Instruhub

The INSIZE 2175-360 Electronic Level and Protractor has the following specifications:

• Range: 0-360°
• Resolution: 0.05°
• Accuracy: ±0.05°

Features:

• IP67 dust/waterproof
• Used as level and slope meter
• Aluminum frame, shock absorbing rubber end caps
• Magnetic bottom with V-groove for shafts
• The sea level is permanently set inside the chip, zero setting is not needed when batteries are replaced
• Buttons: ON/OFF, backlight/buzzer alarm, absolute and incremental measurement, unit (mm/m, %, °), HOLD (keep the reading)
• Three AAA batteries, automatic power off

The INSIZE 2198-2 Built-In Bluetooth Digital Level and Slop Meter has the following specifications:

• Range: 4×90°
• Resolution: 0.1° (=.021in/ft)
• Accuracy: at 0°and 90°: ±0.1°; others: ±0.2°

Features:

• Used as level and slope meter
• Aluminum frame
• Magnetic bottom
• The display flips over when the bottom faces up
• The backlight is on automatically when in use, and automatically off in 15 seconds after use
• The sea level is permanently set inside the chip, zero setting is not needed when battery is replaced
• Buttons: ON/OFF, ZERO, HOLD, absolute and incremental measurement
• Built—in Bluetooth, transmission distance is 49.2ft(under the condition of no obstruction and no electromagnetic interference). Android and iPhone APP are included
• One AAA battery, automatic power off in 5 minutes

Flexible Arm Auto Focus Digital Microscope (With Display, With Desktop Clamp) ,20X~123X

• 1080P high-definition image
• Auto focus camera
• Take pictures and videos, saved to USB flash disk
• Picture review, picture comprae
• Automatic exposure and white balance
• Brightness, contrast ratio, gain are adjustable
• Built-in software without computer, operation by mouse
• Flexible arm

Electronic magnification feedback lens: when the objective lens magnification is changed manually, the software automatically selects the corresponding pre-calibration data and calibration is not needed

Type of Product: Digital MicroscopeMagnification: 7.6-49.4XModel No: 5309-DM51Pixels: 2MPower Supply: DC 12 V 3 ASensor: 1/2.8 inch CMOSResolution: 1920x1080Distance: 42-195 mmMemory: Memory CardArm Type: Universal

Elcometer 130 SSP Soluble Salt Profiler:

The Elcometer 130 Soluble Salt Profiler provides fast and accurate measurement of the level and density of soluble salts - over 4 times faster than other Bresle equivalent methods.

Key features of the Elcometer 130 Salt Contamination Meter include:

• Fast reading rate allows multiple tests to be completed efficiently
• Automatic temperature compensation ensures accurate results
• Pressure plate ensures a constant and uniform pressure to paper
• Non-oxidising gold plated contacts ensures lifetime accuracy
• Fully portable hand-held, ergonomic design ideal for use in the field
• Dust and water resistant rugged design equivalent to IP64
• Stores up to 100,000 readings in 1,000 alpha numeric batches
• USB and Bluetooth® data output to ElcoMaster® software

User Friendly

• Large buttons ideal for gloved hands
• Easy to use menus in multiple languages
• High reading limit indicator
• Factory calibrated for immediate use

Accurate

• Conductivity measurement to ±1%
• Can be used in accordance with National and International Standards
• Automatic temperature compensation ensures repeatable, accurate results
• Calibration verification tiles
• Trend and batch readings graph formats for instant on-screen analysis

Reliable

• Repeatable and reproducible measurements
• 2 year gauge warranty
• Supplied with fully traceable Test Certificates
• Batch & individual readings are stored with date and time stamp

Tough

• Heavy duty, impact resistant, dust and waterproof design equivalent to IP64
• Wipe clean sealed unit ideal for harsh environments
• Scratch and solvent resistant display

Efficient

• Instant readings allows multiple tests to be completed efficiently
• Alpha numeric batch identification
• Compatible with ElcoMaster^® and ElcoMaster^®Mobile App
• Calibration offset allows the use of non-pure water up to 2μg/cm²

Powerful

• Measuring range up to 50μg/cm² (3000ppm)
• USB and Bluetooth^® data output to iPhone* or Android™ devices
• Stores up to 100,000 readings in 1,000 batches
• Soluble salt and conductivity meter in one gauge

 

How to use a Salt Contamination Meter

Step 1 : Fill the Syringe with 1.6ml 

Step 2 : By Using Droplet Tweezers, Remove a filter paper from the pack, & place it at non-labelled side of the magnetic disc. Put whole water on paper & remove bubbles.

Step 3 : Put the magnetic disc, with wetted paper face down, by pressing firmly into any counters, So start the 2 min timer on the gauge.

Step 4 : Now remove the filter paper after 2 min and also magnetic disc from the test surface. Place on to the measurements electrodes.

Step 5 : Now Close the lid, You can able to see readings on display monitor with time and date.

Application:

Surface Cleanliness

Star Vitrum Desiccator | SICCO

 

 

Discs:  clear

Use:     Normal pressure

Material:          Borosilicate 3.3

Was standing: Rubber feet

Temperature resistance:           -20°C to +150°C

 

Technical information

·         Drying performance

·         Open and close the door

 

 

 

Product description

Aluminum frame with panes made of heat-resistant borosilicate glass 3.3, including four intermediate shelves made of stainless steel, bowl, hygrometer and drying agent, can be equipped with up to 26 shelves, stackable.

Product advantages

»reinforced aluminum frame with panes made of heat-resistant borosilicate glass 3.3
» door with magnetic strip and all-round rubber seal
» for introducing hot substances (max. 300°C)
» very good resistance to aggressive media
» variably adjustable intermediate shelves made of stainless steel
» easy-to-read electronic hygrometer
» extendable intermediate shelves

Applications

Ideal for introducing hot substances (max. 300°C), very good resistance to most acids and organic substances.

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

 

Maxi 1 desiccator | SICCO

 

 

Product description

Aluminum frame with acrylic glass panes, including four stainless steel intermediate shelves, bowl and hygrometer, four swivel castors, can be equipped with up to 17 shelves.

Product advantages

» reinforced aluminum frame with acrylic glass panes
» door with magnetic strip and all-round rubber seal
» four swivel castors (two of which have locks)
» easy-to-read electronic hygrometer
» variably adjustable intermediate shelves made of stainless steel
» extendable intermediate shelves
» base tray for desiccant

Applications

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

Mini desiccator Secure Box Premium | SICCO

 

 

Technical information

·         Desiccant used correctly

·         Humidity information

 

 

Description

Product information "Mini desiccator Secure Box Premium | SICCO"

Product description

Polycarbonate, door with integrated lock, including two intermediate shelves, hygrometer, desiccant, non-slip feet, stackable.

Product advantages

» One-touch door with all-round seal
» with integrated lock
» robust and lightweight construction
» transparent, break-proof body made of strong polycarbonate
» visible from all sides, glare-free
» revolving door with generous opening angle
» low weight, transportable
» stackable
» Silica gel in a practical, re-closable Tin included

Applications

Safe storage of small parts, very handy.

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

Mini Black Premium Desiccator | SICCO Technical information

·         Desiccant used correctly

·         Humidity information

 

 

 

Description

Product information "Mini Black Premium Desiccator | SICCO"

Product description

Black, opaque polycarbonate prevents light from entering and acts as UV protection, including two intermediate shelves, hygrometer, drying agent, non-slip feet, stackable.

Product advantages

» One Touch Door with all-round seal
» robust and lightweight construction
» shatterproof body made of strong polycarbonate
» revolving door with generous opening angle
» low weight, transportable
» stackable
» Silica gel in a practical, resealable container included in delivery

Applications

Ideal for small parts, very handy.

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

Maxi 1 desiccator Black | SICCO

 

 

Technical information

·         Drying performance Max 1

·         Opening and closing doors - Maxi 1

 

 

Description

Product information "Maxi 1-Desiccator Black | SICCO"

Product description

Aluminum frame, panes made of black, light- and UV-impermeable acrylic glass, high-gloss surfaces, including four intermediate shelves made of stainless steel, tray and hygrometer, four swivel castors, can be equipped with up to 17 shelves.

Product advantages

» black, completely opaque panes
» for storage without light and UV radiation
» door with magnetic strip and all-round rubber seal
» variably adjustable intermediate shelves
» easy-to-read electronic hygrometer
» removable intermediate shelves

Applications

Especially for storing substances with the exclusion of light or UV radiation.

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

Big Star desiccator Protect | SICCO

 

Technical information

·         Drying performance Big Star and Maxi 2

·         Opening and closing doors - Big Star and Maxi 2

 

Suppliers and importers of SICCO-DE are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi

 

 

Description

Product information "Big Star Desiccator Protect | SICCO"

Product description

Aluminum frame, panes made of orange-colored acrylic glass block the light and act as UV protection, including two intermediate shelves made of stainless steel, bowl and hygrometer, can be equipped with up to 8 shelves.

Product advantages

» orange panes block the incidence of light
» especially for storing light-sensitive substances
» door with magnetic strip and all-round rubber seal
» variably adjustable intermediate shelves
» easy-to-read, electronic hygrometer
» removable intermediate shelves

Applications

Particularly suitable for storing light-sensitive substances.

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

Star Desiccator Horizontal | SICCO

 

Discs:  clear

Material:          PMMA

Temperature resistance:           -20°C to +70°C

Use:     Normal pressure

Was standing: Rubber feet

 

 

Description

Product information "Star desiccator horizontal | SICCO"

Product description

Aluminum frame with panes made of acrylic glass, including two intermediate shelves made of acrylic glass, bowl, hygrometer and drying agent, can be equipped with up to 13 shelves, stackable, door opens to the front.

Product advantages

» reinforced aluminum frame with acrylic glass panes
» door with magnetic strip and all-round rubber seal
» non-slip rubber feet
» easy-to-read electronic hygrometer
» variably adjustable intermediate shelves made of acrylic glass
» extendable intermediate shelves
» base tray for desiccant
» silica gel included in delivery with Star desiccators

Applications

Particularly suitable for wide products, e.g. sheets of paper in A3 format or circuit boards.

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

Big Star Desiccator | SICCO

 

Technical information

·         Drying performance Big Star and Maxi 2

·         Opening and closing doors - Big Star and Maxi 2

 

Suppliers and importers of SICCO-DE are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi

 

 

Description

Product information "Big Star Desiccator | SICCO"

Product description

Aluminum frame with acrylic glass panes, including two stainless steel intermediate shelves, bowl and hygrometer, can be equipped with a maximum of 8 shelves.

Product advantages

» reinforced aluminum frame with acrylic glass panes
» door with magnetic strip and all-round rubber seal
» non-slip rubber feet
» easy-to-read electronic hygrometer
» variably adjustable intermediate shelves made of stainless steel
» extendable intermediate shelves
» base tray for desiccant

Applications

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

 

Mini 1 Basic Desiccator | SICCO

 

Technical information

·         Desiccant used correctly

·         Humidity information

 

 

Description

Product information "Mini 1 Basic Desiccator | SICCO"

Product description

Polycarbonate, three versions (one, two or three firmly connected chambers), including desiccant, stackable.

Product advantages

» One Touch Door with all-round seal
» robust and lightweight construction
» transparent, unbreakable body made of strong polycarbonate
» visible from all sides, glare-free
» revolving door with generous opening angle
» low weight, transportable
» stackable
» Silica gel in a practical, resealable container included in delivery

Applications

Ideal for small parts, very handy.

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

Mini Black Basic Desiccator | SICCO

 

Technical information

·         Desiccant used correctly

·         Humidity information

 

Suppliers and importers of SICCO-DE are Kanchipuram,Dharmapuri,Salem,Cuddalore,Ariyalur,Nagapattinam,Tirunelveli,Vellore,Sivagangai

 

 

Description

Product information "Mini Black Basic Desiccator | SICCO"

Product description

Black, opaque polycarbonate prevents light from entering and acts as UV protection, including desiccant, stackable.

Product advantages

» One Touch Door with all-round seal
» robust and lightweight construction
» shatterproof body made of strong polycarbonate
» revolving door with generous opening angle
» low weight, transportable
» stackable
» Silica gel in a practical, resealable container included in delivery

Applications

Ideal for small parts, very handy.

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples.

Star Vitrum Desiccator | SICCO

 

BESTSELLER

Technical information

·         Drying performance

·         Open and close the door

 

Suppliers and importers of SICCO-DE are Kanchipuram,Dharmapuri,Salem,Cuddalore,Ariyalur,Nagapattinam,Tirunelveli,Vellore,Sivagangai

 

 

Description

Product information "Star Vitrum desiccator | SICCO"

Product description

Aluminum frame with panes made of heat-resistant borosilicate glass 3.3, including four intermediate shelves made of stainless steel, bowl, hygrometer and drying agent, can be equipped with up to 26 shelves, stackable.

Product advantages

»reinforced aluminum frame with panes made of heat-resistant borosilicate glass 3.3
» door with magnetic strip and all-round rubber seal
» for introducing hot substances (max. 300°C)
» very good resistance to aggressive media
» variably adjustable intermediate shelves made of stainless steel
» easy-to-read electronic hygrometer
» extendable intermediate shelves

Applications Ideal for introducing hot substances (max. 300°C), very good resistance to most acids and organic substances.

The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples

Star-Vitrum-Desiccator Horizontal |

 

Panels: clear

Use:     normal pressure

Material:          borosilicate glass 3.3

Stand:  rubber feet

Temperature resistance:           from -70°C to +150°C

 

Suppliers and importers of SICCO-DE are Kanchipuram,Dharmapuri,Salem,Cuddalore,Ariyalur,Nagapattinam,Tirunelveli,Vellore,Sivagangai

 

 

Description

Product information "Star-Vitrum-Desiccator Horizontal | SICCO"

Product description

Aluminium frame with panels made of heat-resistant borosilicate glass 3.3, including two shelves made of aluminium, tray, hygrometer and desiccant, usable with up to 13 shelves, stackable, door opens forward.

Product advantages

» Reinforced aluminium frame with heat-resistant borosilicate glass panels
» Door with magnetic catch and circular rubber seal
» For storing hot materials (up to max. 300°C)
» Very good chemical resistance against aggressive products
» Variable height shelves made of stainless steel
» Easy to read electronic hygrometer
» Telescopic shelves

Applications

Especially suitable for storing hot materials (max. 300 °C), very good resistance compared to most acids and organic substances.

 

Mini-Vitrum-Desiccator | SICCO

 

Technical information

·         Proper use of desiccant

·         Information about humidity

 

Suppliers and importers of SICCO-DE are Ramanathapuram,Karur,Thiruvarur,Krishnagiri,Theni,Perambalur,Dindigul,Pudukkottai,Tiruvallur

 

 

Description

Product information "Mini-Vitrum-Desiccator | SICCO"

Product description

Aluminium frame with panels made of heat-resistant borosilicate glass 3.3, including one shelf made of aluminium, hygrometer and desiccant, usable with up to one shelf, stackable.

Applications

Especially suitable for storing hot materials (max. 300 °C), very good resistance compared to most acids and organic substances.

 

Super Star Desiccator | SICCO

 

BESTSELLER

Technical information

·         Desiccant used correctly

·         Humidity information

 

 

Description

Product information "Super Star Desiccator | SICCO"

Product description

Aluminum frame with acrylic glass panes, including four intermediate shelves made of polycarbonate, tray, hygrometer, drying agent, cylinder lock and hose (L = 5 m) with two quick couplings for gassing, can be equipped with up to 26 shelves, stackable.

Product advantages

» reinforced aluminum frame with acrylic glass panes
» door with magnetic strip, all-round rubber seal and cylinder lock
» extra large electronic hygrometer
» variably adjustable intermediate shelves
» extendable intermediate shelves
» two gas supply connections including quick couplings with self-closing valves and hoses

Applications

The SICCO desiccators for fumigation offer ideal conditions for storing toxic chemicals under lock and key. When the door is tightly closed, noble gases or inert gases, such as nitrogen, can be introduced. In contrast to the surrounding air, these do not react with the stored substances due to their inertia.

Super Star Desiccator Vitrum | SICCO

 

Technical information

·         Desiccant used correctly

·         Humidity information

 

Suppliers and importers of SICCO-DE are Chennai,Chegalpattu,kallakurichi,kanchipuram,mayiladurai,kanyakumari,Coimbatore,Namakkal,Ranipet,Tenkasi,thootukudi

 

 

Description

Product information "Super-Star desiccator Vitrum | SICCO"

Product description

Aluminum frame with panes made of heat-resistant borosilicate glass 3.3, including four intermediate shelves made of stainless steel, bowl, hygrometer, drying agent, cylinder lock and hose (L = 5m) with two quick couplings for gassing, can be equipped with up to 26 shelves, stackable.

Product advantages

» reinforced aluminum frame with borosilicate glass panes
» door with magnetic strip, all-round rubber seal and cylinder lock
» extra large electronic hygrometer
» variably adjustable intermediate shelves
» extendable intermediate shelves
» two gas supply connections including quick couplings with self-closing valves and hoses

Applications

Interior made of chemically resistant materials (aluminum, stainless steel, borosilicate glass) for storing aggressive products.

The SICCO desiccators for fumigation offer ideal conditions for storing toxic chemicals under lock and key. When the door is tightly closed, noble gases or inert gases, such as nitrogen, can be introduced. In contrast to the surrounding air, these do not react with the stored substances due to their inertia.

Mini-Desiccator for Gas Filling Basic | SICCO

 

Technical information

·         Proper use of desiccant

·         Information about humidity

 

 

Product information "Mini-Desiccator for Gas Filling Basic | SICCO"

Product description

Polycarbonate, including desiccant and hose (5 m) with two quick couplings for gas filling, stackable.

Product advantages

» One Touch Door with circular seal
» Robust construction
» Transparent, shatterproof cabinet made of polycarbonate
» Superb all-round visibility
» Hinge door with wide opening angle
» Lightweight, transportable
» Stackable
» Two connections for gas filling including quick couplings with self-sealing valves and hose
» Desiccant in a handy, resealable container included in delivery

Applications

SICCO Desiccators for gas-filling provide ideal conditions for safe and secure storing of poisonous chemicals. Rare or inert gas like nitrogen can be introduced as soon as the door is closed tightly. Compared to the ambient air the inert gas does not react with the stored substances.

Super-Star-Desiccator Vitrum | SICCO

 

Technical information

·         Proper use of desiccant

·         Information about humidity

 

 

 

Product information "Super-Star-Desiccator Vitrum | SICCO"

Product description

Aluminium frame with panels made of heat-resistant borosilicate glass 3.3, including four shelves made of stainless steel, tray, hygrometer, desiccant and hose (5 m) with two quick couplings for gas filling, usable with up to 26 shelves, stackable.

Product advantages

» Reinforced aluminium frame with borosilicate panels
» Door with magnetic catch, circular rubber seal and cylinder lock
» Extra big electronic hygrometer
» Variable height shelves
»Two connections for gas filling including quick couplings with self-sealing valves and hose
» Telescopic shelves

Applications

The workspace is made of materials with good chemical resistance (aluminium, stainless steel, borosilicate glass) for storage of aggressive products.

SICCO Desiccators for gas-filling provide ideal conditions for safe and secure storing of poisonous chemicals. Rare or inert gas like nitrogen can be introduced as soon as the door is closed tightly. Compared to the ambient air the inert gas does not react with the stored substances.

Mini-Desiccator Antistatic Premium | SICCO

 

 

Technical information

·         Proper use of desiccant

·         Information about humidity

 

 

 

Product information "Mini-Desiccator Antistatic Premium | SICCO"

Product description

Black, static dissipative polycarbonate, including two shelves made of static dissipative polyethylene, hygrometer and desiccant, non-slip rubber feet, stackable. All materials used can discharge electrostatic charging by means of a grounding cable which can be connected on the back side (bore dia. 4,3 mm).

Product advantages

» One Touch Door with circular seal
» Robust construction
» Shatterproof cabinet made of polycarbonate
» Hinge door with wide opening angle
» Lightweight, transportable
» Stackable
» Desiccant in a handy, resealable container included in delivery

Applications

SICCO Antistatic Desiccators can protect electronic components against humidity and airborne particulate. Electrostatic charges are discharged by a grounding cable and a charge neutral atmosphere is produced inside the desiccator. Antistatic desiccators are mainly used for temporary storage of components for electronic products.

Maxi 2-Desiccator Antistatic | SICCO

 

Technical information

·         Trockenleistung Big Star und Maxi 2

·         Türe öffnen und schließen - Big Star und Maxi 2

 

 

 

Product information "Maxi 2-Desiccator Antistatic | SICCO"

Product description

Aluminium frame with static dissipative panels made of polycarbonate, two compartments and two doors, including four shelves made of stainless steel, two trays and two hygrometers, four casters with static dissipative tread, usable with up to 17 shelves per compartment. All materials used can discharge electrostatic charging by means of a grounding cable which can be connected on the back side (connecting thread M6).

Product advantages

» Reinforced aluminium frame with panels made of antistatic polycarbonate
» Door with magnetic catch and circular rubber seal
» Four casters (two of the casters with brakes)
» Easy to read electronic hygrometer
» Variable height shelves made of stainless steel
» Telescopic shelves
» Connection for grounding cable
» Tray for desiccant

Applications

SICCO Antistatic Desiccators can protect electronic components against humidity and airborne particulate. Electrostatic charges are discharged by a grounding cable and a charge neutral atmosphere is produced inside the desiccator. Antistatic desiccators are mainly used for temporary storage of components for electronic products.

Mini-Desiccator Antistatic Basic | SICCO Technical information

·         Proper use of desiccant

·         Information about humidity

 

 

 

Product information "Mini-Desiccator Antistatic Basic | SICCO"

Product description

Black, static dissipative polycarbonate, including desiccant, stackable. All materials used can discharge electrostatic charging by means of a grounding cable which can be connected on the back side (bore dia. 4,3 mm).

Product advantages

» One Touch Door with circular seal
» Robust construction
» Shatterproof cabinet made of polycarbonate
» Hinge door with wide opening angle
» Lightweight, transportable
» Stackable
» Desiccant in a handy, resealable container included in delivery

Applications

SICCO Antistatic Desiccators can protect electronic components against humidity and airborne particulate. Electrostatic charges are discharged by a grounding cable and a charge neutral atmosphere is produced inside the desiccator. Antistatic desiccators are mainly used for temporary storage of components for electronic products.

Star desiccator | SICCO

 

Technical information

·         Drying performance

·         Open and close the door

 

 

Description

Product information "Star desiccator | SICCO"

Product description

Aluminum frame with acrylic glass panes, including four intermediate shelves made of polycarbonate, tray, hygrometer and drying agent, can be equipped with up to 26 shelves, stackable.

Product advantages

» reinforced aluminum frame with acrylic glass panes
» door with magnetic strip and all-round rubber seal
» non-slip rubber feet
» easy-to-read electronic hygrometer
» variably adjustable intermediate shelves made of acrylic glass
» extendable intermediate shelves
» base tray for desiccant
» silica gel included in delivery with Star desiccators

Applications The SICCO desiccators for drying and storage are suitable for moisture-repellent storage or drying using silica gel. At the same time, the tightly sealing door protects against contamination from the surrounding air. For example, the indoor conditions are optimal for storing reference materials, retention samples, metallographic sections, tobacco leaves and even DNA samples

LAB APPLICATION ULTRASONIC BATHS Exporters

WEIBER now introduces special baths that uses ultrasound (usually from 20–400 kHz) and an appropriate cleaning solvent (sometimes ordinary tap water) to clean items. The contaminants can be dirt, oil, grease, buffing/polishing compounds, and mold release agents. Ultrasonic bath is powerful enough to remove tough contaminants, yet gentle enough not to damage the substrate. It provides excellent penetration and cleaning in the smallest crevices and between tightly spaced parts in a cleaning tank.

Our digitally controlled ultrasonic baths offer consistent and reliable performance in a variety of environments such as laboratory, scientific and healthcare. Incorporating frequency LEAP technology to ensure uniform levels of ultrasonic activity throughout the fluid, these baths offer vastly improved performance giving a more accurate and precise ultrasonic process.

 

 

 

Suppliers and importers of forensics detectors are Ramanathapuram,Karur,Thiruvarur,Krishnagiri,Theni,Perambalur,Dindigul,Pudukkottai,Tiruvallur

 

 

·         SPECIAL FEATURES

• Frequency LEAP technology provides more homogeneous ultrasonic activity throughout the tank, reducing dead spots and standing waves
• Temperature range from Heated ambient +5ºC to 70ºC
• SD port allows easy validation tracking between bath and PC.
• Improved software memory logs cleaning parameters allowing easy cycle repeatability and easytraceability of cycle number, time, temperature and Sonics validation
• Easy to use digital LCD control panel with user - settable parameters to suit individual requirements.
• Accurate process control of time, temperature, ultrasonic activity, degas and power
• Stainless steel basket - designed specifically to generate maximum ultrasonic activity, prevent items resting on the tank and prevent operators coming into contact with chemical solutions. Included as standard.
• Ergonomic ABS plastic lid - reduces noise volume and minimizes potential of aerosol escape. Included as standard.
• Drain valve for convenient emptying
• Clean finish, high-quality and robust design for long-term reliability and durability.
• Analogue timer (digital timer optional)
• Digital microprocessor based temperature controller

 

 

·      

Digital Measuring Microscopes

         PRODUCTS       MICROSCOPES    DIGITAL MEASURING MICROSCOPES

 

Sipcon digital microscopes come with high resolution digital camera instead of an eyepiece so that you can easily view your parts on a monitor. With built in Autofocus function this microscope increases the throughput by reducing the time to focus the part every time.

Salient Features

·          Magnification range from 4X-132X

·          Built in Auto Focus

·         Multiple illumination options

·         Image capture option

 

The microscope has built-in LED illuminator for surface inspection, ability to create auto-focus images and angled lighting options, provides more image resolution than eyepieces, and outstanding flexibility to handle a wide range of applications.

SPECIFICATIONSMAXY-140MAXY-40Magnification3x - 43x on 24' monitor12x - 132x on 21.5" monitor per 4x LensWorking Distance20mm - 300mm ( * )22.5mm - 226mmField of View11 - 142 mm ( * )3.6 - 40 mmCMOS Sensor2M pixels2M pixelsSignal OutputFull HD 1080PFull HD 1080P & 60 fpsDimension68(L) x 66(W) x 169(H) mm106 x 152(H)mmLensC-Mount Lens4x ObjectiveLight SourceGooseneck light, adjustableWide angle LEDPower SupplyDC 5V/2A , Cable Length 180cmFocusIR Remote Control Focus System for optional manual focus and Auto-focus

STandard Laboratory Vacuum Pump

Standard Vacuum Pump Series:
Has the features of continuous oil-free pumping, low noise level, higher efficiency, and long lifetime.

 

Suppliers, dealers and importers of MarForm MMQ 400 In Ananthapur Chithoor, Cuddapah,

ITEM31

Stainless Steel 6-Branches Vacuum Filtration Assembly

No.: SLSSF03001
Branch: 6-branch
Funnel Size: 300 mL
Funnel: SS316L
Support Screen: SS316L
Screen Pore Size: 100 μm
Connection: Stopper SS316L
Flask: 1000 mL

Suppliers, dealers and importers of MarForm MMQ 400 In Ananthapur Chithoor, Cuddapah, Guntur, Srikakulam, East Godavari, West Godavari, Prakasam, Krishna.

Description of Stainless Steel 6-Branches Vacuum Filtration Assembly

Hawach stainless steel six-branches vacuum filtration assembly is a new type of solution filtration device used in chemical laboratories; one sample of large amounts can be filtered simultaneously in the six branches, which greatly improves the efficiency of experimental work.

Advantages

• The low-height design of the six-unit SS vacuum filtration assembly is suitable for operation on the aseptic workbench;
• A funnel with cover and air filter can be installed in the central vent hole to avoid secondary pollution in suction filtration;
• There is a built-in scale inside the funnel, which is convenient for quantitative sample addition;
• Sintered stainless steel filter membrane support net to ensure uniform distribution of trapped microorganisms on the surface of the filter membrane;
• Individual control valve, convenient to operate several filtration processes at the same time;
• Stable low center of gravity design to make sure no falling over during the filtering process;
• Using 316L stainless steel material, with good corrosion resistance, and can be sterilized at high temperatures.

Features of SS Vacuum Filtration Assembly

• Reasonable structure, easy cleaning, and operating;
• Test one sample with high effectiveness;
• 3/6-branch glass/ stainless steel;
• 47mm or 50mm diameter membrane;
• Acid resistance, alkali resistance, and fast filtering speed for the 316L version;
• Can work under 180°C – 200°C high temperature;
• Individual control valve, convenient to operate several samples filtration at the same time;
• Suggest together with SLVPGM050B pump.

Applications

• Continuous filtration;
• Microbiological fluids removal and particle analysis;
• Filtration of biological solutions (proteins).

This type of vacuum filtration assembly is widely used in chemical analysis, instrument analysis, health inspection, the pharmaceutical industry, biological products and pesticides, petroleum, environmental monitoring, tap water, sewage bacteria, and other aspects of liquid filtration

ISO Impact Tester:

Falling Weight Test, 2 kg weight and punch in one part

• Note: Die and falling weight must be ordered separately.

Features:

The ISO Impact Tester is specifically designed for ISO method 6272-1.

·        Anodized guide tube with scale

·        Clamping device to hold the sample in place

·        Optional weights

·        Indenter built into the weight

Technical Specifications

• Scale

Metric, English

General

• Weight

9.4 kg

• Weight

20.7 lb

• Dimensions: L x W x H

25 x 25 x 127 cm

• Dimensions: L x W x H

10 x 10 x 50 in

Standards:

ISO          6272-1

Anton Paar-pH 3201

·        Suitable for operation in Packaged Beverage Analyzers with operating pressures up to 6 bar
·        Automatic pH value correction for impact of dissolved CO2
·        Simultaneous analysis of pH, along with other quality parameters  
·        Fully guided adjustment and calibration procedures

The pH 3101 and pH 3201 measuring modules- integrated in a beverage analyzing system or Packaged Beverage Analyzer – enable simultaneous determination of pH value and other quality parameters. Versatile configurations allow pH measurements at pressures of up to 6 bar in a variety of liquids from all types of beverages to chemicals. Integration into Anton Paar’s modular measurement solutions streamline analysis and increases productivity in your laboratory analysis – all relevant results are delivered in 3 to 4 minutes only.

Key features

·        Obtain the pH value automatically along with other parameters ·        Master instrument guides through workflow adjustment ·        Analysis of a wide variety of samples ·        Fill sample from a package with zero CO2 influence

 

Technical specifications:

Product Details:

2 models available depending on applications: up to +500°C for high temperature life tests or heat resistance tests; up to +700°C for ceramics baking process, or heat resistance tests for highly functional glass and hybrid polymer materials. The +700°C-type features ceramic fiber and aluminum foil for heat insulation. Various safety mechanisms and protection devices are equipped as standard.

Product Details:

High performance in a compact design, Efficient environment testing achieved by networking of a bench-top size that can fit on a personal desk, this small temperature and humidity chamber achieves high performance to fulfill your environmental testing needs. This lineup includes 10 models to select from, depending on the desired temperature (humidity) range. A model achieving heat up and pull down rate of 5k/min. has also been prepared to meet recent requirements of various industries. Featuring a touch screen color display for easy operation, the controller carries the same function and design of the Platinous J chambers.

Product Details:

High performance and reliability in a compact package covers from an ultra-low temperature. Thanks to N-Instrument and its optional Ethernet connection, you can control and monitor the chamber remotely via web browser. It supports languages English, Russian and Japanese.

Product Details:

Prevents an explosion in heat treatment and drying materials which include volatile solvent:

• Some synthetic resin and coating materials include volatile solvent. 
• The heat treatment, drying and temperature characteristics test of these materials have possibility of explosion with using the conventional chamber because it employed air circulating method and the concentration of the flammable gases generated became high.
• ESPEC all-exhaust temperature chamber controls gas concentration increase and prevents an explosion by all-exhaust method (non-circulating method).

Features:
High-safety all-exhaust method:

• The air in the chamber is exhausted to the outside. The chamber is filled with fresh air heated by heater.

Adopted uninterruptible power supply:

• An uninterruptible power supply is adopted to prevent circulating mechanism from stopping by power failure. Additional safety is pursued by using such optional equipment as gas detector.

Equipped with explosion vent (safety door):

• Controlling gas concentration low can not prevent explosion totally. Some gases may explode even if their concentrations are low. In those cases, the explosion vent will protect you.

Contamination control of specimens:

• The specimen is protected from contaminations caused by substances generated when specimen are heated.

Construction:

• The air is heated in the suction box and introduced to chamber.
• The air in the chamber is not circulated and exhausted to outside.

Product Details:

This chamber subjects specimens not only to temperature, humidity, and other atmospheric environmental stress but also to vibration, shock, acceleration and other physical (mechanical) environmental stress. Based on the Platinous series Temperature (& Humidity) Chamber, this model was jointly developed with vibration system manufacturers, which have a wealth of experience with vibration systems. These models use the same touch panel instrumentation screen adopted Platinous series.

Product Details:

Supports various solar cell module tests: 

• The test area dimensions of the FM Chamber can accommodate changes in units of 50 mm according to the module size and number inserted. 
• The chamber support various IEC standard tests.
• It can also be used as a temperature and humidity chamber for PID evaluation by adding insulation measures and high-voltage static charge prevention measures.

Features:

• Jig for easy handling of large modules (optional)
• Supports insulation measures and high-voltage static charge prevention measures. (Optional)

Product Details:

The Platinous series lets you can select from a variety of sizes, ranges, and options to meet your specific environmental testing requirements. 

ESPEC Platinous series include features for quality and reliabile operation: 

• Stainless steel exterior
• Energy-efficient refrigeration with exclusive electronic expansion valve system
• Specialized humidity generation and control
• Unique thermal break construction for extreme testing
• Casters, cable port, shelf, & USB port standard
• ETL-listed electrical panel conforming to UL 508A

A new streamlined controller:

• ESPEC makes operating an environmental test chamber easier than ever with the new P-300 controller. An updated ‘tabbed’ user interface allows faster access to any screen. Standard USB and optional Ethernet interfaces make programming and data acquisition much simpler. In addition, improved algorithms make control faster and smoother.

Improved programming and data collection via computer:

• Standard USB port for uploading and downloading test programs and operation datalogs.
• Optional remote monitoring, programming, and data collection via our Ethernet/LAN-based Web Controller
• Direct access via optional RS-232 serial port or GP-IB/LabView.

Energy-saving operation:

• Built into the P-300 controller are improved control algorithms for more efficient chamber operation. Invisible to the end user, the P-300 uses advanced control of an electronic expansion valve to save energy and improve control of the refrigeration system. Additional improvements in refrigeration and heater operation make the new generation of ESPEC Platinous chambers the most energy efficient ever.

Product Details:

• Well Thought-out Cabinet Design
• Stainless steel interior with rounded corners - superior to square, welded corners
• Stainless steel exterior construction for durability over time
• Optional viewing window with full-pane heaters to help keep condensation and frost clear. Provides great visibility into the chamber.
• Chamber light built into the window for easy viewing without glare
• One 4" diameter cable port, centered in the left wall (additional ports optional)
• One stainless steel shelf with adjustable support rails (not clips)
• Heavy-duty casters with adjustable leveling feet
• Hinged service panels for easy access

Helpful Operational Features:

• Independent "Product Temp. Protector" with user-set limits, part of a three-tier safety system
• Electrical disconnect switch is included, with lock-out/tag-out

1. Total magnification (standard configuration): 50-500 times, 100 times objective lens (dry) is optional, and the magnification is up to 1000 times.

2. Optical system: infinite color difference correction optical system, with better image quality, higher resolution and more comfortable observation;

3. Objective lens: long working distance professional metallographic objective lens, providing good resolution and clear image

4. Eyepiece: high eye point, ultra wide field of view, flat field eyepiece, pl10x / 22mm, providing wider and flat observation space, and can be equipped with various micrometers for measurement;

5. Observation cylinder: hinged three eyes, adjustable visibility, 45 ° tilt, capable of photographing, collecting and saving observation images, and configuring computers and professional software to realize image analysis;

6. Focusing mechanism: low hand coarse fine-tuning coaxial focusing mechanism, with coarse adjustment elastic adjustment device, coarse adjustment stroke of 10mm per revolution, fine adjustment of 0.2mm per circle and grid value of 0.002mm;

7. Lighting system: reflective Cora illuminator with variable aperture and central adjustable field of view aperture, adaptive 100v-240v wide voltage, 12v50w imported halogen lamp, effectively protecting and prolonging the service life of halogen bulb;

8. Stage: super large working stage, with an area of 210 × 180mm, moving range 50 × 50mm, vernier scale 0.1mm

9. Adjustable field of view light bar and aperture light bar to provide good contrast

10. Polarizing and checking insert can provide polarizing observation.