Instruhub

• 3½ Digit Manual Multimeter with Backlight
• 1,999 Count
• Auto Power Off (APO) under natural operation
• Full protection in All Ranges

• Diode Test Anti Shock Protect
• Transistor Testing Input impedance 10MΩ
• Continuity Buzzer Approx. <30Ω+10Ω Sampling Rate 3 times per second
• Low Battery Display Approx. <7.5V AC Frequency Response 40-400Hz
• Auto Power OFF Approx. 30min. Power 9V (6F22) X 1

Standard Accessories: Test Lead, Manual

Dimension : 185(H) x 93(W) x 35(D)mm

• 3¾ Digit Clamp Meter with Backlight
• 4000 Count
• Full Function Protection, Strong anti-interferential Performance
• Temperature & Non Contact Voltage (NCV)
• Frequency Test
• True RMS
• Clamp Torch
• Jaw Open : 52mm

POWER : AAA 1.5Vx2

Standard Accessories : Test Lead, Manual, Soft Carrying Case TP04 Temperature probe

Dimension : 123(H) x 270(W) x 35(D)mm

• Data Hold
• Auto Power Off (APO)
• Peak Hold (LX-102A)

Standard Accessories: Soft Carrying Case, Manual

Dimension: Photo Detector: 100(H) x 60(W) x 27(D)mm
130(H) x 95(W) x 30(D)mm

• AUTO MANUAL / RANGING
• MAXIMUM MODE 
• DATA HOLD 
• LOW BATTERY DISPLAY 
• AUTO POWER OFF 
• SAFETY RATING: CAT III 600V

byko-swing König:

Damping method for paints & coatings - automatic version:

• Includes base unit and König pendulum
• Can also be used for Persoz method with optional Persoz pendulum

Features:

Fully automated instrument for measuring pendulum hardness in accordance with the König and Persoz methods.

·        Automated design ensures reliable and repeatable measurement of coating hardness by reducing operator intervention

·        Motorized sample platform lifts the sample into the test position

·        Pendulum is positioned and released automatically

·        Automatic counter with signal when deflection is below 3° (König) or 4° (Persoz) respectively

·        Changeable from König to Persoz and vice versa with corresponding pendulum

·        Pre-assembled draft shield with easy access door

·        UL/CE/CSA certification

·        Compliant with ASTM D4366 and ISO 1522

·        Smallest sample size: 65mm x 75mm (2.6 x 3.0 inches)

·        Largest sample size: 102mm x 229mm (4.0 x 9.0 inches)

·        Maximum sample thickness : 8.5mm (0.33 inches)

·        Minimum sample thickness is limited by the rigidity of the sample.

• Weight

200 g ± 0.2

• Ball Diameter

5 mm

• Deflection Start/End

6° / 3°

• Period of Oscillation

1.4 s

• Damping Time on Glass

250 s ± 10 s

General

• Power supply

100 - 240 V, 50/60 Hz, max. 1 A

• Weight

18.4 kg

• Weight

40.6 lb

• Dimensions: L x W x H

25 x 28 x 77 cm

• Dimensions: L x W x H

10 x 11 x 30.3 in

Standards:

ISO

1522

ASTM

D4366

Other Variations:

byko-swing Persoz

byko-swing König/Persoz

QuintSonic T measures of up to eightcoatings in a single operation.

It can measure polymer coatings such as paints, varnishes and synthetic material, as well as glass, ceramic or metallic coatings on virtually any substrate.

Precise and easy to handle, QuintSonic T can measure all typical coating systems such as:

·         Lacquers on synthetic material

·         Synthetic material on wood

·         Glass on metal

·         and many more.

Featuring a generous 8-inch display, QuintSonic offers a user-friendly overview of the result of measurement as well as the corresponding course of the ultrasonic signal (A-scan). Parameters for signal adjustment are displayed simultaneously and can thus bie adapted to the current measurement with significant time savings. Subsequient adjustment of parameters is also possible through the new memory option for A-scans.

In addition, QuintSonic T is characterized by simple handling via touch screen and intuitive user guidance. The measuring program also offers a clear data structure with integrated test report generation.

QuintSonic T is also ideally suited for harsher environments due to IP 67 & MIL-STD 810 G and extremely resistant Gorilla® glass.

Non-destructive measurement of::

·         Varnish, synthetic materials, glass, enamel and other coatings on wood, synthetic materials, glass, metal and ceramic

·         Metal coatings on synthetic materials, ceramic and wood

·         Up to 8 coatings in a single operation.

Also suitable for wall thickness measurement.

·         Ultrasonic reflection (DIN EN ISO 2808, method 10)

·         Quick evaluation of the measuring signal, high accuracy and repeatability owing to the sensor-integrated digital 32-bit signal processing  (SIDSP®)

·         Over 40 measuring values per minute: start, wait for 1 second, done.

·         Mere 5 mm measuring area enables gathering measurement on tiny and curved parts

Anton Paar-Brabender FarinoGraph

·        Compliant: Cover flour and dough standards (ICC, AACCI, ISO)

·        Efficient: Your data. Anywhere at any time. From any device

·        Versatile: Seven attachments for the right sample type and size

·        Flexible: Measure any kind of flour – also gluten-free doughs

·        Precise and safe: Automate water dosing for zero glass hassle

The Brabender FarinoGraph determines the water absorption of flour and rheological properties of dough. It addresses key national and international standards like ICC, AACCI, and ISO. It ensures confidence in grain, flour, and dough quality across the entire value chain with a universally recognized language: Brabender/Farinograph Units (BU/FU).

MetaBridge software sets the benchmark in the industry and ensures intuitive instrument operation, while harnessing the power of unique features like prediction and correlation curves. Access to measurements from any device at any time, like mobile devices or a laptop, facilitates effortless data sharing with colleagues and third-party systems.

Technical specifications

Technical specifications

Xsample 520

• ¹ Recommended for samples with a viscosity up to 500 mPa•s at ambient and measuring temperature. For samples with a viscosity higher than 500 mPa•s at ambient and measuring temperature, bubbles may occur during filling.
• Optional Bar Code Reader

TECLOCK- 0.001mm Dial Indicator:

• Standard type dial indicators of graduation 0.001mm and bezel diameter 56mm.

• Durability is pursued by protecting mechanical parts like gears with shock absorbing mechanism (Teclock unique shock proof mechanism).

• Jeweled bearing is applied for improving durability.

• Stable repeatability accuracy is realized with lever enlargement mechanism built–in.

• Tolerance hand is provided as standard accessory for all models for positive tolerance setting.

• Lifting lever (Option) can be mounted (Refer to page 25).

• Bezel clamp (Option) can be mounted (except for TM-1201PW).

• Measuring ability can be changed.

• In case that flat back is required, add suffix “f” to the end of model number (example =TM-1201f)

Model:

Measuring Range 1mm

·Jeweled bearing durability

·Quench hardened stainless steel stem

·Measuring Range 1mm

·Jeweled bearing durability

·Quench hardened stainless steel stem

·Measuring Range 1mm

·One Revolution 0.1mm

·Jeweled bearing durability

·Quench hardened stainless steel stem

·Green Dial

·Measuring Range 2mm

·Jeweled bearing durability

·Quench hardened stainless steel stem

 Measuring Range 5mm

Quench hardened stainless steel stem

TECLOCK-0.01mm Long Stroke Dial Indicator:

• 20mm, 30mm long stroke dial indicators are available.

• Teclock unique shock proof mechanism is built–in to all models.

• Lifting lever (Option) can be mounted (except for KM-121PW).

• Bezel clamp (Option) can be mounted (except for KM-121PW).

• In case that flat back is required, add suffix “f” to the end of model number (example =KM-121f).


Models:

·Measuring Range 20mm

·Measuring Range 20mm

·Measuring Range 20mm

Measuring Range 30mm

·Measuring Range 30mm

·Measuring Range 30mm

·Measuring Range 30mm

·Measuring Range 30mm

TECLOCK- Long Stroke Dial Indicator:

• 50mm, 100mm, 150mm long stroke dial indicators with large graduation plates are available.

• Measuring up to 150mm is materialized with highest precision components of high durability and Teclock original and unique enlargement mechanism is built-in.

• Bezel clamp (Option) can be mounted (except for KM-05100 /KM-05150).

• Long stroke dial Indicator is widely used for construction, civil engineering industries etc.

• In case that flat back is required, add suffix “f” to the end of model number (example =KM-155f ) (except for KM-05100 /KM-05150).

Model:

Graduation 0.05mm

Measuring Range 50mm ·Shock Proof

Graduation 0.01mm

Measuring Range 50mm

Shock Proof

Graduation 0.01mm

Measuring Range 50mm

Shock Proof

Graduation 0.05mm

Measuring Range 100mm

Graduation 0.05mm

Measuring Range 150mm

TECLOCK-Auto-Clutch Test Indicator (Low measuring force):

Models:

1.
  1. LT-352-5-Standard type

·Graduation 0.01mm

·Measuring Range 0.8mm

·Measuring Force 0.05N or less

·Graduation 0.002mm

·Measuring Range 0.28mm

·Measuring Force 0.1N or less

·Graduation 0.01mm

·Measuring Range 0.8mm

·Measuring Force 0.05N or less

·Graduation 0.001mm

·Measuring Range 0.2mm

·Measuring Force 0.15N or less

TECLOCK- Small Dial Indicator:

•As bezel diameter is small (minimum diameter=36mm), these are suitable to measure at the narrow setting space of production lines and many measuring points by being mounted to the machine.

• Lifting lever (Option) can be mounted (except for TM-34).

• In case that flat back is required, add suffix “f” to the end of modelnumber (example =TM-35f).

• Measuring range 3.5mm, 4mm, 5mm, and 10mm are available despite small size.

• Bezel clamp (Option) can be mounted.

• Measuring ability can be changed

Model:

·Graduation 0.01mm

·Measuring Range 5mm

·Graduation 0.1mm

·Measuring Range 10mm

·Graduation 0.01mm

·Measuring Range 5mm

Graduation 0.01mm

·Measuring Range 5mm

Graduation 0.01mm

·Measuring Range 10mm

Graduation 0.01mm

·Measuring Range 4mm

·Graduation 0.005mm

·Measuring Range 3.5mm

·Graduation 0.01mm

·Measuring Range 3.5mm

Graduation 0.01mm

·Measuring Range 3.5mm

TECLOCK- One Revolution Dial Indicator:

•These are indicators that are effective for comparative measurement with 0.0005mm, 0.001mm, and 0.01mm.

• High durability is realized with Teclock original and unique enlargement mechanism is built-in.

• Limiter is mounted as standard.

• Measuring ranges are subdivided to 0.08mm, 0.16mm, 0.2mm and 1.0mm.

• Clump is attached to 0.001mm model.

• Lifting lever (Option) can be mounted.

• In case that flat back is required, add suffix “f” to the end of model number (example =TM-1200 f).

Model:

Graduation 0.001mm

Measuring Range 0.16mm

With Bezel clamp

Graduation 0.001mm

Measuring Range 0.08mm

With Bezel clamp

Green Dial With Limiter

Graduation 0.001mm

Measuring Range 0.2mm

With Bezel clamp

With Limiter

Graduation 0.01mm

Measuring Range 1.0mm

Bezel clamp (Option)

Green Dial ·With Limiter

Graduation 0.1mm

Measuring Range 3.2mm

Bezel clamp (Option)

Green Dial

Graduation 0.0005mm

Measuring Range 0.08mm

Green Dial

TECLOCK-Bore Gauge (CN type) for small hole:

These are bore gauges for small holes of which internal diameter is 18.5mm and high accuracy measuring is possible as well as standard type bore gauges.

Models:

• CN-10

Measuring Range （mm） 6～10

Effective Measuring Range （mm） 0.5

Total Range Error （µm） 5

Adjacent Error （µm） 2

Repeatability （µm） 2

Weight （g） 70

• CN-18

Measuring Range （mm） 10～18.5

Effective Measuring Range （mm） 0.6

Total Range Error （µm） 5

Adjacent Error （µm） 2

Repeatability （µm） 2

Weight （g） 80

TECLOCK- Bore Gauge (CD type):

• Compliance with JIS B 7515A.

 • Anvil and Contact point are using the carbide ball.

 • The measuring depth can be extend using the extension rod to measure a deep hole.

Models:

Standard type-

• CD-35
• CD-60
• CD-150
• CD-160
• CD-250
• CD-400

Short type-

• CD-35S
• CD-60S
• CD-150S
• CD-160S
• CD-250S
• CD-400S

Anton Paar- Mechanical Surface Testing Platforms Step 501

Step platforms are the basis for Anton Paar’s mechanical surface measuring heads and are the most versatile on the market. With these platforms you can conduct up to four testing methods on a single platform: scratch, indentation, Vickers hardness, and basic tribology. Take advantage of the improved sample navigation features while retaining the high positioning accuracy (<1 µm) over a great length. Customized synthetic granite ensures enhanced vibration damping. 

• The most versatile surface testing platform on the market

Revolutionize your testing capabilities with an all-in-one platform! Combine scratch, instrumented indentation, automatic conventional hardness, and tribology testing over a wide force range. Save time by transitioning from one method to another with zero setup adjustments. Whether you buy a single head or a full all-in-one setup, our Step platform solution keeps the door open for a future upgrade.

• Navigate two times faster

Go twice as fast when it comes to sample visualization thanks to the unique features of the dual view microscope: continuous zoom with a remarkable magnification range (20x to 10000x) and seamless transition from a panoramic surface overview to maximum magnification.

• Help when you need it

Whether it's technical, after-sales, or application support you need, we have 37 subsidiaries around the globe ready to help wherever you are. We’re confident in the high quality of our instruments. That’s why we provide a full 3-year warranty.

• Reduce costs via automation

We can help you integrate your Step platform into the QC area of your production plant for automatic sample handling, loading, and testing. This reduces costs and increases measurement throughput.

• Reduce effort, save time

You can mount differently sized samples on the instrument and measure them directly off the production line. Unlock bespoke solutions designed specifically for your sample holding needs, available upon request.

TECLOCK-0.01mm /0.005mm Dial Indicators:

1.      0.01mm Dial Indicator:

•This is the most standard type dial indicator of graduation 0.01mm

• The model can be selected out of stainless stem, coaxial revolution pointer, oil discharge function and analog function depending on usage.

• These are standard series with high durability and high accuracy by pursuing parts accuracy.

• Lifting lever (Option) can be mounted (Refer to page 25).

• Bezel clamp (Option) can be mounted (except for TM-110PW / TM-110G ).

• Measuring ability can be changed.

• In case that flat back is required, add suffix “f” to the end of model number (example =TM-110f).

Model:

·Measuring Range 10mm

·Quench hardened stainless steel stem

·Measuring Range 10mm

·Measuring Range 10mm

·Measuring Range 10mm

·Quench hardened stainless steel stem

·Measuring Range 10mm

·Measuring Range 10mm

·Graduation spec (0-0.5-1.0)

·Green Dial

Measuring Range 5mm

·Balanced scale

Measuring Range 5mm

Measuring Range 5mm

 
2.      0.005mm Dial Indicators:

·Measuring Range 5mm

TECLOCK-Bore Gauge (CD type) for shallow hole:

Models:

Measuring Range （mm） 15～35

Effective Measuring Range （mm）1.2

Total Range Error （µm） 4

Adjacent Error （µm） 1

Repeatability （µm）1

Weight （g） 180

Measuring Range （mm） 35～60

Effective Measuring Range （mm）1.2

Total Range Error （µm） 4

Adjacent Error （µm） 1

Repeatability （µm）1

Weight （g） 200

• CD-150F

Measuring Range （mm） 50～150

Effective Measuring Range （mm）1.2

Total Range Error （µm） 4

Adjacent Error （µm） 1

Repeatability （µm）1

Weight （g） 210

• CD-35FS

Measuring Range （mm） 15～35

Effective Measuring Range （mm）1.2

Total Range Error （µm） 4

Adjacent Error （µm） 1

Repeatability （µm）1

Weight （g） 140

• CD-60FS

Measuring Range （mm） 35～60

Effective Measuring Range （mm）1.2

Total Range Error （µm） 4

Adjacent Error （µm） 1

Repeatability （µm）1

Weight （g） 160

• CD-150FS

Measuring Range （mm） 50～150

Effective Measuring Range （mm）1.2

Total Range Error （µm） 4

Adjacent Error （µm） 1

Repeatability （µm）1

Weight （g） 170

The QuintSonic 7 measures of up to five coatings in a single operation.

It can measure polymer coatings such as paints, varnishes and synthetic material, as well as glass, ceramic or metallic coatings on virtually any substrate.

The QuintSonic 7 means problem-free and, above all, precision measurement of typical coating systems such as:

·         Lacquers on synthetic material

·         Synthetic material on wood

·         Glass on metal

·         and many more.

Non-destructive measurement of::

·         Varnish, synthetic materials, glass, enamel and other coatings on wood, synthetic materials, glass, metal and ceramic

·         Metal coatings on synthetic materials, ceramic and wood

·         Up to 5 coatings in a single operation.

Also suitable for wall thickness measurement.

·         Ultrasonic reflection (DIN EN ISO 2808, method 10

·         Quick evaluation of the measuring signal, high accuracy and repeatability owing to the sensor-integrated digital 32-bit signal processing  (SIDSP®)

·         Over 40 measuring values per minute: start, wait for 1 second, done.

·         Mere 5 mm measuring area enables gathering measurement on tiny and curved parts

·         Graphic display showing individual coatings, zoom-enabled A screen and menu-driven user guidance

·         QuintSonic 7 basic unit

·         Ultrasonic sensor with 1 m / 40″ sensor cable

·         USB-Adapter cable

·         Software QSoft 7 Basic Edition on CD

·         Operating manual German / English on CD

·         1 bottle coupling gel by ElektroPhysik, 100 ml

·         4 batteries AA / LR06

·         Plastic carrying case

The PoroTest 7 helps you to locate pores, fissures and other faults in non-conductive coatings on conductive basis material such as steel, aluminium, concrete, etc. It therefore provides optimal protection from:

·         Internal and external corrosion

·         Secondary damage due to minute coating defects

·         Damage to highly sensitive foodstuffs

·         Dangerous chemical reactions

·         Cost-intensive re-coatings due to undetected defects

The PoroTest 7 is designed for use with boilers, pumps, tanks and other receptacles, but also for offshore installations, drilling rigs, ships or pipelines.

Holiday detector for detecting pores and holes in insulating materials on conductive substrates such as steel, aluminium, concrete etc.

·         Testing of insulating coatings in a thickness range of 30 µm to 11.3 mm

·         Electronically stabilised high-tension assures secure detection of pinholes and pores.

·         Large selection of test electrodes adapted to specific applications.

·         Test voltage 0.5 to 35 kV

·         Operateur menu on display in four languages

·         Optical and acoustic alert

·         Ideal for on-site testing through its ergonomic and sturdy design

·         Electrical safety provisions according to VDE 0411, part 1

·         Power supply: AC operated or battery operated via integrated rechargeable battery

A measuring device conceived for rough use on a construction site to gauge the thickness of all non-metallic layers in the context of construction work, like bituminous mixtures (asphalt), blast furnace slag, concrete etc.

The measuring process is non-destructive and TP D-StB 12 approved (Technical testing regulations applicable for calculating surface thickness in road construction) to gauge individual and total thickness of layers in road construction.

A measuring device conceived for rough use on a construction site to gauge the thickness of all non-metallic layers in the context of construction work, like bituminous mixtures (asphalt), blast furnace slag, concrete etc.

The measuring process is non-destructive and TP D-StB 12 approved (Technical testing regulations applicable for calculating surface thickness in road construction) to gauge individual and total thickness of layers in road construction.

Use of the device in road constructions typically involves placing aluminium foil at the base of an asphalt layer yet to be applied. The foil gets packed in by the gravel mix and thus does not hamper the process of inter-layer bonding. Decades of experience have shown that the foils do not affect the stability of the asphalt layers.

Unlike the core drill method, this does not damage the construction layer.

The measuring reflectors can be located by a bar graph display on the measuring device or acoustically by the headphone included in the delivery.

There are three kinds of probes available for special applications in the construction sector:

·         N 100ST: Up to 100 mm to measure the covering layer in road construction

·         N 400ST: Measuring range between 0 and 400 mm to measure the base and covering layers in road construction

The cross hatch testers from the SecoTest series consist of a sturdy holder for the six-edge multi cutting blade and a rotatable non-slip grip, which prevents the multi cutting blade from canting.

To ensure the procedure’s reproducibility, the test object should be put through a suitable conditioning process (see DIN EN ISO 2409, section 6). For tests at construction sites, ambient conditions should be recorded in the test report. The procedure defined by ISO 4624 can be used to measure adhesiveness.

Heavy-duty cross hatch cutter to assess adhesiveness of lacquer coatings on hard and soft substrates

·         High-grade, tool-steel multi cutting blade in 4 different models with standard cutting-edge geometry

·         Multi-cutting blade with six edges

·         Movable cutter head

·         Cross hatch cutter SecoTest

·         Multi-cutting blade

·         Magnifier

·         Brush

·         Short instructions

·         Plastic carrying case

• 9 Voltage Settings
• Bright LED Visual INDICATION with Buzzer
• Protection class IP65
• Non-Contact Test Detection by Proximity
• Light Weight, Robust and Compact
• The Max Detection Range Can be 500kV
• The measuring wire is Horizontal with the lighting lamp placed vertical to it.

★ The reminding distance is about 5cm when testing 240V voltage

★ The corresponding voltage reminder distance for other range tests is about 20cm

★ The closer the instrument is to the wire, the lower the voltage will be

• Used for ambient temperature, humidity, dew point temperature, wind speed & air volume
• Data Hold
• Auto Power Off (APO)
• USB Real Time data uploading functions
• Backlight LCD

POWER : AAA 1.5V X 3

Standard Accessories : Soft Carrying Case, Manual, USB Cable & Software

Dimension : 165(H) X 85(W) X 38(D)mm

• ˚C/˚F Selection
• Automatic Data Hold Function
• Over Range indication
• Max./Min. Difference & Average record
• Trigger Lock
• Auto Power Off (APO)
• Type K temperature measurements
• Colour LCD Display with Backlight

POWER : 9V (6F22) X 1

Standard Accessories : Soft Carrying Case, Manual, TP-01 Temperature Probe, Carry Hook

Dimension : 192(H) x 83(W) x 95(D)mm

• 3½ Digit Display
• 1,999 Count
• Full Protection function, capacitor with the function of Self discharge
• Auto Power Off (APO)

• Low Battery Indication Approx. <7.5V
• Sampling Rate 3 times per second
• Capacitance discharge protection 
• Power 9V (6F22) x 1

Standard Accessories : Soft Carrying Case, Test Lead, Manual

Dimension : 185(H) x 93(W) x 35(D)mm

• MEASURE EARTH VOLTAGE AND PERMITS EARTH RESISTANCE TEST
• 3½ DIGIT
• 1,999 COUNT
• LCD DISPLAY
• EXTERNAL POWER INPUT TERMINAL
• PORTABLE
• LOW BATTERY INDICATION
• OVER RANGE INDICATION

Power : 14500 RECHARGEABLE BATTERY x 4 PCS
SAFETY STANDARD : IEC 1010-1 (EN61010-1)
Dimension : H163 x W100 x D50 mm
Weight : Approx. 410 Gms.
Accessories : Soft Carrying Case, Calibration Certificate, 14500 Rechargeable Battery x 4 Pcs. 18V Adaptor, Instruction Manual

• Ground resistance test, loop resistance test, AC current test, AC voltage test
• Clamp Size 68mm
• Display 2.4 inches color LCD screen
• Measure Time 1 time/sec
• Data Storage Maximum 500 groups of data, display “FULL” symbol to indicate that the storage is full
• Auto Power Off (APO)
• Spare 1 & 10 Test Ring to detect Self Protection

POWER: 3.7V Lithium X 1

Standard Accessories : Test line 4 pcs, Single test time 2 pcs Hard Carrying, Manual,Test loop

Dimension : 273(H) x 106(W) x 53(D)mm

• 3 Selectable Sensitivity (High/ Medium / Low)
• Buzzer Alarm
• Auto Power Off (APO 5 Min)

Power : AAA 1.5 V X 3

Standard Acessories : Manual, Soft Carry Case

Dimension : 142 (H)X 58(W) X 28(D) mm

• Data Hold
• Max/Min
• Back Light
• Lux / FC Measurment
• Spectral range 320 ~ 730nm
• Auto Power Off (APO 10 Min)

Power : AAA 1.5 V X 3

Standard Accesories : Manual, Soft Carry Case

Dimension : 138 (H) X 56(W) X 25(D) mm

• Ambient temperature, Dew point temperature & Wet bulb temperature Fast Response Time
• Large-screen LCD and backlight
• Auto Power Off (APO)
• 99 groups Data Logging.

POWER : AA 1.5V X 3

Standard Accessories : Hard Carrying Case, Manual

Dimension : 184(H) x 60(W) x 29(D)mm

• Psi / in H2O / Mbar
• 11 Pressure Ranges
• Auto Pressure Off (APO)
• Backlight LCD

Power : 9V (6F22) X 1

Standard Accessories : Soft Carrying Case, Soft Tube, 2 Pcs, Manual, Soft
/ Hard Tube 2 Pcs, Metal Gas Mouth 2 Pcs

Dimension : 140(H) x 20(W) x 50(D)

• Psi / in H2O / Mbar
• 11 Pressure Ranges
• Auto Pressure Off (APO)
• Backlight LCD

Power : 9V (6F22) X 1

Standard Accessories : Soft Carrying Case, Soft Tube, 2 Pcs, Manual, Soft
/ Hard Tube 2 Pcs, Metal Gas Mouth 2 Pcs

Dimension : 140(H) x 20(W) x 50(D)

• Psi / in H2O / Mbar
• 11 Pressure Ranges
• Auto Pressure Off (APO)
• Backlight LCD

Power : 9V (6F22) X 1

Standard Accessories : Soft Carrying Case, Soft Tube, 2 Pcs, Manual, Soft
/ Hard Tube 2 Pcs, Metal Gas Mouth 2 Pcs

Dimension : 140(H) x 20(W) x 50(D)

• Psi / in H2O / Mbar
• 11 Pressure Ranges
• Auto Pressure Off (APO)
• Backlight LCD

Power : 9V (6F22) X 1

Standard Accessories : Soft Carrying Case, Soft Tube, 2 Pcs, Manual, Soft
/ Hard Tube 2 Pcs, Metal Gas Mouth 2 Pcs

Dimension : 140(H) x 20(W) x 50(D)

• Psi / in H2O / Mbar
• 11 Pressure Ranges
• Auto Pressure Off (APO)
• Backlight LCD

Power : 9V (6F22) X 1

Standard Accessories : Soft Carrying Case, Soft Tube, 2 Pcs, Manual, Soft
/ Hard Tube 2 Pcs, Metal Gas Mouth 2 Pcs

Dimension : 140(H) x 20(W) x 50(D)

• arge Dual LCD with backlight
• Data hold
• Max./Min. Average value with relative time stamp
• Zero adjust, offset & Different function
• Auto Power Off
• Low battery indication
• USB Computer Interface
  (Advanced Software program for all windows)
• Power : 9V (6F22) X 1

• Large Dual LCD with backlight
• Data hold
• Max./Min. Average value with relative time stamp
• Zero adjust, offset & Different function
• Auto Power Off
• Low battery indication
• USB Computer Interface
  (Advanced Software program for all windows)
• Power : 9V (6F22) X 1

Baker-Plunger Dial Gauge - MODEL 56:

MODEL 56 Plunger Dial Gauge Range 0.8mm to 30mm / 0.08" to 1", Range 0.8mm/0.08inch, One revolution dial gauge. Shock proof, Hardened stem for free clamping, Rigid brass case.

FEATURES

• Specification: IS, DIN, ANSI & JIS
• Every plunger dial gauge carries a calibration certification giving actual values
• Hardened stem for trouble free clamping
• Spindle made of stainless steel
• Fitted with tungsten carbide ball anvil
• Rigid brass case for increased rigidity
• Strong and smooth metal bezel
• Supplied with tolerance pointers
• Aesthetically appealing protective top cap in black color
• Special dial Gauges for OEMs also manufactured on request
• Complete spares and after sales service available
• 0.001mm x 1mm dial gauge fitted with 8 jewels and conforms to JIS B-7503