameters.

1.Perfect combination of the beautiful appearance and the ergonomic structure design;

2.Combined LED light sources with long life and low power consumption, including UV light;

3.Optional apertures: Φ2/4/8mm, adapt to more samples;

4. Accurately measure reflectance spectrum, CMYK density and Lab value of the sample;

5.High-configuration electronic hardware: 3.5-inch TFT true-color screen, capacitive touch screen, concave grating, 256-pixel dual-array CMOS image sensor, etc.；

6.Two standard observer angles: 2/10, multiple light source modes and color systems;

7.USB mode is widely useful;

8.Large-capacity storage space, over 10,000 test data;

9.Especially suitable for process control and quality control of printing plants;