Instruhub

• 3½ DIGIT MANUAL MULTIMETER
• 1,999 COUNT
• TRUE RMS
• AUTO POWER OFF
• hFE TEST
• LIVE WIRE RECOGNITION
• LIVE REMOTE CONTROL TESTING
• FULL OVERLOAD PROTECTION

POWER: AA1.5V x 2
Dimension: H170 x W85 x D38 mm
Weight: Approx 180 Gms.
Accessories: Test leads, User Manual & Battery.

• 3000 A
• 5,999 Count
• SMART AC Digital Flexible Clamp.
• Ø 75mm.
• Clamp Torch with Backlight

POWER : AAA 1.5V X 3

Standard Accessories : Soft Carrying Case, Test Lead, Manual

Dimension : 324(H) x 178(W) x 30(D)mm

• Small angle X-ray Scattering studies on 1.8 m x 0.9 m footprint

• Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
• Pull Rate Indicator to manually monitor and adjust the rate of pull

Features:

There are two models available. The model AT-A Automatic Pull-Off Adhesion Tester and Model AT manual version. Both models have the following features:

• Portable, hand-operated instrument can be used in any position and requires no external power source-ideal for the lab and on-site
• Large scale reads clearly and easily in PSI and MPa
• Inexpensive, single-use dollies eliminate the need for heating, cleaning, or brushing for re-use
• Self-aligning dolly enables measurement on smooth or uneven surfaces without adversely affecting the test results.
• Heavy-duty hydraulic pump with safety valve helps prevent damage to pressure system
• Quick-coupling makes securing dollies in actuator simple, fast and trouble-free
• Multi-purpose, high-tensile two-part adhesive suitable for use with a wide variety of coatings and coating thicknesses
• Cutting tool for isolating test area is included
• Coating adhesion tester pressure system is calibrated and certified to ±1 % accuracy (full-scale) and comes with a two-year warranty
• Internal memory stores up to 200 pulls. This includes maximum pull-off pressure, rate of pull, test duration, and dolly size
• Optional PosiSoft software available to upload test results
• USB Port PC interface
• 10, 14, 20, and 50mm dollies to maximize the measurement resolution and test range

• Adhesion Strength

0 - 20 MPa

• Adhesion Strength

0 - 3000 psi

• Resolution

± 1.0 psi

• Resolution

± 0.01 MPa

• Dolly Size

20 mm

General

• Weight

5.5 kg

• Weight

12 lb

• Dimensions: L x W x H

43 x 33 x 15 cm

• Dimensions: L x W x H

17 x 13 x 6 in

Standards:

ISO

4624 16276-1

ASTM

D4541 D7234

It conforms to international standards including ASTM D4541, D7234; ISO 4624, 16276-1; AS/NZS 1580.408.5 and others.

Product Details:

1. With Brinell, Rockwell and Vickers test methods, more hardness scale selection.
2. Electric loading, high precision sensor, with a unique closed-loop control system
3. Eyepiece structure with digital encoder, measure D1, D2 value, LCD display hardness value and D1, D2 value directly.
4. The test force is automatically corrected, each force is automatically compensated, and the accuracy of the force is improved by an order of magnitude.
5. Can be calibrated according to the standard hardness block or length scale.
6. Test force can be automatically corrected by standard dynamometer
7. The hardness value of rockwell and vickers can be converted.
8. Touch screen, easy to operate.
9. According to the national standard /ASTM hardness automatic conversion.
10. Technical specification：

• Measure Accelerator / Velocity / Displacement with RPM & Frequency
• Metric / Imperial Measurement
• AC output socket for headphones and recording
• Optional Headphones for use as electronic stethoscope
• Optional RS-232 Communication (Advanced Software Program for all windows)

POWER : AAA 1.5V X 4

Standard Accessories : Magnet, Accelerometer, Stinger Probe (Cone), Stinger Probe (Ball) , Hard Carrying Case, Manual

Optical Accessories : HTC Software with RS-232 USB Cable

Dimension : 124(H) x 62(W) x 30(D)mm

• Data Hold
• Auto Power Off (APO)
• Peak Hold (LX-102A)

Standard Accessories: Soft Carrying Case, Manual

Dimension: Photo Detector: 100(H) x 60(W) x 27(D)mm
130(H) x 95(W) x 30(D)mm

• Large Range upto 1,00,000 LUX
• Large LCD Display with Backlight & Bar Graph
• Auto Power Off (APO)
• Data Hold & Max/Min

Standard Accessories: Soft Carrying Case, Manual

Dimension: 184(H) x 60(W) x 29(D)mm

Power : AA 1.5V X 2 (UM-3) or 6V DC

Surrounding : No Vibration Source of Corrosive Medium Around

Dimension : 211(H) x 80(W) x 36(D)mm

Power : AA 1.5V X 2 (UM-3) or 6V DC

Surrounding : No Vibration Source of Corrosive Medium Around

Dimension : 211(H) x 80(W) x 36(D)mm

The new Automatic Pull Off Adhesion Tester now features impressive smart technology. Still simple to use, durable and versatile the ‘AT-A’ Automatic Adhesion Tester measures with ease and precision the adhesion bond strength of applied coatings to metal, wood, concrete and other rigid substrates.

The adhesion bond strength is measured by the tensile pull on a dolly glued to the coating surface. The force is applied through the centre of the dolly by hydraulically loaded pin ensuring an exact central point loading of the force. Adhesion values are recorded by a pressure gauge giving a 1:1 pressure reading.

• SHOCKPROOF DIAL INDICATOR 
• MADE OF STAINLESS STEEL

The INSIZE 2396-25A Metric Dial Indicator Tester has the following specifications:

• Range: 0-25mm
• Sampling interval: 0.1mm
• Accuracy: 4µm (0-25mm), 3µm (0-10mm), 2µm (0-1mm)
• Accuracy 1: ±5%
• Hysteresis: 1µm
• Range 1: 0-1.6N
• Graduation: 0.05N
• Diameter: 50mm
• Flatness: 1µm
• Roughness: 0.05µm

Features:

• To calibrate dial indicators, test indicators and dial bore gages
• Dimension: 270x210x205mm
• Weight: 11kg

The INSIZE 2189-30 Metric Keyway Depth Gage has the following specifications:

• Range: 0-30mm
• Graduation: 0.01mm
• Accuracy: ±0.03mm

Features:

• Measure keyway depth of cylindrical workpieces with diameter 10-100mm
• Stainless steel base
• Pointed tip

• X Axis Measuring Range: 140mm
• X Axis Resolution: 0.2um
• X Axis Traverse Speed: 0.05-15mm/s
• Z Axis Measuring Range: 50mm
• Z Axis Resolution: 0.05um
• Z Axis Traverse Speed: 0.5um/100mm
• Straightness: 0.5um/100mm
• Linear Accuracy: (0.8+|0.15H)um, h is measuring height in mm
• Angular Measuring Accuracy: 1′
• Arc Measuring Accuracy: +/-(1.5R/12)um, R is 2-10mm standard ball
• Measuring Unit: um/uin
• Measuring Speed: 0.05-1mm/s
• Travel Of Z Axis: 430mm
• Dimensions of Machine: 55.1 x 33.5 x 70.0″
• Weight: 771lbs

Features:

• Software is included, for measurement and data output
• Profile sensor with low noise
• Wide range roughness sensor without skid
• Meet lSO1997, lSO1984, BS1988, DlN1990, ASME1995, J|S1982, J|S1994 standards
• 65 roughness parameters

Power : AAA 1.5v x 4

Standard Accessories : Sensor Probe, Hard Carrying Case, Manual

Optical Accessories : HTC Software with RS-232 USB Cable

Dimension : 156(H) x 67(W) x 28(D)mm Sensor Head -72mm Dia

Technical Data

AIR VELOCITY

 AIR FLOW

 Special Function

• 20, 60 and 85° angle in one instrument
• Universal application from high to low gloss

Features:

• 20, 60 and 85° in one: from high to low gloss - have the specified angle on hand
• For any material: paint, plastic or even mirror-like metals
• All angles measure at the same location, and the results appear simultaneously
• Intelligent gloss measurement with smart communication
• Excellent repeatability and inter-instrument agreement guaranteed
• Intelligent auto diagnosis guarantees always accurate readings
• Brilliant color display easy to read - easy to use
• Statistics, Pass/Fail and Memory - ideal for QC and checks in the field
• Continuous mode to check uniformity over large areas
• smart-chart software: instant QC reports with trend graph and Pass/Fail limits

Technical Specifications:

• Geometry

20°, 60°, 85°

• Application

universal

• Measuring Area

20°:  10 x 10 mm

60°:  9 x 15 mm

85°:  5 x 38 mm

• Measuring Area

20°:  0.4 x 0.4 in

60°:  0.35 x 0.6 in

85°:  0.2 x 1.5 in

Gloss Measurement

• Measuring Range

20°:  0 - 2000 GU

60°:  0 - 1000 GU

85°:  0 - 160 GU

• Repeatability

0 - 100 GU:  ± 0.2 GU

100 - 2000 GU:  ± 0.2 %

• Reproducibility

0 - 100 GU:  ± 0.5 GU

100 - 2000 GU:  ± 0.5 %

• Spectral sensitivity

CIE standard observer for illuminant CIE-C

General

• Measuring time

0.5 seconds / geometry

• Memory

999 readings with date and time

• Interface

USB

• Languages

English French German Italian Spanish

• Power supply

one 1.5V AA Alkaline Battery, or via USB-port

• Battery Capacity

4,000 readings

• Weight

0.4 kg

• Weight

0.9 lb

• Operating temperature

15 - 40 °C

• Operating temperature

60 - 104 °F

• Relative humidity

up to 85 %, non-condensing

• Dimensions: L x W x H

15.5 x 4.8 x 7.3 cm

• Dimensions: L x W x H

6.1 x 1.9 x 2.9 in

Standards:

ISO

2813 7668

ASTM

D523 D2457

JIS

Z 8741

DIN

67530

IEC Test Equipment -Test finger probe-Diameter 50mm Test Probe Made of Stainless Steel and Nylon, Accord with IEC60529 IP1​

 
Product Description:

Product Name:    Test Probe A       

Material:              Plastic + Stainless Steel

Color:    White   

Lead Time:          Within Very Short Time

Standards:            IEC61032, IEC60529       

Baffle Plate Diameter:       45mm

Product introduction: 
This probe made of stainless steel and nylon, the sphere made of stainless steel, the baffle and handle made of nylon. The diameter of sphere is 50mm. Baffle diameter is 45mm. Baffle thickness is 4 mm. Handle diameter is 10mm. Handle length is 100mm. It has no force, but there is an M6 threaded hole at the end of the handle to connect the push-pull meter.

 
Standard:
IEC61032, IEC60529 IP1 and IEC60065.

Application:
This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe used to prevent the hazardous parts and solid foreign objects from entering.

Test sample:
Easily accessible enclosure live parts or mechanical parts.

Feature:
This test probe can be customized. It can be used for anti-electric shock test when equipped with Amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).

Parameters:

TECLOCK-Pocket Type:

Durometer of pocket type it is convenient to carry.\

Model:

• GS-719P

Type A

Application / Materials: General rubber (Medium hardness)

Weight:100g

• GS-709P

Type A

Application / Materials: Soft plastic, General rubber

Weight:100g

• GS-755

Type OOO

Application / Materials: Ultora soft rubber

Weight:125g

• GS-779G

Type A approximate

Application / Materials: Thin Sheet Hardness

Weight:100g

BZ-7233

Perform sound intensity measurements for noise source location, sound power determination, and noise mapping using a Type 2270 sound level meter.

This sound level meter software for Type 2270 is usually used together with a sound intensity probe, to assess sound levels and give instant results. This system makes it easy for one person to perform a sound intensity measurement from beginning to end. By scanning the object, you can get on-the-spot noise source identification results – including a noise map – on the sound level meter’s colour screen. Export data to PC for further analysis such as advanced noise mapping.

The software and equipment fulfils all relevant IEC standards, and enables measurements that meet ISO, ANSI and ECMA standards.

• Sound power characterization and sound source mapping on industrial goods such as pumps and ventilation units
• Building acoustics evaluations, such as flanking transmission path investigations
• Sound intensity mapping of electroacoustic devices and consumer products such as loudspeaker cabinets and white goods
• Measuring in situ sound emissions of products in inaccessible places, such as rooftop extractor fans
• Measurements for noise labelling of products for EU machine directives

Automatic measurement guidance and aural feedback during measurements allow you to concentrate on making a smooth scan of the area under investigation. Clear measurement quality indicators confirm your data validity, giving results you can use on the spot. To help make sense of the measurements later, after exporting data to a PC, you can make notes using text input, voice comments, and photos of the measurement object – using the sound level meter’s camera. A number map showing the source strength can be superimposed on a photo of the object being measured, showing sound intensity contours.

The hand-held sound intensity system for Type 2270-S includes a weatherproof carrying case housing the hand-held analyzer, a probe with a windscreen, an extension stem with a handle, an intensity adaptor for Sound Calibrator Type 4231, a tape measure, and earphones. The case can also house optional accessories such as a sound calibrator, sound intensity calibrator and spare batteries.

• Portable and battery powered for in-field measuring projects
• 1/n-octave analysis
• Visual data manager keeps track of measurements and data
• Export data to mapping software
• Sound intensity measurements to IEC 61043
• Sound power determination compliant with ISO 9614–1, ISO 9614–2, ANSI S12.12, ECMA 160
• Sound intensity probe can use either ¼” or ½” microphones
• Includes software for archiving, reporting and exporting results
• Generator output for transmission loss measurements
• A unique phase-calibration technique lets you make all your measurements with a 12 mm spacer between the two microphones, covering 50 Hz to 10 kHz

• A signal recording option is available to help document measurements
• Export to Acoustic Test Consultant Type 7761 for noise contour mapping
• Export to Microsoft Excel for sound power calculation

TYPE 7882

For determining sound power of a product during normal operation in any sound field, by measuring sound intensity to ISO standards.

This PULSE software determines the noise levels of products by measuring their sound intensity with a hand-held sound intensity probe. The user measures the sound on a flat, virtual surface on every side of the test object, at a very close distance. Because the acoustic measurements are so close to the source, the sound intensity technique can easily work despite background noise. This makes it ideal where the sound field is neither free nor reverberant, for in situ measurements, and where background noise prevents sound pressure-based measurements.

The software helps the user measure sound power using measurement methods that fulfill the standards ISO 9614–1, ISO 9614–2 and ISO 9614–3.

• Developing quieter products
• Determining product compliance with noise specifications for legislation or voluntary awards such as Germany’s Blue Angel
• Comparing noise emissions of machinery and equipment for benchmarking
• Locating and ranking noise sources

This PULSE software is an application template designed for easy determination of sound power using sound intensity. A dedicated user interface for each ISO standard has a clear task list that leads you through all the necessary steps to fulfil the requirements. Features, such as pop-up text and colour coding give quick updates on measurement status, and the software displays clear warnings if information is missing or does not follow the requirements. Based on the results, actions are suggested to attain the desired level of accuracy. The operator can check the health and readiness of all channels simultaneously with one click, using charge injection calibration (CIC). Users need minimal training, which makes it easy to use the system alone.

For each of the flat surfaces around the test object, the software averages the sound intensity and measures the sound pressure, pressure-residual intensity index, and the dynamic capability index. The user can easily add new planar surfaces, and segment previously defined surfaces up to seven times to obtain the desired accuracy. With this technique it is possible to locate and rank noise sources for each measurement surface.

• High-frequency corrections to intensity spectra to enable measurements at 6.3 kHz, 8 kHz and 10 kHz 1/3-octave bands
• ISO 9614–1 uses sound intensity measurements at discrete points 
• ISO 9614–2 uses sound intensity measurements with a scanning method 
• ISO 9614–3 uses a precision sound intensity scanning method
• Data and results saved to Microsoft® Excel® for customized reporting and further post-processing
• Allows users to skip repetitive tasks

Elcometer 224 Digital Surface Profile Gauge:


The Elcometer 224 provides the very latest in surface profile measuring technology for measuring profile on either flat or curved surfaces.

User friendly and precise equipment, Elcometer 224 Surface Profile Guage is available with or Without memory and Bluetooth features.

There are two types of Surface profile Meter:

1. Model B - Entry level Elcometer 224 Model B
2. Model T – Top Range Elcometer 224 Model T with memory, Bluetooth and alphanumeric batching.

Features:

1. Ergonomic design for comfort during continuous use
2. Integral or separate probes measure profiles up to 500μm (20mils) on flat or curved surfaces1
3. 2.4” colour screen provides enhanced reading visibility at all angles

Application:

Coating Inspection, & Surface Profile

Baker- Portable Surface Roughness Tester:

BAKER SRT100 is a mobile, lightweight, and extremely easy to use surface roughness measurement instrument. It is designed as a handheld instrument that can be used on site.

FEATURES:

• Ergonomic design, small size, light weight, easy to operate.
• The stylus drive unit can be fitted in the main unit for standard measurement, or separated from the display unit, which allows more flexible measurement in any orientation.
• Complies with standards ISO, DIN, ANSI, JIS.
• 22 roughness Parameters
• 3.5 inch colour graphic TFT touch screen provides wide viewing angle, excellent readability and intuitive display that is easy to navigate.
• Bluetooth capability; supports wireless connection with mobile and mini printer.
• Built-in lithium battery, working time over 50 hours.
• Power-saving features as auto sleep & auto power off.
• Large capacity data storage; storage of 100 items of raw data and measured profiles.

Standard Configuration

SRT100 Main unit        1 Set

Sensor Drive

Standard Sensor

Calibration block and bracket

Height adapter

Power adapter

Operating manual

Duramin-650 Semi-Automatic and Fully Automatic Universal Hardness Tester:

Duramin-650 is the universal hardness tester suited for laboratory use. Each model in the range has a motorized test head and turret, and is available either with a fixed anvil or with a motorized XY-stage and overview camera, primarily suitable for high volume testing. Duramin-650 is available in three load ranges. Should be in perfect working height, automatic protection & exchange of indenter and lens.

Features:

Benefits:

Mostly Used in following industries:

Application:

Vickers, Knoop, Brinell, Rockwell, HVT/HVB

TECLOCK- Dial Depth Gauge:

• Dial Depth Gauge can be used to measure depth and steps of work piece and coating thickness.

• 5-240mm range (with the supplied extension rods) are available for wide application.

• Special order is applicable for contact point and base.

• Low measuring force type is also available, which seldom hurts work piece.

• Lifting lever (Option) can be mounted.

Models:

       I.          Measuring Range:10mm:

·        DM-210

Needle Contact Point

·        DM-211

φ2 Flat Contact Point

·        DM-213

φ2 Ball Contact Point

·Extension rods options

·        DM-214

Possible depth measurement of up to 220mm

with 5-Extension rods

     II.          Measuring Range:5mm:

·        DM-250

Small type

   III.          Measuring Range:20mm:

·        DM-220

Needle Contact Point

·        DM-221

φ2 Flat Contact Point

·        DM-223

φ2 Ball Contact Point

·        DM-224

Possible depth measurement of up to 230mm

with 5-Extension rods

   IV.          Measuring Range:30mm:

·        DM-230

Needle Contact Point

·        DM-233

Possible depth measurement of up to 240mm

with 5-Extension rods

·        DM-234

Possible depth measurement of up to 240mm

with 5-Extension rods

     V.          Measuring Range:50mm:

• A large sized depth gauge measurable 0-50mm (actual dimension) depth directly without any extension rod.

• The dial part is a type movable by inserting it into one of 3 holes.

·     
   DM-295

Base Length 150mm

Baker- Dial Depth Gauge:

FEATURES:

· Every gauge carries a calibration certificate giving actual values

· Suitable for quick and easy measurements of depths.

· Base with 80 mm length: hardened and ground to a high degree of flatness

· Supplied with a set of extension rods

· Supplied with Tungsten Carbide contact point for longer life

Technical info:

Metric

Inch

Digital

ANSI (AGD)

• esolution 0.001mm/0.00005″
• Button function: on/off, set, mm/inch, ABS/INC.
• Data output, automatic power off.
• Carbide measuring faces.
• Friction thimble.
• Supplied with spherical anvil.
• Setting standards are included (except 0-25mm/0-1″)
• Optional accessory: data output cable (code 7315-30, 7302-30)

• OUTSIDE MICROMETERS ARE USED FOR MEASURING THE THICKNESS OR OUTSIDE DIAMETER OF SMALL COMPONENTS
• ADDITIONAL COUNTER FOR EASY READING
• MEASURING RANGE 0-25MM
• COUNTER GRADUATION: 0.01MM
• THIMBLE GRADUATION: 0.01MM
• CARBIDE MEASURING FACES
• RATCHET STOP
• MEET DIN863-1

• OUTSIDE TUBE MICROMETERS ARE USED FOR MEASURING THE THICKNESS OR OUTSIDE DIAMETER OF ROUND OR SPHERICAL COMPONENTS.
• MEASURE WALL THICKNESS OF TUBES.
• GRADUATION: 0.01MM.
• CARBIDE MEASURING FACES.
• RATCHET STOP.
• MEET DIN863-3.
• SINGLE BALL.

• Graduation 0.01mm.
• Ratchet stop.
• Carbide measuring faces.
• Attention: Low parallelism of two measuring faces.

·         Carbide measuring faces

·         LR44 battery automatic power off

·         Ratchet stop

·         Resolution 0.001mm/0.00005''

·         Button function : on/ off , set / mm/inch, ABS/INC

·         Data output 

·         Setting ring included

·         Optional accessory : data output cable (code 7315-30, 7302-30)

·         Attention: low parallelism of two measuring faces 

FEATURES:

TECLOCK-Pocket Type:

Durometer of pocket type it is convenient to carry.\

Model:

• GS-719P

Type A

Application / Materials: General rubber (Medium hardness)

Weight:100g

• GS-709P

Type A

Application / Materials: Soft plastic, General rubber

Weight:100g

• GS-755

Type OOO

Application / Materials: Ultora soft rubber

Weight:125g

• GS-779G

Type A approximate

Application / Materials: Thin Sheet Hardness

Weight:100g

• Jaw Length: 150mm
• Fine adjustment
• Made of stainless steel.
• Satin chrome plated reading surface.100

Lutron DT-2240D Panel Tachometer

Specification
Display :14.3 mm (0.56") high brightness red red LED. 4 digits., max. display 9999.
Signal input :One round per input signal to get RPM resolution ( recommend to match optional proximity sensor, PX-01 ).
Range :5 to 9,9990 RPM
Resolution :0.1 RPM ( 5 to 999 RPM ).
1 RPM ( 1000 to 9,999 RPM ).
10 RPM ( over 10,000 RPM ).
Accuracy :± (0.05% + 1 d).
Sampling time :1 sec. over 60 RPM.
Range select :Automatic. when measuring value over 9999 RPM. display will show " x 10 " LED indicator.
Operating temp. :0 to 50 ℃ (32 to 122℉)
Operating humidity :Less than 80% RH.
Power supply :AC 110V,220V, 50/60 Hz ( or 230V internal adjustment ).
Power consumption :Approx. AC 16 mA ( AC 110V power).
Approx. AC 9 mA ( AC 220V/230 power).

Proximity Sensor
Specification
Application :Optional sensor for DT-2240D.
Power supply :DC 12V to 24 V.
Detectable object :Metal object (fenous material).
Detecting distance :4 mm.
Response time :600 Hz, max.
Power consumption :Approx. 10 mA.
Cable length :1 meter.

Photo Sensor
* Photo sensor for Panel Tachometer DT-2240D
* Power supply : DC 12 V to 30 V.
* 3 wires : Power, Signal & Ground.

We do undertake Servicing and repairing of Lutron DT-2240D Panel Tachometer lutron Range of products throughout india

Apart from supplying lutron Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are lutron Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Lutron DT-2240D Panel Tachometer Products in Chennai, Assam, Madurai, Coimbatore, Nagaland, Kerala, Manipur, Mizoram, Haryana, Sikkim, VIsakhapatnam, Tirchy, Hosur, Anjaw, Tumkur, Mysore, Kolkatta, Salem, Poonamalle and etc..

Temperature Chamber For Charge-Discharge Testing

Overview of Equipment

Safe environmental test

This leaflet is to introduce safety features that could be added to our chambers not only based on our experience but also based on the EUCAR Hazard Level.
we describe recommended safety features needed in the event of an abnormality in the secondary battery during tests. To ensure the safety of surrounding workers and installation site, we suggest adding safety features according to the EUCAR (European Council for Automotive R&D) Hazard Level.
Please examine the characteristics of the sample and the test contents under the severe environmental testing carefully before selecting the appropriate option.
The safety features can be adapted individually, according to customer specifications.
Please contact us for more detailed information.

EUCAR Hazard Levels

Dedicated chamber for safe battery charge-discharge testing.

Charging and discharging tests of batteries, such as lithium-ion batteries, are important tests to evaluate the life of batteries.
During the test, there is a possibility of gas leakage from the battery, ignition, smoking, or destruction. It is necessary to protect people, samples, test equipment, and the laboratory from such hazardous situations. BTC's chambers are equipped with safety devices proven in battery explosion tests to provide optimal protection against such hazards. Designed with safety as a top priority, the BTC is already equipped with a large, reusable pressure relief vent that safely relieves pressure in the event of a battery explosion. Safety devices can also be selected and added as needed. This safe and environmentally friendly tester will strongly support your testing.

Provides optimal layout

In battery charging and discharging tests, the layout of the laboratory needs to be determined with the wiring to the battery cells in mind.
Efficient wiring to the battery cells will increase the safety of the experimental area and save space.