Instruhub

ViscoQC 100 R

ViscoQC 100 R

• Single-point measurements on 3.5” color display
• Viscosity range from 6.4 mPa.s to 40,000,000 mPa.s
• 6 RH spindles to measure medium-viscosity samples (e.g. paints, dairy products, and more)

KEY FEATURES:

The easiest way to measure dynamic viscosity

You don’t need to be an expert to measure with ViscoQC. Anton Paar’s viscometers guide you from start-up through the entire measurement process via an intuitive user interface. Continue to use the standard operating procedure methods of your existing rotational viscometer: ViscoQC uses the same instrument setup and measuring settings to deliver the same results. Each spindle is equipped with magnetic coupling for easy spindle exchange, saving you up to 15 seconds per test. The coupling also reduces maintenance costs by protecting the spindle and instrument against damage caused by knocks or bending. All spindles from Anton Paar are made of chemically resistant stainless steel (AISI 316L), which increases spindle lifetime by protecting them from corrosion.

Standards Applicable

ASTM D115 , ASTM D789, ASTM D1076, ASTM D1084, ASTM D1337, ASTM D1338, ASTM D1417, ASTM D1439, ASTM D1824,

ASTM D2196, ASTM D2243, ASTM D2364, ASTM D2556, ASTM D3288, ASTM D3468, ASTM D3716, ASTM D3730, ASTM D3794

ASTM D4016, ASTM D4143, ASTM D4300, ASTM D4878, ASTM D4889, ASTM D5324, ASTM D5400, ASTM D6279, ASTM D6577

ASTM D7394, ASTM D8020, E2975, E3070, E3116, F1607, F3208

BS5350

Chinese Pharmacopoeia (ChP) - 0633 Rotational viscosity measurement method, method III

DIN 2555, DIN 3219, DIN 16945, DIN 52007-1, DIN 53019-1, DIN 54453

EN 302-7, EN 2555, EN 3219, EN 10301, EN 12092, EN 12802, EN 15425, EN 15564,

ISO 1652

ISO 2535

ISO 2555

ISO 3219

ISO 10364-12

Japanese Pharmacopoeia (JP) - XVII 2.53 (2.1.2) Single cylinder-type rotational viscometer Pharmacopoeia Europe (Ph. Eur.) - 2.2.10 - Rotating viscometer method

TAPPI - T648

TAPPI - T697

TECHNICAL SPECIFICATION

 

Model: ViscoQC 100 H

• Single-point measurements on 3.5” color display
• Viscosity range from 51.2 mPa.s to 320,000,000 mPa.s
• 6 RH spindles to measure high-viscosity samples (e.g. ointments, sauces, and more)

KEY FEATURES:

Full traceability for reliable viscosity tests

ViscoQC instantly detects and documents the measuring setup of the following parts:

• Spindles by Toolmaster™ and spindle guard by TruGuard™
• Temperature devices and sensors (PTD 80, PTD 175, Pt100)
• Heli-Plus motorized accessory
• PTD 100 Cone-Plate accessory

To ensure correct viscosity results, all spindle data is automatically delivered to the viscometer as soon as the spindle is attached. With ViscoQC 300, Toolmaster™ further restricts each method to a unique spindle identity. No time is wasted with repeat measurements (e.g., if the wrong spindle is mistakenly chosen from the spindle list). If you need to measure new formulations, ViscoQC automatically leads you to the right spindle/speed configuration using TruMode™.

Standards Applicable

ASTM D115 , ASTM D789, ASTM D1076, ASTM D1084, ASTM D1337, ASTM D1338, ASTM D1417, ASTM D1439, ASTM D1824,

ASTM D2196, ASTM D2243, ASTM D2364, ASTM D2556, ASTM D3288, ASTM D3468, ASTM D3716, ASTM D3730, ASTM D3794

ASTM D4016, ASTM D4143, ASTM D4300, ASTM D4878, ASTM D4889, ASTM D5324, ASTM D5400, ASTM D6279, ASTM D6577

ASTM D7394, ASTM D8020, E2975, E3070, E3116, F1607, F3208

 BS5350
Chinese Pharmacopoeia (ChP) - 0633 Rotational viscosity measurement method, method III

DIN 2555, DIN 3219, DIN 16945, DIN 52007-1, DIN 53019-1, DIN 54453

EN 302-7, EN 2555, EN 3219, EN 10301, EN 12092, EN 12802, EN 15425, EN 15564,

ISO 1652

ISO 2535

ISO 2555

ISO 3219

ISO 10364-12

Japanese Pharmacopoeia (JP) - XVII 2.53 (2.1.2) Single cylinder-type rotational viscometer

 Pharmacopoeia Europe (Ph. Eur.) - 2.2.10 - Rotating viscometer method

 TAPPI - T648

TAPPI - T697

TECHNICAL SPECIFICATION


 

 

Rotational Viscometer, Premium Models:

byko-visc RT L
Rotational Viscometer - premium model for low viscosity-

• Measuring Range in cP: 4 - 6 Mio.
• Speed range (RPM): 0.1 to 250
• No. of speeds: Freely selectable within speeds range
• 4 Spindles included
• Viscosity ranges of L-spindles defined by instrument sensitivity and speed range:
  • Spindle L1 4 - 60 000 cP
  • Spindle L2 18 - 300 000 cP
  • Spindle L3 72 - 1.2 Mio. cP
  • Spindle L4 360 - 6 Mio. cP

Features:

As a manufacturer, viscosity specifications need to be developed and defined by R&D for the products used in specific conditions – often customization of recipes is required. To ensure a stable viscosity performance in production tests need to be run daily. The new byko-visc RT provides you all the flexibility needed for any measurement task.

• Spindle set made of high quality 316 stainless steel
• Quick disconnect spindles with an easy snap-on attachment
• Intuitive 5” Color touch screen 800 x 600
• Multi-point tests
• Data display: Advanced data collection with on-screen graphing
• Test Mode: Time to Torque, Time to stop, QC limits, Ramp of speeds, Curve Fitting
• Dymo Label Writer output for sample labeling
• Electronic bubble leveling w/adjustable feet
• USB memory stick / direct to PC connecting
• Temperature probe included
• CE/UL/CSA Approved
• 17025 certificate included

Technical Specifications:

• Viscosity Range

4 - 6000000 cP

• No. of Spindles

4

• Repeatability

0.2%

• Accuracy

1.0% full scale range

• Max Spring Torque

0.0673 mNm

General

• Languages

English German French Italian Spanish Russian Japanese Chinese

• Power supply

Worldwide power supply, 24v voltage DC input / Separate 24 VDC power supply

• Weight

6.5 kg

• Weight

14.3 lb

• Dimensions: L x W x H

25 x 31 x 47 cm

• Dimensions: L x W x H

9.8 x 12.2 x 18.5 in

Standards:

ISO

2555 1652

ASTM

D2196

Other Variations:

1)      8357
Rotational Viscometer - premium model for regular viscosity

byko-visc RT R

 

2)     8358
Rotational Viscometer - premium model for high viscosity

byko-visc RT H

Anton Paar-Ultrapyc 5000 Foam

·        Includes test methods and calculations of ASTM D6226 describing the open-cell content of foams

·        PowderProtect: Measure samples without instrument contamination

·        Built-in Peltier temperature control

·        Accurate results for samples from 4.5 cm3 to 135 cm3

Technical specifications

Technical Specification:

 

Desktop Software Requirements:

Ports

2 Ethernet ports with 1 GBPS (Gigabit Network)

USB Port (2.0 Min)

Thermofisher scientific- HAAKE Viscotester 3 Rotational Viscometer:

 

Perform viscosity measurements with ease.  The Thermo Scientific™ HAAKE™ Viscotester™ 3 rotational viscometer ensures quick, reliable tests for QC applications.

Use it as a handheld viscometer or on a lab stand. Color coding ensures measuring geometries match the analysis, the display is readable in any lighting, and the viscometer remembers the reference point measurement for you.  All that comes in a ready-to-go carrying case. 

 

Product Overview:

Designed for simplicity – The HAAKE Viscotester 3 Rotational Viscometer is built for ease of use to get you quickly to the right viscosity measurements:

·        Smart alignment given by design and visualized by an electronic level

·        Quick coupling of measuring geometries for fast and easy adaptation

·        Color coded geometries and a geometry range indicator ensure correct rotor selection every time

·        Adaptable display brightness ensures ideal readability in any environment

·        Battery and power supply options allow the viscometer to be run anywhere

·        Memory assist functionality allows you to quickly and easily compare measured viscosities with the reference point

·        Selectable viscosity units (mPa s or dPa s)

·        Compatibility with previous viscometer models

Recommended for: your entire process, from accepting the delivery of goods, to sampling during production and quality control (QC).

·        Printing inks, paints, inks and other coatings

·        Shampoos, creams, lotions, and similar personal care products

·        Oil, greases, pastes and similar substances

·        Sauces, thickeners, and similar food products

Specifications:

Description          HAAKE Viscotester 3 Rotational Viscometer for higher viscosity measurements

Includes Base viscometer comes in carrying case with instrument holder (for lab stand), one measuring cup (No. 3), three rotors (No. 1, 2 and 3), four rechargeable batteries and one power supply adapter. Easily upgrade your Thermo Scientific HAAKE Viscotester 2 Plus viscometer to this model; the results are compatible.

Measuring Accuracy         ± 5% FSD (rotors R1, R2, R3)

± 7.5% FSD (rotor R5)

± 10% FSD (rotor R4)

Power Supply      Operable by battery or power supply

Rotational Speed Range    62.5 rpm

Temperature Range (Metric)           Up to 150°C

Viscosity Range  30 to 400 000 mPas

Unit Size              Each

 Simultaneously measure rheological properties and changes in the microscopic structure of a sample with the Thermo Scientific™ RheoScope Module for the Thermo Scientific™ HAAKE™ MARS™ Rheometer platform. The results allow researchers to speed up formulation development, process optimization and product processability.

 
Product Overview:
The RheoScope Module for the HAAKE Mars Rheometer offers rheological measurements with optical analysis. It simultaneously measures rheological properties and changes in microscopic structure of tested samples. It consists of an optical microscope, digital video camera and temperature control unit used in conjunction with the MARS Rheometer. You can choose from standard and high temperature range versions.


The RheoScope Module for HAAKE MARS Rheometer Features:
·        Compact and full integration with the HAAKE MARS Rheometer platform
·        All measuring modes, including normal force measurement, available with simultaneous recording of microscopic properties
·        Camera and microscope control via supplied software
·        Simultaneous rheological and optical measurements
·        Visualization of data and images in one software package
·        Analysis of structural changes under shear
·        Image analysis software for determining particle sizes, particle size distribution and structure analysis.


Specifications:
Type      RheoScope Module
Camera  Black-and-white 'progressive' scan CCD camera, with 1024 x 768 pixels, C connector and IEEE 1394 (Firewire) interface
Data Storage        Up to 30 images per second in HAAKE RheoWin 4 software
Description          RheoScope Module for HAAKE MARS Rheometer platform
Field Depth          5 μm (20X lenses)
Lens       5X, 10X, 20X and 50X
Light Source        150 W, 12 V, Wavelength Range: 380 to 750 nm
Resolution           1 μm (20X lenses)
Unit Size              Each

Product Details:

Measures melt flow rate of polymers by detecting the shear rate and shear stress of melt polymer when it flows out of the capillary. Die swell and melt tension, etc. can also be measured by attaching optional attachments.

Features:

• Wide range of information such as melt flow curve (viscosity), die swell and melt strength can beobtained from this single machine.
• Zone control system used for controlling barrel’s temperature assures superb temperature distribution even in long barrels.
• Superb loading accuracy achieved by employing automatic (barrel free) system for aligning centers of the barrel and piston.
• Long barrel stroke permit measurement of maximum 19 points in one fill of sample.
• Movable barrel Very convenient for filling sample and cleaning by using air cylinder.
• Load cell is air-cooled type and incorporates an automatic overload stop circuit.
• The machine automatically stops when some abnormality occurs.
• Auto extrusion speed. By setting the push out speed to auto the speed automatically changes.
• The operations of temperature setting, reading out from the recorder, etc. are built into the computer.
• The data processing system allows multiplotting under up to 8 conditions including shear rate vs. viscosity, shear stress and die swell curves and temperature vs. viscosity, shear stress and die swell graphs.
• The system also permits processing of melt strength’s max. value, average value, limiting speed, capillary length correction coefficient (Ec) and Rabinowitsch correction. (Option)

Technical specifications

Technical specifications

Anton Paar- RheolabQC

·        Cost-effective modular rotational rheometer for routine tasks

·        From single-point to more complex rheological analyses from liquids to semi-solids

·        Controlled shear rate and shear stress, yield and thixotropic tests

·        Worry-free use with automatic spindle recognition (Toolmaster™)

Key features

·        Viscosity measurement  – From single point up to complex rheological tests
·        Quick and accurate temperature control
·        Ease of operation for single-point viscosity determinations as well as more 
         sophisticated rheological tests
·        A wide range of applications covered by only one rotational rheometer
·        A broad variety of measuring systems and accessories for a multitude of applications

 

Technical specifications

Ash-free Filter Papers for Quantitative and Gravimetric Analysis

Sartorius offers a full portfolio of quantitative filter papers, used for quantitative and gravimetric analyses as well as pressure or vacuum filtration. 

• Made of 100 % cotton linters
• Ash-free (Ash content < 0.01 % according to DIN 54370)
• Wet-strengthened
• Color-coded box for easy selection
• Supplied in sheet, disc, folded and customized formats

Green Dot Quantitative Filter Papers / Grade 390 / 580 x 580 mm Sheets

These 580 x 580 mm fast filtering, black dot filter paper sheets are used for quantitative and gravimetric analyses as well as for pressure or vacuum filtration. 

• Made of 100 % cotton linters
• Ash-free (ash content ≤ 0.01 % according to DIN 54370)
• Wet-strengthened
• Color-coded box for easy selection
• Slow filtering
• Narrow-pore
• 100 sheets per pack

Applications

·        Application

Clarification

·        Application Area

·        Analytical Sample Preparation

·        Particle Analysis

Dimensions

·        Dimensions

580 × 580 mm

·        Filter Diameter

N/A

General Specifications

·        Filter Format

Sheets

·        Filter Paper/Membrane Color

White

·        Filtration Time

100 s

·        Grade

390

·        Specifications

Narrow-pore, dense, slow filtering

·        Thickness

0.16 mm

Materials of Construction

·        Filter Material

100 % Cotton Linters (> 98 % alpha-cellulose; ash-free)

·        Membrane Material

N/A

Physicochemical Information

·        Pore Size

N/A

·        Precipitations

Fine crystalline

·        Retention Rate

3–5 µm

Product Information

·        Filter Type

Quantitative Filter Papers

·        Pack Size

100

·        Packaging

Non-sterile, bulk packed

Weights

·        Basis Weight

84 g/m²

Filter Papers for the Absorption of Liquids

Whenever a liquid must be captured, Sartorius offers a large variety of paper grades to ensure best results. Filter Papers for Absorption are used not only for general absorption applications but also for blotting, chromatography, seed germination tests or even protection of surfaces.

• Multiple dimensions, thicknesses, particle retentions and colors
• Supplied in rolls, sheets, discs, pleated or in customized formats

Polyethylene-Coated Paper / Grade LabSorb

Labsorb is a surface protection paper. It is a highly absorptive grade of paper coated on one side with polyethylene.

Applications

·        Application Area

Analytical Sample Preparation

Dimensions

·        Dimensions

460 mm × 50 m

·        Filter Diameter

N/A

General Specifications

·        Filter Format

Reels

·        Filter Paper/Membrane Color

White

·        Grade

LabSorb

·        Specifications

Polyethylene coated paper, absorption : 150 %

Materials of Construction

·        Filter Material

Polyethylene Coated Cellulose

·        Membrane Material

N/A

Physicochemical Information

·        Pore Size

N/A

·        Retention Rate

N/A

Product Information

·        Filter Type

Surface Protection Papers

·        Pack Size

1

·        Packaging

Non-sterile, bulk packed

Weights

·        Basis Weight

140 g/m²

Blotting & Chromatography Papers

This highly pure paper grade is not only ideal for blotting and chromatography, but also for a wide range of absorption applications like those common in the life sciences and diagnostics.

Applications

Blotting

Dimensions

·        Dimensions

100 × 100 m

·        Filter Diameter

N/A

General Specifications

·        Capillary Rise / 10 Minutes

70 mm

·        Capillary Rise / 30 Minutes

115 mm

·        Filter Format

Reels

·        Filter Paper/Membrane Color

White

Auto-Star desiccator Vitrum  SICCO

 

 

CE

Technical information

·         Drying performance

·         Open and close the door

 

Suppliers and importers of SICCO-DE are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi

 

 

Description

Product information "Auto-Star desiccator Vitrum | SICCO"

Product description

Aluminum frame with panes made of heat-resistant borosilicate glass 3.3, rear wall made of aluminum, including four intermediate shelves made of stainless steel, hygrometer and mounted drying unit, can be equipped with up to 26 shelves, stackable. A 230 V / 50-60 Hz power connection is required.

Product advantages

» reinforced aluminum frame with panes made of borosilicate glass 3.3
» door with magnetic strip and all-round rubber seal
» non-slip rubber feet
» easy-to-read electronic hygrometer
» variably adjustable intermediate shelves made of stainless steel
» automatic drying (no manual regeneration necessary)
» constantly low humidity in the interior between 20 and 30%
» Intermediate shelves can be pulled out

Applications

Direct storage for long-term storage of hot, oven-dried materials (max. 120 °C). When storing aggressive products, compatibility must be checked.

Thanks to automatic drying, the SICCO automatic desiccators with a constant humidity between 20 and 30% are very suitable for long-term storage. Even frequent opening of the door is automatically compensated for. An ideal storage solution for reference samples, electronic components, photographic equipment, papers, valuable cultural assets and much more.

Elcometer 319 Dewpoint meter:

The Elcometer 319 Dewpoint Meter has been designed to measure and record all the relevant climatic parameters required to determine whether conditions are suitable for painting.

 

The Elcometer 319 Dewpont Meter with temperature sensor is fully designed to measure and record all relevant climate parameters that able to determine correct weather condition for suitable for painting.

 

Important Features:

1. Large easy to read measurements in degrees °C or °F
2. View up to 5 user selectable statistics on screen
3. Review individual readings

 

• A hand-held dewpoint meter with both manual and automatic data logging in one gauge
• Integrated magnets allow the dew point gauge to be attached to the substrate during remote logging
• Stores 25,000 records in up to 999 batches
• Dustproof and waterproof gauge with fully sealed sensors (equivalent to IP66)
• Gauges can be recertified at Elcometer Authorised Service Centres
• Robust temperature sensors
• Easy to use, intuitive menu structure

 

Measure and record climatic parameters: 

1. Relative humidity​
2. Air temperature
3. Surface temperature
4. Dewpoint temperature
5. TΔ (the difference between surface temperature and dewpoint)
6. Dry Bulb temperature
7. Wet Bulb temperature
8. External temperature correction (K-type)
9. Specific Humidity

 

Visual and audible indication of user defined limits for any or all parameters | USB and Bluetooth® data output to ElcoMaster® software

 

Application:

• Coating Inspection
• To check weather/climate condition before painting

Technical specifications

Measures sugar inversion to ensure correct production limits
Determines °Brix fresh/actual/inverted plus degree of inversion
No manual, forced inversion required
Upgradable with %Diet measuring module and sample changer
Combination with CO2 meter allows for QC out of final package

Technical specifications

Lutron YK 2005AM ANEMOMETER, Real time data logger + air flow

 

ANEMOMETER, Real time data logger + air flow
Model : YK-2005AM
* Air velocity : m/S, Ft/min, Km/h, Knots, Mile/h,* Air flow : CMM ( m^3/min. ) and CFM ( ft^3/min. ).
* Air temperature ( , )
* Type K/ Type J thermocouple thermometer
* Real time data logger, build in clock ( hour-min.-sec., year-month-date ).
* Auto data record, 16,000 Data logger no. * High capacity, 16,000 data logger point.
* Wide sampling time adjustment range from two seconds to 8 hours 59 minutes 59 seconds
* RS232 computer interface.
* Can default auto power off or manual power off.
* Can default the air velocity, air flow, Temp. unit.
* Air flow measurement can set the area dimension.
* Multi function with easy operation
* Low-friction ball vane wheels make sure high accuracy in high & low velocities.
* Real time data logger (record year, month, date, hour, minute, second).
* Air velocity, Air flow, Temp., type K Temp.
* Metal vane, heavy duty.
* 0.4 to 30.0 m/s. CMM, CFM.
* Max., Min., Data hold.
* RS-232 computer interface.
* Optional data transmission software, SW-DL2005.
* Jumbo LCD display.
* DC 1.5V (UM3, AA) x 4 PCs or DC 9V adapter in.
* Size : 203 x 76 x 38 mm.
* Price Rs 1000

What are the different types of thermometers used to measure temperature?

The most familiar use of such thermometers is in ear thermometers that measureinfrared radiation from the tympanic membrane (ear drum) to determine body temperature. Other types of infrared thermometers include bolometers and pyrometers.

Being an Largest Importers of Lutron Products in India since 2005. Lutron products are mostly & widely used for everyday in various Pharmaceutical laboratories, Food Laboratories, Universities and for Research applications. Over a long period of time DFT Tech have been established as reliable Suppliers ,Importers and Stockists of Lutron All Range of Products in India, catering to the huge industry markets in Chennai, Bangalore, Coimbatore, Tiruchy, Madurai, Pune, Hyderabad, Ahemdabad, Calcutta, Mumbai and etc...

Apart from that we are supplying our Lutron products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Biotechnology Companies, Microbiology Laboratory, Pharmaceutical Manufacturers, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT Tech Lutron YK 2005AM ANEMOMETER, Real time data logger + air flow Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Lutron YK 2005AM Anemometer Taiwan Make Products in Chennai, Bangalore, and etc..

Thermofisher scientific- Orion AQ3700 AQUAfast Colorimeter:

Product Overview:

Features:

·        Wide range of disinfectants in various formats to broaden our offering to a variety of industries

·        Large graphic display with step-by-step user instructions

·        Automatic countdown to measurement

·        Consistent results from shift to shift

·        Selectable languages of English, French, German, Italian, Spanish, Portuguese (Brazilian), and Polish with other languages uploadable via RJ 45 connection

Requires:

·        4 AA batteries

Recommended for:

·        Wastewater

·        Drinking water

·        Nutrient monitoring

·        Environmental testing

·        Food and beverage

·        Industrial applications

Specifications:

Accuracy             2% Full scale

Backlight Option Yes

Certifications/Compliance FCC Part 15; CE

Cuvette Details    Round 13 mm, 16 mm, 24 mm & 16 mm COD Digestion Tubes

Battery Type       AA

Display Graphic

Languages           English, French, German, Spanish, Italian

Light Source        6 x LED

Product Line        AQUAfast

Type      Colorimeter

Wavelength Range             430, 530, 560, 580, 610, 660 nm

Interface Internal RJ45 port

Keypad Numeric keys, ON/OFF, Up, Down, Enter, Timer, Zero, Test, Cal, Mode, Store, Shift, plus 3 Function keys

Outputs IRDA

Reagent Form      Powder, tablet, liquid, reagent tubes, digestion tubes. Color, Turbidity and Suspended Solids tests do not require reagents

Resolution           ±0.005 A

Sample Size         10 mL

Storage Requirements       5°C to 40°C

Test Method        Up to 90 and 10 user defined programmed methods

Unit Size              Each

Anton Paar- Brabender MetaStation 4

·        Drive for small mixers, single- and twin-screw extruders

·        Application as table-top device possible due to compact design

·        Speed control: 0.2 min-1 to 185 min-1 with 200 Nm max. torque

·        Smart drive and control unit to gain deep process knowledge

·        MetaBridge for analyzing time-dependent process variables

The market-leading Brabender MetaStation is a versatile, modular drive unit and torque rheometer for determining the processability and material characteristics of different plastics and plastifiable substances, compliant with key ASTM standard methods. Tailor it to your specific PVC, rubber, or thermoset testing needs, using our portfolio for varied blade geometries, mixer sizes, and temperature control. In addition to batch-wise compounding and mixing, continuous processes are also possible via the use of single- and double-screw extrusion attachments of different scales. MetaStation: Today's configuration flexibility, tomorrow's infinite possibilities.

Key features

• Your path to worldwide product qualification
• From PVC to thermosets: MetaStation's versatile mixer attachments
• Extrusion insights: Your shortcut to improved product quality
• MetaBridge: Your gateway to data excellence
• Specialized solutions for demanding applications

 

Technical specifications

Anton Paar- Brabender MetaStation 8

·        Drive for mixers and for medium sized lab-scale extruders

·        Ready for higher torque requirements compared to MetaStation 4

·        Speed control: 0.2 min-1 to 200 min-1 with 400 Nm max. torque

·        Smart drive and control unit to gain deep process knowledge

·        MetaBridge for analyzing time-dependent process variables

The market-leading Brabender MetaStation is a versatile, modular drive unit and torque rheometer for determining the processability and material characteristics of different plastics and plastifiable substances, compliant with key ASTM standard methods. Tailor it to your specific PVC, rubber, or thermoset testing needs, using our portfolio for varied blade geometries, mixer sizes, and temperature control. In addition to batch-wise compounding and mixing, continuous processes are also possible via the use of single- and double-screw extrusion attachments of different scales. MetaStation: Today's configuration flexibility, tomorrow's infinite possibilities.

Key features

·        Your path to worldwide product qualification ·        From PVC to thermosets: MetaStation's versatile mixer attachments ·        Extrusion insights: Your shortcut to improved product quality ·        MetaBridge: Your gateway to data excellence ·        Specialized solutions for demanding applications

 

Technical specifications

Bransonic Ultrasonic Cleaners:

General Description Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. • M Series includes 60-minute mechanical timer and continuous operation. • MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features: • Sweep frequency eliminates standing waves and creates consistent cavitation throughout the tank. • 40 kHz rugged industrial transducers. • Controls are located above and behind the cleaning tank in an easily accessible control tower panel, and raised above the tank to avoid damage from cleaning solutions. • Convenient built-in pour drains are featured on .5- and .75-gallon models. Tank drains with valves are incorporated on models 1.5-gallon and larger. • Plastic body, chemical-resistant. • Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. NOTE: Tank cover included. For optimum cleaning results, Branson offers a line of accessories including perforated trays, solid trays, beaker covers and support racks for your application needs.

Application:

It will be specially used for cleaning pores & cold mounted irregular shape samples.

GLUE DISPENSER

ELECTROMAX TECHNOLOGY

We are importers,stockists,and suppliers of

ELECTROMAX TECHNOLOGY India- Chennai Coimbatore ,Madurai, Kerala, Assam, Nagaland, Mizoram, Manipur, Trichy, Hosur, Tumkur, MYSORE, KOLKATA,SALEM ,POONAMALLEE, ,and more.

We at DFT TECH are proud to be Distributors of ELECTROMAX TECHNOLOGY

Product Description

DIGITAL Automatic Glue Dispensing Machine Precise Dispensing Controller Glue Machine With all Accessories

DMA 1001

• The most advanced 4-digit density meter in this price segment
• 100 % consistent results due to repeatability of 0.00005 g/cm³
• Covers ASTM D4052, ASTM D5002, ISO 12185, USP <841>, Ph. Eur. 2.25, JP 17 2.56, ChP(Vol IV) 0601, and FDA CFR 21 Part 11
• Splash-proof, instrument self-diagnosis, no ventilation-related corrosion

Benefits:

·        Upgrade your density measurements and leave your time-intensive, breakage-prone hydrometers behind. Over 60 integrated conversion tables, 400 freely configurable methods, and memory for up to 5000 data logs set the benchmark in this segment. Set up the device once with all your frequently used tests and return to them again and again to immediately see a clear “pass/fail” result based on your defined acceptable upper and lower limits. As DMA 501/1001 requires only 1 mL sample volume you won’t waste valuable product. Both instruments thrive in harsh environments and automatically compensate for external influences such as humidity, altitude, and ambient temperature. When linked to AP Connect, our lab execution software, all data is stored in a single digital space and accessible from any network computer. 

Standard:

ABNT

NBR 140651001

NBR 156391001

ASTM

D12501001

D14751001

D25011001

D40521001

D48061001

D50021001

D59311001

D64481001

Chinese Pharmacopoeia (ChP)

ChP 2020 (Vol IV) 0601501, 1001

DIN

517571001

IP

3651001

ISO

2811-31001

121851001

15212-1501, 1001

183011001

JIS

K 00611001

K 22491001

Japanese Pharmacopoeia (JP)

JP 17 2.561001

 

Technical specification

Benchtop density meter: DMA 5001

• Up to 6-digit accuracy without drifts
• Perfect for highly dense samples
• Auto-correction for highly viscous samples
• Ideal for high-end R&D applications, authorities, and standards organizations

Key features: Guaranteed compliance gives you peace of mind

• Comply with ASTM D4052, D5002, D1250, ISO 12185 petroleum standards, and all relevant pharmacopeias
• Satisfy all major data integrity and traceability standards (e.g., 21 CFR Part 11)
• Ensure your results are traceable to the International System of Units (SI) with ISO 17025 calibration from our accredited lab
• Use our ISO 17034-certified reference material for density to ensure your instrument is perfectly calibrated

Standards

2020 Chinese Pharmacopoeia

0601-relative density determination method4101, 4501, 5001

ABNT

NBR 140654101, 4501, 5001

NBR 156394101, 4501, 5001

AOAC

982.104101, 4501, 5001

ASBC

Beer-2B: Specific Gravity by digital density meter (1978)4101, 4501, 5001

Beer-5: Real Extract (B. Beer measured gravimetrically (1958), C. Real Extract determined refractometrically (1982))4101, 4501, 5001

ASTM

D12504101, 4501, 5001

D14754101, 4501, 5001

D25014101, 4501, 5001

D40524101, 4501, 5001

D48064501, 5001

D50024101, 4501, 5001

D59314101, 4501, 5001

D64484101, 4501, 5001

Technical specification

Density           0 g/cm³ to 3 g/cm³

Temperature  0 °C to 100 °C (32 °F to 212 °F)

Pressure         Up to 10 bar (145 psi) absolute pressure

Density           0.000001 g/cm³

Power features           U-View™, FillingCheck™, ThermoBalance™, full-range viscosity correction

Special functions       QM compliance, temperature scan, built-in ambient pressure sensor, condition monitoring adjustment at high viscosity (only DMA 5001 )

Automation    Automatic sample changers

Modularity      pH, alcohol, CO2, O2, color, turbidity, refractive index

Optional accessories Aerosol adapter, heating attachment

Typical measuring time/sample 40 s

Minimum sample volume      Approx. 1 mL

Wetted materials        PTFE, borosilicate glass

Dimensions (L x W x H)         526 mm x 347 mm x 230 mm (20.7 in x 13.7 in x 9 in)

Weight 22.04 kg (48.6 lbs)

Power supply AC 100 to 240 V, 50/60 Hz, fluctuation ±10 %, 190 VA

Display           10.1" TFT WXGA (1280 x 800 px); PCAP touchscreen

Controls         Touchscreen, optional keyboard, mouse, and barcode reader

Communication interfaces   5 x USB, Ethernet, CAN, RS232

Internal storage         More than 10,000 measuring values with camera images

DMA 35 Standard

• Quality checks in the field, e. g. on wine and wine must (°Brix, °KMW, Oechsle, Baumé)
• Checks for wort and apparent extract in beer (°Plato)
• Fermentation graph for each tank directly on the screen
• One device replaces all glass hydrometers in the workplace

Key features:

Quickly determining the state of charge of lead-acid batteries

• Determination of the specific gravity of sulfuric acid
• Used for measurement of sulfuric acid in lead-acid battery production and maintenance of uninterruptible power supply (UPS) systems
• Protection class IP54 and high chemical resistance

Standards:

ASTM

D7777

Energy Institute

IP 559

ISO

15212-1

Technical specification

DMA 35 Ex

• For measuring flammable chemicals in hazardous environments
• The only intrinsically safe portable density meter on the market (Ex marking [Ex] II 2 G Ex ib IIB T4)
• Leak-proof sealed housing to withstand rough conditions
• Protection class IP54

Key features:

Perfect traceability of density and concentration results

• Storage of up to 250 sample IDs for easy sample identification
• RFID interface for changing measurement settings quickly by reading RFID tags
• Storage of up to 1024 measurement results including time stamp and sample ID
• Wireless data exchange with a PC (csv or txt format) and data export to a printer via Bluetooth® for convenient data handling in the field – no extra software required

Standards:

ASTM

D7777

Energy Institute

IP 559

ISO

15212-1

Technical Specification:

Portable density meter: DMA 35 Ex Petrol

• For measuring petroleum samples in hazardous environments
• The only intrinsically safe portable density meter on the market (Ex marking [Ex] II 2 G Ex ib IIB T4)
• Fully complies with the ASTM D7777 and IP 559 standards
• Protection class IP54

Key features: Perfect traceability of density and concentration results

• Storage of up to 250 sample IDs for easy sample identification
• RFID interface for changing measurement settings quickly by reading RFID tags
• Storage of up to 1024 measurement results including time stamp and sample ID

Standards:

ASTM

D7777

Energy Institute

IP 559

ISO

15212-1

Technical specification

DMA 35 Basic

• Entry-level digital density meter
• Compact and portable density meter, only 345 g
• Ideal for the use in tight spaces or of difficult-to-reach samples
• Results in seconds from only 2 mL of sample
• Fits in your cargo pocket

Features: Smart features to streamline your daily workflow

• Backlit display and measuring cell for convenient operation, also in dark surroundings
• Store and select sample IDs to allocate a measured result to a sampling location
• Stored results are conveniently printed or exported via the integrated IrDA interface

Standards: DIN EN ISO

15212-1

Energy Institute

IP 559

ISO

15212-1

JIS

K 0061

 

Technical specification

• Density meter for heavy petroleum samples
• Compliant with ASTM D4052, ASTM D5002, and ASTM D8188
• 10 times faster measurement than with manual methods like pycnometers (ASTM D70)
• Small sample volume of 2 mL to 3 mL; easy to clean

Key features: Saves you time, money, and solvent

• Small sample volume of 2 mL to 3 mL
• 10 times faster measurement than manual methods like pycnometers (ASTM D70)
• Low solvent consumption for cleaning routines
• Quick cleaning routines

Specification: ABNT

NBR 14065

NBR 15639

ASTM

D1475

D4052

D4806

D5002

D5931

D6448

D7961

D8188

GB

T 2013-2010

T 11540-2008

T 13531.4-2013

ISO

12185

RANP

5

19

20

30

40

45

50

52

58

71

669

764

778

807

U.S. Pharmacopoeia (USP)

USP 841 - Specific gravity

Technical specification: